This work aims to clarify the origin of hole conduction in undoped and Mg-doped CuCrO 2 oxide in order to have the possibility of controlling it by corresponding growth parameters. A chemical spray pyrolysis procedure for the deposition of p-type semiconductor thin films is described. The as-deposited films were amorphous. The formation of highly crystalline CuCrO 2 and Mg-doped CuCrO 2 films with a single phase delafossite structure was realized by annealing between 600 °C and 960 °C in a nitrogen atmosphere. The carrier concentration and the point defects of the samples are calculated by using the developed Kroger method of quasi-chemical reactions. p-type conductivity was predicted and observed in the undoped and Mg doped CuCrO 2 sample, and with n ~ 10 18 cm −3 carrier concentrations for 4%Mg doping. The electrical resistivity for a 4% Mg doped sample was 1.4 Ω·cm with a Seebeck coefficient of +130 μ V K −1 at 40 °C. By electroparamagnetic resonance spectroscopy Cr 3+ and Cu 2+ related defects were studied.
The electrical, optical, and magnetic properties of pure, 1%Fe, and 1%Ni doped ZnO thin films grown by spray pyrolysis technique were studied. All samples are transparent (T ≈ 85%) in VIS and near infrared region of wavelength. Ni and Fe doped ZnO layers are paramagnetic. Resistivity versus temperature has semiconducting behavior. Large value of magnetoresistance at 300 K at 1.3 T: MR = 56%/T for 1%Fe doped ZnO and MR = 28%/T for 1%Ni doped samples have been observed. These exceptional values of MR at room temperature originate probably from hopping conductivity in polycrystalline diluted magnetic semiconductor in paramagnetic high dilution limit.