Chunhwan Lee

Prof. Dr. Chunhwan Lee

department of smart mobility, Chonnam National University, Gwangju, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2014 in Energy Procedia
Verified
Journal Article
Open access
BCByungchul Choi
Byungchul Choi
YKYoung Kwon Kim
Young Kwon Kim
GJGilsung Jung
Gilsung Jung
Chunhwan LeeChunhwan Lee
Chunhwan Lee
XJXiaolong Jiang
Xiaolong Jiang
ICInchul Choi
Inchul Choi
The objectives of this study are to investigate the effect of diesel fuel blend with biobutanol on the emission of turbocharged CRDI(common rail direct injection) diesel engine. The blends considered here were blends of diesel fuels with 10 and 20% (by vol.) n-butanol. Engine performance and emission characteristics were measured by the ESC(European Stationary Cycle) test. Emissions of HCs, CO, NOx, HCHO, HCOOH and NH3 were measured by the FTIR. Size and number distribution of particulate matter were measured by the SMPS. From the results, for the n-butanol blend, NOx emission increased compared with the neat diesel fuel case. At the case of 20% butanol, both THC and CO emissions increased significantly, and both HCHO and HCOOH increased modestly in the low loading of ESC 7, 9, 11 and 13 mode comapring with the neat diesel fuel case. While n-butanol blending with diesel fuel reduced the mass of PM by 50∼73%, it emitted ultrafine particles (Dp<200nm) slightly more

29 January 2025 in Sensors
Verified
Journal Article
Open access
PDF file
SLSoomin Lee
Soomin Lee
Chunhwan LeeChunhwan Lee
Chunhwan Lee
CMChulwoo Moon
Chulwoo Moon
This study introduces a motion-sickness-reducing control strategy aimed at enhancing ride comfort in Electric Autonomous Vehicles (EAVs). For lateral control, the forward look-ahead distance was adaptively adjusted based on the Motion Sickness Dose Value (MSDV) analysis from ISO 2631-1, effectively mitigating lateral acceleration and its motion-sickness-related frequency components, leading to a reduced MSDV. For longitudinal control, Linear Quadratic Regulator (LQR) optimal control was applied to minimize acceleration, complemented by a band-stop filter specifically designed to attenuate motion-sickness-inducing frequencies in the acceleration input. The bandwidth of the band-stop filter used in this study was designed based on the motion-sickness frequency weighting specified in ISO 2631-1. The simulation results of the proposed control indicate a significant reduction in MSDV, decreasing from 16.3 to 10.46, achieving up to a 35.8% improvement compared to comparative control methods. While the average lateral position error was slightly higher than that of the comparative controller, the vehicle consistently maintained lane adherence throughout path-following tasks. These findings underscore the potential of the proposed method to simultaneously mitigate motion sickness and achieve a robust path-following performance in autonomous vehicles.

2 July 2024 in Sensors
Verified
Journal Article
Open access
PDF file
MKMinyoung KIM
Minyoung KIM
Chunhwan LeeChunhwan Lee
Chunhwan Lee
The diversification of mobility into services such as smart stores and conference rooms has accelerated the development of purpose-built vehicles (PBVs)—vehicles designed for specific purposes that utilize an extended electric vehicle chassis and autonomous driving technology. Despite the standards on speed bump dimensions stipulated by the National Land Transportation Act of the Republic of Korea, real-world speed bumps feature varying widths and heights that deviate from these standards. In this study, a velocity equation was derived via regression analysis to achieve the desired dynamic characteristics for a PBV passing over speed bumps with varying shapes through two types of semi-active suspension control: proportional–integral–differential (PID) and linear–quadratic–regulator (LQR). For a cargo-transport PBV, the PID and LQR controllers increased the velocity by 23.74% and 50.74%, respectively, under different speed bump widths and by 19.44% and 38.31%, respectively, under different speed bump heights. Moreover, an analysis of the vibration dose value (VDV), an indicator of ride comfort, revealed that the VDVs calculated using the velocity equation were within an acceptable error range of 10% above the target VDV. These findings provide insights into the speed control required for different types of autonomous PBVs to ensure ride comfort, as well as minimize the driving duration, depending on the specific purpose of the vehicle.

30 November 2023 in Transaction of the Korean Society of Automotive Engineers
Verified
Journal Article
Open access
MKMinyoung Kim
Minyoung Kim
Chunhwan LeeChunhwan Lee
Chunhwan Lee

28 February 2023 in Transactions of the Korean hydrogen and new energy society
Verified
Journal Article
Closed access
Chunhwan LeeChunhwan Lee
Chunhwan Lee
MKMinyoung Kim
Minyoung Kim
SLSumin Lee
Sumin Lee