Yuan Yao

Prof. Yuan Yao


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 July 2011 in Vehicle System Dynamics
Verified
Journal Article
Closed access
YYYuan Yao
Yuan Yao
ZHZhang Hong-Jun
Zhang Hong-Jun
LYLi Ye-Ming
Li Ye-Ming
LSLuo Shi-Hui
Luo Shi-Hui
In order to study the dynamic behaviours of locomotives under saturated adhesion, the stability and characteristics of stick–slip vibration are analysed using the concepts of mean and dynamic slip rates. The longitudinal vibration phenomenon of the wheelset when stick–slip occurs is put forward and its formation mechanism is made clear innovatively. The stick–slip vibration is a dynamic process between the stick and the slip states. The decreasing of mean and dynamic slip rates is conducive to its stability, which depends on the W/R adhesion damping. The torsion vibration of the driving system and the longitudinal vibration of the wheelset are coupled through the longitudinal tangential force when the wheelset alternates between the stick and the slip states. The longitudinal oscillation frequencies of the wheelset are integral multiples of the natural frequency of torsion vibration of the driving system. A train dynamic model integrated with an electromechanical and a control system is established to simulate the stick–slip vibration phenomenon under saturated adhesion to verify the theoretical analysis. The results show that increases of the longitudinal axle guidance stiffness and the motor suspension stiffness are beneficial to the stick–slip vibration stability and the locomotive's traction ability. The optimised matching of the longitudinal axle guidance stiffness and the motor suspension stiffness are helpful to avoid longitudinal resonance when the stick–slip vibration occurs.

11 June 2019 in International Journal of Rail Transportation
Verified
Journal Article
Closed access
YYYuan Yao
Yuan Yao
GLGuang Li
Guang Li
GWGuosong Wu
Guosong Wu
ZZZhenxian Zhang
Zhenxian Zhang
JTJiayin Tang
Jiayin Tang
Hunting stability of high-speed train is an important objective for the optimization of bogie suspension parameters. An adequate hunting stability margin is required for the high-speed train. Besides, a remarkable ability to resist the influence caused by the disturbance of bogie suspension parameters and wheel-rail contact parameters on hunting stability is also required. In this paper, the concept of robustness of hunting stability is proposed, and the indexes for vehicle speed robustness, suspension parameter robustness, and wheel-rail contact equivalent conicity robustness are defined and chosen as the optimization objectives for the bogie suspension parameters. The multi-objective optimization method is used, which can optimize the key suspension parameters simultaneously to balance the multiple complicated and conflicting performance indexes, and six groups of typical suspension parameters are obtained by cluster analysis of Pareto frontier. The correlation between suspension parameters and each index is analysed by multivariate statistical analysis, and the optimization and matching rules for key suspension parameters of the high-speed train bogie based on hunting stability robustness are obtained. With the application of this method during the design process of suspension parameters, the hunting stability of high-speed trains in service can be greatly improved.

4 March 2021 in International Journal of Rail Transportation
Verified
Journal Article
Closed access
XCXiangwang Chen
Xiangwang Chen
YYYuan Yao
Yuan Yao
LSLongjiang Shen
Longjiang Shen
XZXiaoxia Zhang
Xiaoxia Zhang
Excellent hunting stability is required for the operation of high-speed trains. The suspension parameter design needs to avoid primary and secondary hunting instability for the low and high wheel–rail contact conicity, respectively, as well as to enhance the robustness of hunting stability in face of the variations in wheel–rail contact parameters. In this paper, the indices of low equivalent conicity stability, high conicity stability, and equivalent conicity robustness are defined and chosen as the optimization objectives for the optimal design of key suspension parameters. The multi-objective optimization method is used, and the obtained Pareto set can guide the matching laws of suspension parameters. Four groups of typical parameter sets are selected, and their stability characteristics, such as speed robustness and equivalent conicity robustness, are analysed in detail, followed by the selection of equivalent conicity and motor flexible suspension parameters. Two parameter design modes for the hunting stability can be reflected.

