Moisture content and particle size are critical parameters in fluidized-bed granulation and coating. In this study, microcrystalline cellulose was granulated and coated. The particle size was monitored in real time by a Parsum IPP70 probe. The fluidization regime was assessed by Gaussian spectral analysis. The bed temperature and gas humidity profile were monitored to evaluate the drying efficiency. The defluidization phase was detected in the early stages with frequencies below 6.0 Hz. The Parsum probe showed the growth of the particles due to agglomeration. The psychometric parameters indicated the lower potential energy for drying. Therefore, monitoring in real time is important to detect failures.

A hybrid numerical–analytical solution based on the generalized integral transform technique is proposed to handle the two‐dimensional Navier–Stokes equations in cylindrical coordinates, expressed in terms of the streamfunction‐only formulation. The proposed methodology is illustrated in solving steady‐state incompressible laminar flow of Newtonian fluids in the developing region of a circular tube. The flow modeling also considers two limiting inlet conditions, namely, uniform velocity profile representing a parallel flow, and zero vorticity that characterizes irrotational inlet flow. The integral transform analysis for such a full cylindrical region brings up singularities at the channel centerline, and, as previously described in a work dealing with the boundary‐layer formulation, a way to alleviate this difficulty is to adopt a recently introduced fourth‐order eigenvalue problem as the basis for the eigenfunction expansion. A thorough convergence analysis of the proposed expansion is then undertaken, for different values of Reynolds number, and a set of reference results for the velocity distributions and friction factors are then presented in tabular and graphical forms. Copyright © 2009 John Wiley & Sons, Ltd.