When planning a solar energy conversion system, having sufficiently reliable values of the monthly average daily solar radiation (MADSR) on a horizontal surface is essential. Traditionally, estimates based on other climatological variables for which more information is available have been relied upon to compensate for the lack of direct solar radiation measurements. Solar radiation varies widely, which requires the creation of site-specific forecast models. By using artificial neural network (ANN) models or similar methods using historical datasets, the monthly average daily solar radiation can be easily assessed. To verify the validity of the established ANN model, a series of analyses was performed using the mean squared error, the coefficient of determination (R²), and the mean absolute error. The study used a dataset collected from nine weather stations in Saudi Arabia from 1985 to 2000. The input parameters for the ANN model were the maximum air relative humidity, latitude, the maximum ambient air temperature, longitude, the minimum ambient air temperature, the minimum air relative humidity, sunshine duration, location altitude, and the corresponding month. The R² for the whole test dataset was 0.8449. Furthermore, a sensitivity analysis using the established ANN model showed that site elevation (location altitude) had the most significant effect on MADSR on a horizontal surface, with a contribution value of 14.66%. The analysis results show that the ANN model accurately estimates MADSR on horizontal surfaces regardless of seasonal variations in weather conditions. Furthermore, this work is important not only for its contribution to the shape of information in solar radiation forecasting but also for establishing the practical application of ANNs in renewable energy management. The results of this work will help improve the utilization of solar energy and support sustainable energy efforts. Furthermore, the proposed ANN model is believed to be useful for predicting MADSR on horizontal surfaces in other locations in Saudi Arabia with similar climatic conditions to the study sites. Furthermore, the ANN approach may be functional to the basic strategy of a solar arrangement and is suitable for forecasting other meteorological data.

Research on the quality of the air in rural areas is essential for determining base emissions of air pollutants, evaluating the effects of dust pollutants particular to rural areas, modeling the dispersion of pollutants, and developing appropriate pollution mitigation systems. The absence of a systematic review based on the assessment of air quality levels in agricultural settings based on integrated weather variables and air pollutants in the literature draws attention to the deficiencies and the necessity of further research in this area. Hence, our study aimed to develop an Arduino monitoring system with related sensors to acquire some air pollutants and weather parameters. Additionally, we proposed an innovative solution to compare air quality levels by suggesting a new criterion called an integrated indicator for air quality assessment (IAQA). It was created based on the weighted average method to combine the investigated air pollutants and weather parameters. This criterion was evaluated while conducting field measurements in 29 environmentally different agricultural regions located within the Kingdom of Saudi Arabia. To determine the integrated indicator, all the values of the variables were normalized between 0 and 1. The agricultural setting with the lowest integrated indicator was the best environmentally. The lowest and highest values of the integrated indicator ranged from 37.03% and 66.32%, respectively, with an arithmetic average of 48.24%. The developed criterion can change its value depending on the change in the weight value of the variables involved, and it is suitable for application to any other agricultural or non-agricultural setting to evaluate the pollution level in the air. Although similar research has been published, this paper presents novelty findings based on integrated values of air pollutants and weather variables for defining a new criterion called IAQA. Additionally, this paper presents original results for air pollutants and weather aspects in different agricultural settings.

For every tractor test carried out on a concrete road under defined conditions, the Nebraska Tractor Test Laboratory (NTTL) provides values of the specific volumetric fuel efficiency (SVFE) in unit of kWh/L). Because soil tillage is a highly energy-intensive process and the energy consumption of tillage operations is a significant component of a farm budget, there is a growing amount of attention being given to the examination of the SVFE for tillage operations. Nonetheless, the study of the tillage process and a scientific approach to the tillage process are becoming more and more dependent on scientific modeling. Therefore, in this study based on real-tillage field operation, an artificial neural network (ANN) model was built to predict SVFE. This study aimed to confirm that the ANN model could incorporate 10 inputs for prediction: initial soil moisture content, draft force, initial soil bulk density, sand, silt, and clay proportions in the soil tractor power, plow width, tillage depth, and tillage speed. The Qnet v2000, as an ANN simulation software, was employed for the simulation of the SVFE. In this regard, 20,000 runs of Qnet v2000 were completed for the training and testing stages. The anticipated results displayed that the determination coefficient (R²) was larger than 0.96; using the training dataset, R² was 0.982 and using the testing dataset, R² was 0.9741, indicating that the recognition of a full ANN model makes it likely to reply to essential enquiries that were previously unanswerable regarding the impact of working and soil conditions on the SVFE of a tractor–tillage implement system. Additionally, sensitivity analyses were completed to specify which modeled parameters were more sensitive to the factors using the obtained ANN model. According to the sensitivity analysis, SVFE was more affected by changes in the tillage speed (21.07%), silt content in the soil (15.56%), draft force (11.01%), and clay content in the soil (10.86%). Predicting SVFE can lead to more appropriate decisions on tractor–chisel plow combination management. Therefore, it is highly advisable to use the newly created ANN model to appropriately manage SVFE to reduce tractor–tillage implement energy dissipation. Additionally, suitable management of some variables, for example, tillage depth, tillage speed, and soil moisture content, can help enhance fuel consumption in the tractor–tillage implementation system.

