In ultraviolet (UV) communication, On–Off Keying (OOK) is the primary modulation technique. Compared to OOK, frequency modulation offers stronger resistance to path attenuation. Currently, research on frequency modulation demodulation schemes for UV communication is limited, mainly employing waveform detection and laser pulse response methods, which require high detection sensitivity to light. This study presents a novel frequency modulation communication scheme using discrete Poisson channel distribution and optical pulse signal processing algorithms, enhancing the signal processing sensitivity of the existing frequency modulation scheme to the level of photons. The proposed system model is rigorously evaluated through theoretical derivations and simulations. Additionally, a hardware system integrating optical pulse counting, frequency detection, and clock data recovery algorithms is developed. Experimental results show the system achieving a 5 kbps transmission rate under frequency modulation. In non-line-of-sight (NLOS) scenarios, communication reaches up to 65 m, with the receiver elevation angle ranging from 10° to 25° and the bit error rate (BER) stabilized at 10⁻⁴, while in line-of-sight (LOS) situations, the BER remains at 10⁻⁵ up to 400 m and 10⁻⁴ up to 700 m, achieving the farthest distance and fastest communication rate achievable in the current FSK modulation scheme of ultraviolet communication systems. The integrated components enhance its applicability in communication systems. This study offers a valuable addition to UV communication technology.

In this paper, a novel ultraviolet (UV) scatter communication scheme is presented, designed to dynamically adjust the signal duty cycle to optimize on–off keying (OOK) modulation and reduce the bit error rate (BER), particularly under varying rate settings. This approach addresses the significant challenge posed by LED tailing effects, which cause signal fluctuations and increase BER in high-speed communications. This BER suppression scheme is proposed for the first time in UV communication research, enhancing communication performance without the need for additional hardware or complex algorithms. A UV communication model that incorporates both path loss and LED tailing effects is introduced, with the probability density function of the signal from transmitter to receiver derived. By varying the signal duty cycle, tailing-induced BER is effectively minimized. Additionally, a closed-form expression for signal transmission BER using a single-scattering model is provided, and the proposed UV communication system is validated through comprehensive simulations and experimental tests. The results indicate that LED tailing has a pronounced impact on BER at higher communication speeds, while its effects are less significant at lower speeds. By optimizing the duty cycle parameters for various communication rates, findings demonstrate that lower duty cycle settings significantly reduce the BER at higher speeds. This further demonstrates the excellent performance of the proposed UV communication solution for OOK-modulated optical communication.

This study focuses on a 4FSK-modulated ultraviolet (UV) communication system, introducing an innovative symbol-level maximum likelihood decoding approach based on Poisson statistics. A forward error correction (FEC) coding mechanism is integrated to enhance system robustness. Through Monte Carlo simulations, the proposed decoding scheme and the error correction performances of Reed–Solomon (RS) and Low-Density Parity-Check (LDPC) codes are evaluated in UV channels. Both RS and LDPC codes significantly improve the Bit Error Rate (BER), with LDPC codes achieving superior gains under low SNR conditions. Hardware implementation and field tests validate the decoding algorithm and LDPC-optimized 4FSK system. Under non-line-of-sight (NLOS) conditions (10–45° transmit elevation angle), stable 60 m communication with BER < 10⁻³ is achieved. In line-of-sight (LOS) scenarios, the system demonstrates 900 m range with BER < 10⁻³, highlighting practical applicability in challenging atmospheric environments.