The FLUKA Monte Carlo code has recently undergone significant enhancements, driven by needs from its user community. Key improvements are discussed, such as a new point-wise treatment for the interactions of low-energy neutrons, the incorporation of a new model for nuclear elastic scattering of protons below 250 MeV, explicit generation of synchrotron radiation photons during charged particle tracking, a revised modeling approach for coherent effects in bent crystals, and the addition of arc-DPA scoring. While improving and extending FLUKA physics performance is essential, it is equally important to ensure the long-term maintainability of the codebase. This paper also outlines the strategy and substantial progress in evolving FLUKA to meet this objective. The FLUKA features are being translated into a new codebase, fulfilling essential criteria such as continuity in the user experience and compatibility with existing inputs, thus laying the foundation for a new FLUKA generation. The codebase makes use of the Geant4 toolkit when appropriate. Additionally, the enhanced collaboration with Geant4 has resulted in the development of an interface, detailed in this paper, that enables access to the FLUKA hadronic models from any Geant4 application.

The Super Proton Synchrotron (SPS) is the second largest accelerator at CERN where protons are accelerated between 16 GeV/c and 450 GeV/c. Beam losses, leading to the mixed-field radiation of up to MGy magnitude, pose a threat to the reliability of the electronic equipment and polymer materials located in the tunnel and its vicinity. Particularly in the arc sectors, where both main magnets and radiation sensors are periodically arranged, the Total Ionizing Dose (TID) is of concern for the front-end electronics of A Logarithmic Position System (ALPS). The SPS is equipped with multiple radiation detection systems such as Beam Loss Monitors (BLM), RadMons, and as of 2021, the Distributed Optical Fibre Radiation Sensing (DOFRS), that combined all together provide a very comprehensive picture of both the TID spatial distribution and its time evolution. Within this study, the overview of measured 2021 and 2022 TID levels is presented, together with the demonstration of capabilities offered by the different radiation monitors. The DOFRS, supported by the passive Radio-Photo Luminescence (RPL) dosimeter measurements, is used to assess the TID values directly at the electronic racks, which turned out to be reaching several tens of Gy per year, potentially affecting the ALPS lifetime.

This study introduces numerical advancements in an alternative design for the Super Proton Synchrotron (SPS) Beam Dump Facility (BDF) at the European Laboratory for Particle Physics (CERN). The design envisions a high-power operation target made of flowing liquid lead. The proposed BDF is a versatile facility for both beam-dump-like and fixed-target experiments. The target behavior is studied, assuming a proton beam with a momentum of 400 GeV/c, a pulse frequency of 1/7.2 Hz, and an average beam power of 355 kW. Using various Computational Fluid Dynamics (CFD) codes, we evaluate the behavior of liquid lead and predict the thermal stress on the target vessel induced by the pulsed heat source generated by the charged particle beam. The comparison increases the reliability of the results, investigating the dependencies on the CFD modeling approach. The beam is a volumetric heat source with data from the beam-lead interaction simulations provided by the European Laboratory for Particle Physics and obtained with a Monte Carlo code. Velocity field and stress profiles can enhance the design of the lead loop and verify its viability and safety when operated with a liquid metal target.

Relying on atomic scattering factors from evaluated databases, a new model for the reflectivity of x rays on solid surfaces has been developed for FLUKA v4-6.0. This model accounts for the variation of reflectivity as a function of the photon energy, its incidence angle, and linear polarisation; surface roughness effects are also taken into account. FLUKA reflectivities agree well with those obtained from state-of-the-art codes used for the characterization of optical devices, both for homogeneous solids and for multilayer mirrors. This new capability renders FLUKA a nearly one-stop shop for synchrotron radiation simulations: emission from bending magnets and wigglers, photon transport and interaction, electromagnetic (and hadronic when applicable) shower development in complex geometries, as well as x-ray reflection at designated solid surfaces can now be all accounted for in a single FLUKA run. This streamlined FLUKA simulation workflow greatly simplifies the plethora of simulation tools that Monte Carlo practitioners previously needed to rely on. Two application scenarios of this new reflectivity model are showcased: first, the use of a multilayer mirror to deflect x rays from an optical hutch onto an experimental hall at the MINERVA beamline of the ALBA synchrotron and, second, the assessment of the photon flux near the interaction point at the CERN's Future Circular Collider (in its electron-positron stage) as a result of upstream x-ray reflections.

Relying on atomic-scattering factors from evaluated databases, a new model for the reflectivity of x-rays on solid surfaces has been developed for FLUKA v4-6.0. This model accounts for the variation of reflectivity as a function of the photon energy, its incidence angle, and linear polarization; surface-roughness effects are also taken into account. FLUKA reflectivities agree well with those obtained from state-of-the-art codes used for the characterization of optical devices, both for homogeneous solids and for multilayer mirrors. This new capability renders FLUKA a nearly one-stop shop for synchrotron radiation simulations: emission from bending magnets and wigglers, photon transport and interaction, electromagnetic (and hadronic when applicable) shower development in complex geometries, as well as x-ray reflection at designated solid surfaces, can now all be accounted for in a single FLUKA run. This streamlined FLUKA simulation workflow greatly simplifies the plethora of simulation tools that Monte Carlo practitioners previously needed to rely on. Two application scenarios of this new reflectivity model are showcased: first, the use of a multilayer mirror to deflect x-rays from an optical hutch onto an experimental hall at the MINERVA beamline of the ALBA synchrotron and second, the assessment of the photon flux near the interaction point at CERN’s Future Circular Collider (in its electron-positron stage) as a result of upstream x-ray reflections.

This study introduces numerical advancements in an alternative design for the SPS Beam Dump Facility (BDF) at CERN. The design envisions a high-power operation target made of flowing liquid lead. The BDF is a proposed versatile facility at CERN, intended for both beam-dump-like and fixed-target experiments. The target behavior is assessed, assuming a proton beam with a momentum of 400 GeV/c, a pulse frequency of 1/7.2 Hz, and an average beam power of 355 kW. An evaluation is conducted using various Computational Fluid Dynamics (CFD) codes to analyze the behavior of liquid lead and to predict the thermal stress on the target vessel induced by the pulsed heat source generated by the charged particle beam. The comparison increases the reliability of the results, investigating the dependencies on the CFD modeling approach. The beam is modeled as a volumetric heat source with data coming from beam-lead interaction simulations provided by CERN and obtained with the Monte-Carlo code FLUKA. The velocity field and stress profiles are utilized to enhance the design of the lead loop and verify its viability and safety when operated with a liquid metal target.