Predicting tractor performance factors accurately is crucial for enhancing energy efficiency and assisting with the choice of machinery in agricultural operations. Using the Nebraska Tractor Test Laboratory (NTTL) identical data, this study uses artificial neural network (ANN) modeling to forecast important performance metrics of a front wheel assist (FWA) Massey Ferguson tractor. A feed-forward ANN model was developed and validated using reported data from official tractor tests. Performance indicators, such as drawbar pull (kN), drawbar power (kW), hourly fuel consumption rate (kg/h), drawbar specific fuel consumption (kg/kW·h), and drawbar specific volumetric fuel efficiency (kW/kg·h), were utilized as outputs and certain operational factors, the tractor characteristics variables as well as other variables were used as inputs. Statistical measures, including the coefficient of determination and error metrics from training and testing datasets, were used to assess the model’s performance. The results showed that the ANN model produced excellent generalization capabilities and good prediction performance by correctly capturing the nonlinear correlations between inputs and tractor performance indicators. The suggested strategy performed better than traditional regression-based techniques documented in the literature, especially when operation variables and tractor characteristics varied. The results show that combining NTTL data with ANN techniques offers a dependable and affordable method for predicting tractor performance indicators and evaluating energy efficiency. This eliminates the need for extensive experimental procedures and promotes data-driven decision-making in agricultural machinery management.

Air pollution is a growing concern in rural areas where agricultural production can be reduced by it. This article analyses data obtained as part of a research project. The aim of this study is to understand the influence of atmospheric pressure, air temperature, air relative humidity, longitude and latitude of the location, and indoor and outdoor environment on local rural workplace diversity of air pollutants such as carbon monoxide (CO) and suspended particulate matter (SPM), as well as the contribution of these variables to changes in such air pollutants. The focus is on four topics: motivation, innovation and creativity, leadership, and social responsibility. Furthermore, this study developed an artificial neural network (ANN) model to predict CO and SPM concentrations in the air based on data collected from the mentioned inputs. The related sensors were assembled on an Arduino Mega 2560 board to form a field-portable device to detect air pollutants and meteorological parameters. The sensors included an MQ7 sensor for CO concentration measurement, a Sharp GP2Y1010AU0F dust sensor for SPM concentration measurement, a DHT11 sensor for air temperature and air relative humidity measurement, and a BMP180 sensor for air pressure measurements. The longitude and latitude of the location were measured using a smartphone. Measurements were conducted from 20 December 2021 to 16 July 2022. Results showed that the overall average outdoor CO and SPM concentrations were 10.97 ppm and 231.14 μg/m³ air, respectively. The overall average indoor concentrations were 12.21 ppm and 233.91 μg/m³ air for CO and SPM, respectively. Results showed that the ANN model demonstrated acceptable performance in predicting CO and SPM in both the training and testing phases, exhibiting a coefficient of determination (R²) of 0.575, a root mean square error (RMSE) of 1.490 ppm, and a mean absolute error (MAE) of 0.994 ppm for CO concentrations when applying the testing dataset. For SPM concentrations, the R², RMSE, and MAE using the test dataset were 0.497, 30.301 μg/m³ air, and 23.889 μg/m³ air, respectively. The most influential input variable was air pressure, with contribution rates of 22.88% and 22.82% in predicting CO and SPM concentrations, respectively. The acceptable performance of the developed ANN model provides potential advances in air quality management and agricultural planning, enabling a more accurate and informed decision-making process regarding air pollution. The results of short-term estimation of CO and SPM concentrations suggest that the accuracy of the ANN model needs to be improved through more comprehensive data collection or advanced machine learning algorithms to improve the prediction results of these two air pollutants. Moreover, as even lower cost devices can predict CO and SPM concentrations, this study could lead to the development some kind of virtual sensor, as other air pollutants can be estimated from measurements of particulate matters.