23 September 2021 in Vehicle System Dynamics
Verified
Journal Article
Closed access
GLGuang Li
Guang Li
RWRuidong Wu
Ruidong Wu
XDXiaoxing Deng
Xiaoxing Deng
LSLongjiang Shen
Longjiang Shen
YYYuan Yao
Yuan Yao
Suspension parameters optimisation and matching is a very important topic in the design of railway vehicles, and a reasonable combination of suspension parameters is the most powerful guarantee for safe and stable operation. However, most of the existing research about that still belongs to single-objective optimisation and pays little attention to the matching relationship between different suspension parameters, which has plenty of limitations. Therefore, the lateral stability and ride comfort of a certain type of domestic high-speed locomotive are studied and optimised through the genetic algorithm NSGA-II, to find the optimal lateral dynamic performance. It can be found that there is an obvious contradiction between linear stabilities under low-conicity and high-conicity conditions, but a strong positive correlation between low-conicity stability and lateral ride comfort in a low-conicity condition. Besides, the matching relation of the six key suspension parameters is explored employing data analysis methods, such as global sensitivity and clustering analysis, and three types of parameter combinations are proposed. In addition, the speed robustness and rail cant robustness regarding the three types of parameter combinations are analyzed, and the lateral dynamic performance characteristics of each parameter combination type are summarised.

3 April 2022 in Vehicle System Dynamics
Verified
Journal Article
Closed access
YYYuan Yao
Yuan Yao
XCXiangwang Chen
Xiangwang Chen
HLHu Li
Hu Li
GLGuang Li
Guang Li
An adequate hunting stability margin is required through the optimisation and matching of bogie suspension parameters for high-speed trains. Moreover, the dynamics design is particularly important for the robust lateral stability to adapt to wheel–rail wear and track deformation. The hunting stability margin of vehicles, as well as the wheel–rail contact state adaptability should be taken into account. In this regard, the robust hunting stability Pareto optimisation of bogie suspension parameters for different wheel–rail wear stages is executed. A method for the centralised optimisation of key bogie suspension parameters based on vehicle lateral robust stability is presented, and the principle of two typical parameters matching for high-speed vehicles is summarised. In addition, in order to make the vehicle automatically adapt to different wheel–rail geometry contact states without any sensors and control systems, a new idea of frequency-dependent stiffness (SDF) of yaw damper is proposed to ensure the lateral stability margin especially in extreme wheel–rail contact states, which is verified through the vehicle linear system stability and ride comfort comparative analysis. Finally, the adaptive stabilisation mechanism of the vehicle with the frequency-dependent stiffness of yaw damper is clarified.

31 May 2013 in Vehicle System Dynamics
Verified
Journal Article
Closed access
YYYuan Yao
Yuan Yao
XZXiao-Xia Zhang
Xiao-Xia Zhang
HZHong-Jun Zhang
Hong-Jun Zhang
SLShi-Hui Luo
Shi-Hui Luo
To investigate the stability mechanism of a type of heavy-haul coupler with arc surface contact, the force states of coupler were analysed at different yaw angles according to the friction circle theory and the structural characteristics of this coupler were summarised. A multi-body dynamics model with four heavy-haul locomotives and three detailed couplers was established to simulate the process of emergency braking. In addition, the coupler yaw instability was tested in order to investigate the effect of relevant parameters on the coupler stability. The results show that this coupler exhibits the self-stabilisation and less lateral force at a small yaw angle. The yaw angle of force line is less than the actual coupler yaw angle which reduces the lateral force and the critical instability. An increase in the friction coefficient of the arc contact surfaces can improve the stability of couplers. The friction coefficient needs to be increased with the increase in the maximum coupler longitudinal compressive force. The stability of couplers is significantly enhanced by increasing the secondary suspension stiffness and reducing the clearance of the lateral stopper of the locomotives. When the maximum coupler compressive force reaches 2500 kN, the required friction coefficient reduces from 0.6 to 0.35, which notably lowers the derailment risk caused by the coupler. The critical instability angle of the coupler mainly depends on the arc contact friction coefficient. When the friction coefficient is 0.3, the critical instability angle was 4–4.5°. The simulation results are consistent with the locomotive line tests. These studies establish meaningful improvements for the stability of couplers and match the heavy-haul locomotive with its suspension parameters.