Transmission line corridor (i.e., Right-of-Ways (ROW)) clearance management plays a critically important role in power line risk management and is an important task of the routine power line inspection of the grid company. The clearance anomaly detection measures the distance between the power lines and the surrounding non-power-facility objects in the corridor such as trees, and buildings, to judge whether the clearance is within the safe range. To find the clearance hazards efficiently and flexibly, this study thus proposed an automatic clearance anomaly detection method utilizing LiDAR point clouds collected by unmanned aerial vehicle (UAV). Firstly, the terrain points were filtered out using two-step adaptive terrain filter and the pylons were detected in the non-terrain points following a feature map method. After dividing the ROW point clouds into spans based on the pylon detection results, the power line point clouds were extracted according to their geometric distribution in local span point clouds slices, and were further segmented into clusters by applying conditional Euclidean clustering with linear feature constraints. Secondly, the power line point clouds segments were iteratively fitted with 3D catenary curve model that is represented by a horizontal line and a vertical catenary curve defined by a hyperbolic cosine function, resulting in a continuous mathematical model of the discretely sampled points of the power line. Finally, a piecewise clearance calculation method which converts the point-to-catenary curve distance measurements to minimal distance calculation based on differential geometry was used to calculate the distance between the power line and the non-power-facility objects in the ROW. The clearance measurements were compared with the standard safe threshold to find the clearance anomalies in the ROWs. Multiple LiDAR point clouds datasets collected by a large-scale UAV power line inspection system were used to validate the effectiveness and accuracy of the proposed method. The detected results were validated through qualitatively visual inspection, quantitatively manual measurements in raw point clouds and on-site field survey. The experiments show that the automatic clearance anomaly detection method proposed in this paper effectively detects the clearance hazards such as tree encroachment, and the clearance measurement accuracy is decimeter level for the LiDAR point clouds collected by our UAV inspection system.

Traditional indoor laser scanning trolley/backpacks with multi-laser scanner, panorama cameras, and an inertial measurement unit (IMU) installed are a popular solution to the 3D indoor mapping problem. However, the cost of those mapping suits is quite expensive, and can hardly be replicated by consumer electronic components. The consumer RGB-Depth (RGB-D) camera (e.g., Kinect V2) is a low-cost option for gathering 3D point clouds. However, because of the narrow field of view (FOV), its collection efficiency and data coverages are lower than that of laser scanners. Additionally, the limited FOV leads to an increase of the scanning workload, data processing burden, and risk of visual odometry (VO)/simultaneous localization and mapping (SLAM) failure. To find an efficient and low-cost way to collect 3D point clouds data with auxiliary information (i.e., color) for indoor mapping, in this paper we present a prototype indoor mapping solution that is built upon the calibration of multiple RGB-D sensors to construct an array with large FOV. Three time-of-flight (ToF)-based Kinect V2 RGB-D cameras are mounted on a rig with different view directions in order to form a large field of view. The three RGB-D data streams are synchronized and gathered by the OpenKinect driver. The intrinsic calibration that involves the geometry and depth calibration of single RGB-D cameras are solved by homography-based method and ray correction followed by range biases correction based on pixel-wise spline line functions, respectively. The extrinsic calibration is achieved through a coarse-to-fine scheme that solves the initial exterior orientation parameters (EoPs) from sparse control markers and further refines the initial value by an iterative closest point (ICP) variant minimizing the distance between the RGB-D point clouds and the referenced laser point clouds. The effectiveness and accuracy of the proposed prototype and calibration method are evaluated by comparing the point clouds derived from the prototype with ground truth data collected by a terrestrial laser scanner (TLS). The overall analysis of the results shows that the proposed method achieves the seamless integration of multiple point clouds from three Kinect V2 cameras collected at 30 frames per second, resulting in low-cost, efficient, and high-coverage 3D color point cloud collection for indoor mapping applications.

Multi-Beam LiDAR (MBL) sensors sample the real-world with discrete 3D point clouds (PC) and have become a major and essential 3D sensing capability for autonomous robots. To ensure an accurate point sampling on surfaces, high-resolution MBL sensors (e.g., Ouster OS0-128) are commonly used to collect dense point clouds for robot tasks, including object detection and tracking, simultaneous localization and mapping (SLAM), in applications such as autonomous driving vehicles (ADVs). However, the high cost and large volume/weight/energy consumption of such sensors limit their usage in broader applications such as UAV/UGV swarms with small-scale agents with limited payload. Existing studies on Super-Resolution (SR) upsampling of the PC from low-resolution MBL have not considered the geometry semantics of the scenes, thus resulting in less optimal SR points for downstream subtasks (e.g., SLAM). Thus, this paper proposes SGSR-Net, a structure semantics-guided MBL Super-Resolution network. SGSR-Net takes the low-resolution range images of the MBL sensors as input and produces dense and structure-aware Super-Resolution point cloud from those sparse measurements through a vertical spatial and channel attention-enhanced CNN model coupling with guided Monte Carlo filtering, for indoor LiDAR-SLAM applications. The SGSR-Net is validated using datasets collected by a UGV equipped with multiple MBL sensors. The results demonstrate that the proposed CG-LSR (CASE Attention Guided Encoder-Decoder LiDAR Super-Resolution Network) reduces the MAE of the SR points by 12.4% down to 0.177 m when compared with the state-of-the-art (SOTA) method [1}, [2], [3], [4]. The indoor SLAM results with SR-points produced by SGSR-Net show that the mean and RMSE of the absolute pose error (APE) are decreased by 27% and 30%, down to 0.849 m and 0.902 m, respectively, which significantly improve the indoor-SLAM performance and stability of SOTA LiDAR-SLAM systems (i.e. LeGO-LOAM [5], [6], [7], [8]).

Ground Penetrating Radar (GPR) enables the non-invasive detection of various subsurface objects such as pipes, stones, etc. The location and size of the object in the medium could be obtained by fitting the generated hyperbolic signatures within the GPR B-scan and analyzing its parameters. In this paper, GPR-Former is proposed for automatic target detection and hyperbola fitting on GPR B-scan images. We have designed a transformer-based neural network to extract features to directly regress the parameters of hyperbolic signatures in the GPR B-scan data to detect targets beneath the ground automatically. A symmetry-constrained analytical solution for the hyperbolic parameters is proposed to refine the parameters derived from the transformer network, serving the extraction and analysis of buried objects in underground opaque spaces. Experiments are conducted on three datasets for the qualitative and quantitative validation of the GPR-Former, including ground-penetrating radar detection of submarine pipelines and land pipelines. Results show that the proposed method is able to automatically and efficiently extract hyperbolas from GPR B-scan images. True hyperbola-point precision (TP_Pre) and true hyperbola-point recall (TP_Rec) metrics are introduced to evaluate performances in parametric hyperbola extraction and fitting. The results show that the TP_Pre and TP_Rec of the proposed method reach 0.867, 0.402, 0.744 and 0.762, 0.736, 0.723, with an improvement of 6%, 22%, 4% compared with the state-of-the-art methods (C3 algorithm and migration learning-based method proposed by Yang), respectively.