Low-light imaging capabilities are in urgent demand in many fields, such as security surveillance, night-time autonomous driving, wilderness rescue, and environmental monitoring. The excellent performance of SPAD devices gives them significant potential for applications in low-light imaging. This article presents a 64 (rows) × 128 (columns) SPAD image sensor designed for low-light imaging. The chip utilizes a three-dimensional stacking architecture and microlens technology, combined with compact gated pixel circuits designed with thick-gate MOS transistors, which further enhance the SPAD’s photosensitivity. The configurable digital control circuit allows for the adjustment of exposure time, enabling the sensor to adapt to different lighting conditions. The chip exhibits very low dark noise levels, with an average DCR of 41.5 cps at 2.4 V excess bias voltage. Additionally, it employs a denoising algorithm specifically developed for the SPAD image sensor, achieving two-dimensional grayscale imaging under 6 × 10−4 lux illumination conditions, demonstrating excellent low-light imaging capabilities. The chip designed in this paper fully leverages the performance advantages of SPAD image sensors and holds promise for applications in various fields requiring low-light imaging capabilities.
10 April 2024 in IEEE Journal of Solid-State Circuits
This article presents a 3 THz CMOS image sensor (Tera-CIS). The sensor has a column-parallel readout (CPRO) architecture that integrates an antenna-coupled pixel array and CPRO circuit chains on a monolithic chip. The proposed compact two-transistor (2T) pixel adopts a step-covered patch antenna and a defected ground structure (DGS) to obtain sufficient sensitivity and bandwidth. The step-covered patch antenna model is developed to predict pixel performances precisely. The DGS structure suppresses mutual coupling among adjacent pixels and shrinks the pixel pitch. In the CPRO circuit chain, chopping and oversampling techniques are employed to reduce noise and flexibly balance the dynamic range (DR) characteristics with the imaging rate. A digital decimation filter (DDF) with a time-multiplexing fashion is adopted to alleviate resource pressure. A 16.4k-pixel Tera-CIS was fabricated with a standard $0.18~\mu \text{m}$ CMOS process. A 3 THz imaging platform with four different continuous-wave (CW) terahertz quantum cascade lasers was established. The pixel sensitivity was 753 V/W at 3.4 THz, with a measured detection bandwidth of 0.78 THz (from 3.08 to 3.86 THz). The DR in the voltage domain of the sensor reached 73 dB at 8 fps while the maximum DR in the power domain was 39.8 dB. Meanwhile, the sensor can operate up to 130 fps. The imaging system can achieve high-resolution imaging and clearly identify concealed objects.