To address the subjectivity of traditional factor attribute grading methods and the weak predictive capabilities of single-model classifications, this study focused on Yulong County; the Contribution Degree Clustering Method (CDCM) utilizes the Certainty Factor (CF) as the contribution index to partition continuous factor attribute intervals. Additionally, the Sparrow Search Optimization Algorithm (SSA) is employed for hyperparameter tuning. The CF is incorporated into Support Vector Machine (SVM), Back Propagation Neural Network (BPNN), and Random Forest (RF) models to form the CF-SSA-SVM, CF-SSA-BPNN, and CF-SSA-RF coupling models, respectively. These basic coupling models are further integrated using the Stacking algorithm to create the CF-SSA-Stacking integrated coupling model for constructing a landslide susceptibility assessment system. The results indicate that the CF-SSA-Stacking integrated coupling model achieves the highest accuracy, F1 score, Kappa coefficient, and AUC value, with values of 0.89375, 0.89172, 0.787500, and 0.9522, respectively. These metrics are significantly superior to those of the three basic coupling models, demonstrating better generalization capability and reliability. This suggests that the model can identify more historical landslide occurrences using fewer grid areas classified as extremely-high- or high-susceptibility zones. It is suitable as an effective regional landslide susceptibility assessment method for practical disaster prevention and mitigation applications. Further studies could explore the model’s performance across varying geological settings or with different datasets, providing a roadmap for future research and development in landslide susceptibility assessment.

Geohazards that have developed in densely vegetated alpine gorges exhibit characteristics such as remote occurrence, high concealment, and cascading effects. Utilizing a single remote sensing datum for their identification has limitations, while utilizing multiple remote sensing data obtained based on different sensors can allow comprehensive and accurate identification of geohazards in such areas. This study takes the Latudi River valley, a tributary of the Nujiang River in the Hengduan Mountains, as the research area, and comprehensively uses three techniques of remote sensing: unmanned aerial vehicle (UAV) Light Detection and Ranging (LiDAR), Small Baseline Subset interferometric synthetic aperture radar (SBAS-InSAR), and UAV optical remote sensing. These techniques are applied to comprehensively identify and analyze landslides, rockfalls, and debris flows in the valley. The results show that a total of 32 geohazards were identified, including 18 landslides, 8 rockfalls, and 6 debris flows. These hazards are distributed along the banks of the Latudi River, significantly influenced by rainfall and distribution of water systems, with deformation variables fluctuating with rainfall. The three types of geohazards cause cascading disasters, and exhibit different characteristics in the 0.5 m resolution hillshade map extracted from LiDAR data. UAV LiDAR has advantages in densely vegetated alpine gorges: after the selection of suitable filtering algorithms and parameters of the point cloud, it can obtain detailed terrain and geomorphological information on geohazards. The different remote sensing technologies used in this study can mutually confirm and complement each other, enhancing the capability to identify geohazards and their associated hazard cascades in densely vegetated alpine gorges, thereby providing valuable references for government departments in disaster prevention and reduction work.

Surface subsidence hazards in mining areas are common geological disasters involving issues such as vegetation degradation and ground collapse during the mining process, which also raise safety concerns. To address the accuracy issues of traditional prediction models and study methods for predicting subsidence in open-pit mining areas, this study first employed 91 scenes of Sentinel-1A ascending and descending orbits images to monitor long-term deformations of a phosphate mine in Anning City, Yunnan Province, southwestern China. It obtained annual average subsidence rates and cumulative surface deformation values for the study area. Subsequently, a two-dimensional deformation decomposition was conducted using a time-series registration interpolation method to determine the distribution of vertical and east–west deformations. Finally, three prediction models were employed: Back Propagation Neural Network (BPNN), BPNN optimized by Genetic Algorithm (GA-BP), and BPNN optimized by Artificial Bee Colony Algorithm (ABC-BP). These models were used to forecast six selected time series points. The results indicate that the BPNN model had Mean Absolute Errors (MAE) and Root Mean Squared Errors (RMSE) within 7.6 mm, while the GA-BP model errors were within 3.5 mm, and the ABC-BP model errors were within 3.7 mm. Both optimized models demonstrated significantly improved accuracy and good predictive capabilities.