Surface wear is a major hindrance in the solid/solid interface of triboelectric nanogenerators (TENG), severely affecting their output performance and stability. To reduce the mechanical input and surface wear, solid/liquid-interface alternatives have been investigated; however, charge generation capability is still lower than that in previously reported solid/solid-interface TENGs. Thus, achieving triboelectric interface with high surface charge generation capability and low surface wear remains a technological challenge. Here, we employ metallic glass as one triboelectric interface and show it can enhance the triboelectrification efficiency by up to 339.2%, with improved output performance. Through mechanical and electrical characterizations, we show that metallic glass presents a lower friction coefficient and better wear resistance, as compared with copper. Attributed to their low atomic density and the absence of grain boundaries, all samples show a higher triboelectrification efficiency than copper. Additionally, the devices demonstrate excellent humidity resistance. Under different gas pressures, we also show that metallic glass-based triboelectric nanogenerators can approach the theoretical limit of charge generation, exceeding that of Cu-based TENG by 35.2%. A peak power density of 15 MW·m-2 is achieved. In short, this work demonstrates a humidity- and wear-resistant metallic glass-based TENG with high triboelectrification efficiency.
Multimodal haptic perception is essential for enhancing perceptual experiences in augmented reality applications. To date, several artificial tactile interfaces have been developed to perceive pressure and precontact signals, while simultaneously detecting object type and softness with quantified modulus still remains challenging. Here, inspired by the campaniform sensilla on insect antennae, we proposed a hemispherical bimodal intelligent tactile sensor (BITS) array using the triboelectric effect. The system is capable of softness identification, modulus quantification, and material type recognition. In principle, due to the varied deformability of materials, the BITS generates unique triboelectric output fingerprints when in contact with the tested object. Furthermore, owing to the different electron affinities, the BITS array can accurately recognize material type (99.4% accuracy), facilitating softness recognition (100% accuracy) and modulus quantification. It is promising that the BITS based on the triboelectric effect has the potential to be miniaturized to provide real-time accurate haptic information as an artificial antenna toward applications of human-machine integration.
CO2pumped into nanogenerators in ocean for wave energy collection can offset carbon emissions, producing eco-friendly energy. LCA shows that the production of 1 kW of electricity emits approximately 42 g of carbon dioxide, which is comparable to traditional wind energy.
The surface charge decay is observed at high temperatures due to thermionic emission, which, however, may not be the only mechanism contributing to the surface charge variation. Here, a triboelectric charge promotion strategy due to the heat‐excitation effect of hot electrons near the fermi level is demonstrated, while the final charge is determined by the balance between thermionic emission and the heat‐excitation effect. It is demonstrated that metals with lower work function exhibit a better heat excitation capability, and polymers with lower fluorine content in molecule chains further boost the charge output, where metal/Kapton pairs demonstrated a charge promotion of over 2 times at the temperature of 383 K with good durability during 90 min measurement. The heat‐excitation effect and charge durability in sliding freestanding‐triboelectric‐layer (SFT) mode triboelectric nanogenerator (TENG) is demonstrated as well, where the energy is promoted by over 3 times and the capacitor charging speed is doubled as well, with an energy promotion from 109.34 to 373 µJ per cycle to successfully trigger a discharger. This work suggests a promising future of the heat‐excitation effect as a new charge promotion strategy for TENG toward different applications in high‐temperature environments.
This study presents the design and analysis of a thermal energy harvester that integrates a thermoacoustic engine (TAE) with a honeycomb-structured triboelectric nanogenerator (H-TENG), referred to as TAEH-TENG. This design is specifically developed to demonstrate the potential of thermal energy harvesting for low-power Internet of Things (IoT) applications. By leveraging the high energy conversion efficiency of TAEs and the exceptional robustness of H-TENGs, this harvester overcomes the limitations of traditional designs, which often involve complex or costly components. The experimental results revealed the oscillation characteristics of the TAEH-TENG: by utilizing a hot heat exchanger (HHE) with a length of 10 cm, the system can sustain oscillation over 150–350 °C. Furthermore, the harvester is capable of generating an open-circuit voltage of 25 V, an RMS current of 0.98 μA, and a peak power output of 0.48 mW, representing the highest power output achieved to date in comparison to previous studies. To further showcase the harvester's capability, an ultra-low-power IoT node was developed. Solely powered by the TAEH-TENG, the IoT node achieved cold-start, conducted in situ temperature measurement five times, and transmitted the data via Bluetooth within 120 s. This study not only showcases a fully self-powered IoT application but, more importantly, significantly advances the technology beyond the previous limitations faced by thermoacoustic and triboelectric integrations. By demonstrating the capability to power an ultra-low-power IoT node, this research highlights the TAEH-TENG's potential for practical, real-world energy solutions, marking a significant milestone in the deployment of heat-powered IoT applications.