Muhammad Abdul Basit

Dr. Muhammad Abdul Basit

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 November 2019 in IEEE Access
Verified
Journal Article
Open access
HNHaq Nawaz
Haq Nawaz
ANAhmad Umar Niazi
Ahmad Umar Niazi
MBMuhammad Abdul Basit
Muhammad Abdul Basit
MUMuhammad Usman
Muhammad Usman
This paper presents a unidirectional, left handed circularly polarized (LHCP), single layered antenna array with improved interport isolation for simultaneous transmit and receive (STAR) or in-band full duplex (IBFD) wireless applications. The proposed IBFD antenna is comprised of three identical and sequentially rotated LHCP radiating elements where two Rx patches are symmetrically placed with respect to a single Tx patch. The symmetry of proposed antenna structure results in same amount of coupling or self interference (SI) from Tx element and differentially driven Rx patches achieve effective suppression of resulting SI to obtain improved Tx-Rx interport isolation required for STAR applications. The deployed feed network for differential-driven Rx operation is composed of a simple 3dB/180o rat-race coupler (ring hybrid coupler) with nice in-band amplitude and out-of-phase balance characteristics. The implemented single layer, compact (antenna elements and feeding network etched on single-layered PCB) antenna array achieves 10dB return-loss bandwidth. 75MHz for both Tx and Rx ports. The prototype achieves. 47dB interport isolation in 75MHz bandwidth and 3 dB axial ratio beam-width is 60o for implemented antenna.

11 July 2024 in Electronics
Verified
Journal Article
Open access
PDF file
TLTong Li
Tong Li
JGJin-Wei Gao
Jin-Wei Gao
Nouman RasoolNouman Rasool
Nouman Rasool
MBMuhammad Abdul Basit
Muhammad Abdul Basit
CCChen Chen
Chen Chen
A dual-band, dual-mode button antenna is proposed for emerging fifth-generation (5G) networks and Industrial, Scientific, and Medical (ISM) communication systems, as it operates at 3.5 GHz and 5.8 GHz, respectively. At the lower band, a monopole-like omnidirectional radiation pattern is achieved by loading shorting pins on curved strips for on-body communication. At the higher band, broadside circularly polarized radiation is achieved by loading an asymmetric U-shaped slot in the central chamferd patch for off-body communication. By using Characteristic Modal Analysis (CMA), a clear physical insight into the formation of dual polarization is provided. The −10 dB impedance bandwidth ranges from 3.48 to 3.60 GHz and 5.65 to 6.03 GHz, respectively. The 3 dB axial ratio (AR) bandwidth ranges from 5.71 to 5.85 GHz in the high band. Additionally, the antenna achieves a peak gain of 1.2 dBi in on-body mode and 6.9 dBi in off-body mode. The maximum specific absorption rate (SAR) calculated on the body tissues is below the US/EU standard thresholds of 1.6 W/kg and 2 W/kg. The measured results indicate that the antenna experiences only slight impact from human body loading and structural deformations. Given its notable features, the proposed design is well suited for Wireless Body Area Network (WBAN) applications.

7 March 2012 in The Nucleus
Verified
Journal Article
Open access
PDF file
MBMuhammad Abdul Basit
Muhammad Abdul Basit
GRG. Raja
G. Raja
Medical images require lossless compression as a small error due to lossy compression may be considered as a diagnostic error. JPEG XR is the latest image compression standard designed for variety of applications and has a support for lossy and lossless modes. This paper provides in-depth performance evaluation of latest JPEGXR with existing image coding standards for medical images using lossless compression. Various medical images are used for evaluation and ten images of each organ are tested. Performance of JPEGXR is compared with JPEG2000 and JPEGLS using mean square error, peak signal to noise ratio, mean absolute error and structural similarity index. JPEGXR shows improvement of 20.73 dB and 5.98 dB over JPEGLS and JPEG2000 respectively for various test images used in experimentation.

1 January 2026 in International Journal of RF and Microwave Computer-Aided Engineering
Verified
Journal Article
Open access
SKSyeda Shafaq Karim
Syeda Shafaq Karim
MBMuhammad Abdul Basit
Muhammad Abdul Basit
This letter presents the design of a compact integrated antenna operating across both FR1 and FR2 frequency ranges for 5G applications. The proposed structure, with overall dimensions of 0.58 λ G × 0.66 λ G × 0.01 λ G , employs a common aperture shared by a slot antenna and a patch antenna. In the microwave band, the slot‐based radiator exhibits a bidirectional radiation pattern, which is well suited for wide‐area and orientation‐independent connectivity in 5G IoT and sub‐6 GHz communications. At millimeter wave frequencies, the patch radiator generates a broadside radiation pattern with moderate gain, enabling high‐data‐rate directional links such as device‐to‐device communication and vehicular communications. The proposed dual‐band antenna achieves peak gains of 5.6 dBi in the microwave band and approximately 10.2 dBi in the millimeter wave band. The antenna provides wide fractional impedance bandwidths of 74% (3.3–7.2 GHz) and 23.8% (24–30.5 GHz), effectively covering several key 5G bands. Owing to its novel integrated structure, an isolation better than 30 dB is achieved in both bands. Furthermore, frequency‐dependent beam scanning is observed in both operating bands. A prototype was fabricated, and the measured results show close agreement with simulations.

1 April 2026 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
SSSajid Saeed
Sajid Saeed
MBMuhammad Abdul Basit
Muhammad Abdul Basit
This paper introduces a coplanar waveguide (CPW)-fed folded slot antenna designed for 5G millimeter-wave applications. The antenna features a single folded slot arranged in a 2x2 MIMO configuration to support high data rates. By utilizing a CPW feed and slot antenna design, the structure remains simple and requires only top-layer metallization. The antenna is well-suited for space-constrained applications due to its compact dimensions of 14 mm x 14 mm x 0.2 mm. Simulation results show that the antenna operates around 24 GHz with good radiation performance while maintaining meeting the return loss and inter-port isolation requirements.