In the design of metamaterials, combining two active materials is acknowledged as an effective strategy for independently manipulating multi-band terahertz wave absorption. However, maneuvering two active materials requires a dual-physical field that is inherently complex and may reduce the modulation sensitivity due to hysteresis effects. In this paper, we present a design for a terahertz absorber based on a single active material that utilizes double-layer graphene arrays to achieve independently tunable dual-broadband absorption. The results show that dual-broadband with more than 90% absorption is obtained in the frequency ranges of 1.03–1.55 THz and 3.59–4.20 THz. Physical mechanistic analysis reveals that dual-broadband originates from hybridized plasmonic mode and localized surface plasmon resonance formed by the lower and upper graphene layers, respectively. Electrically controlling the corresponding graphene layer can implement independent active frequency and amplitude tunability of dual-broadband absorption, with modulation depths of 61.2% and 68.4%. The absorber exhibits polarization insensitivity and maintains dual-broadband absorption properties for a wide range of incidence angles. Moreover, the influence of slight dimensional variations in graphene patterns on absorption properties is also investigated. This dual-broadband absorber allows for independent active control of different parameters and could promote the practical applications of terahertz technology in modulators, detectors, and sensors.
24 June 2019 in Journal of Aquatic Food Product Technology
Half-smooth tongue sole is a popular warm-water fish, and its skin may be an available resource for gelatin extraction. Response surface method was used to optimize the extraction of gelatin from the fish skin. The most suitable conditions for maximum gelatin yield (24.2%) were pretreatment with 1.9 g/L NaOH, followed by hot water extraction at 63.54ºC for 4.81 h. The obtained gelatin had a high imino acid content (185 residues/1,000 residues), with a high content of crude protein and low levels of ash, fat, and moisture. The predominant sodium dodecyl sulfate–polyacrylamide gel electrophoresis bands revealed that the gelatin contained low-molecular-weight peptides, α-, β-, and γ chains. As compared with bovine gelatin, the fish skin gelatin solution had lower values of strength and clarity and higher levels of L* and viscosity. Additionally, Fourier-transform infrared spectra showed that gel from the gelatin had four amide bands (amide A, amide I, amide II, and amide III) similar to commercial gelatin. The results suggest that half-smooth tongue sole skin could be a promising source of gelatin in view of the comparability between its gelatin and commercial gelatin in physicochemical properties.
27 February 2024 in IEEE Transactions on Intelligent Vehicles
Lane detection plays an important role in the autonomous driving system and attracts widespread interest in recent years. Despite the advantages of conventional work, such as segmentation-based and point-based methods, these models either practically require a large sum of anchors or only leverage the connection message of discrete points in the lane. Different from this, curve-based methods enable one to naturally learn the holistic representation of lanes based on the geometric semantics of curves and conduct end-to-end optimization conveniently, thus serving a promising direction. However, the existing curve-based methods encounter draws in: 1) modeling some complicated curves mathematically. 2) Simultaneously capturing geometric semantics within and between lane curves. 3) The endpoints of lane lines are susceptible to occlusion, a factor that is crucial for curve modeling. To tackle these issues, we revisit the curve-based methods and propose a novel model D ynamic NUR B S Net work ( DBNet ). Specifically, we introduce the NURBS curve to model lanes, enabling to theoretically fit various complicated curves and guarantee the robustness of local and global optimization. Based on this, we introduce three key modules to address lane detection challenges. Firstly, we propose Local Dynamic-Interaction (LDI) that adaptively exploits the geometric message of local at the feature level. Secondly, a Curve Fitting Enhancement (CFE) module to enhance the feature of both ends of the lane instance. Lastly, a Global Association-Sharing (GAS) module captures the global features of lanes, which can together promote semantic association and tackle the occlusion problem inside and outside the lane. Moreover, the proposed method achieves a new state-of-the-art performance on three public benchmarks and especially achieves 77.98% of the F1 score on the curve scenario in the CULane dataset.
19 August 2020 in Signal, Image and Video Processing
Infrared ship detection is crucial for maritime surveillance, but its performance is limited by complex sea-air backgrounds, resulting in low detection accuracy. To address this challenge while maintaining computational efficiency, this letter proposes IRS-DETR, an efficient infrared ship detection transformer. We first design an efficient feature aggregation (EFA) module for each stage of the backbone, which enhances feature extraction by modeling long-range dependencies with partial channel self-attention. To preserve fine-grained details during sampling, we introduce Haar-based wavelet sampling (HWS), implemented as wavelet upsampling and downsampling modules, to effectively retain both spatial and high-frequency information of small targets. Furthermore, we design a multi-kernel perception fusion (MKPFusion) module that fuses multi-level features using cascaded depthwise convolutions to improve cross-scale representation. Experiments on the ISDD dataset show that IRS-DETR achieves 92.5% precision and 91.7% AP50 with a 36.3% reduction in parameter count, demonstrating superior detection accuracy and efficiency. Our code is available at: https://github.com/Andrew-Dylan/IRS-DETR.
Due to the unique physiological structure of human lung tissue, segmentation of the lung parenchymal regions is a very challenging task. Traditional image segmentation methods have certain limitations on practical applications. Therefore, lung tissue segmentation methods based on deep learning have become a research hotspot in recent years. Res BCDU-Net may overcome the problem of high false positives in other semi-automatic segmentation, but it still has the problem of low accuracy in edge segmentation, which is probably caused by the unclear input of a single CT image. Therefore, we propose to utilize three consecutive CT images as the input, which employs inter-slice context to restrain the false positive. When a single input CT image is not clear, the accuracy of lung segmentation results can be improved by referring to its previous and next slices. Based on the input of three continuous images, the spatial information in the process of lung segmentation is added in this paper. We build a Res BCDU-SCB network and collect and integrate spatial information through SC-BLSTM module. An SC-attention module is designed to take both finer-grained spatial information and rich semantic information into account. In this paper, we append BLSTM (Bidirectional Convolutional Long Short-term Memory) module with SC-attention module, named SC-BLSTM, to decrease performance degradation caused by ambiguous boundaries and variable lung parenchymal shapes. The results of extensive experiments on lung CT images (LIDC-IDRI database) show that it may improve the final segmentation accuracy and reduce the false positives, which confirms the effectiveness of our proposed method.