Tissue engineering, a rapidly advancing field in medicine, has made significant strides with the development of artificial tissue substitutes to meet the growing need for organ transplants. Three-dimensional (3D) porous scaffolds are widely utilized in tissue engineering, especially in orthopedic surgery. This study investigated the fluidic properties of diamond and gyroid structures with varying porosity levels (50–80%) using Computational Fluid Dynamics (CFD) analysis. The pressure and velocity distributions were analyzed, and it was observed that the pressure decreased gradually, whereas the velocity increased in the central area of the surface structures. Specifically, the pressure drop ranged from 2.079 to 0.984 Pa for the diamond structure and from 1.669 to 0.943 Pa for the gyroid structure as the porosity increased from 50% to 80%. It was also found that the permeability increased as the porosity level increased, with values ranging from to for the diamond structure and from to for the gyroid structure. The wall shear stress (WSS) was also analyzed, showing a consistent decrease with increased porosity for both types of structures, with WSS values ranging from to for the diamond structure and from to for the gyroid structure. Overall, this study provides insights into the fluidic properties of diamond and gyroid structures, which can be useful in various applications such as tissue engineering.
Buildings are a significant contributor to global energy consumption and greenhouse gas emissions, making their efficient management critical for achieving sustainability goals. This review aims to provide a comprehensive synthesis of recent advancements in building energy management, with a focus on emerging technologies, renewable energy integration, energy storage, simulation-based optimization and life-cycle costing (LCC) and carbon assessment (LCA) frameworks. Furthermore, a structured and systematic methodology was employed to select, organize, and analyze the relevant studies. The review highlights promising strategies, such as IoT-based smart energy systems, which have demonstrated up to 30% reductions in energy consumption. Furthermore, the integration of renewable resources such as solar, wind, geothermal, and biomass with thermal and electrical storage supports peak load reduction and improves resilience. Widely adopted simulation platforms (EnergyPlus, TRNSYS, DesignBuilder) enable robust evaluation, while LCC and LCA frameworks provide economic and environmental insights. Despite these advancements, challenges persist in data quality, system interoperability, and the absence of standardized evaluation methodologies.
Heat sinks have been widely used in cooling systems due to their high heat transfer efficiency. In this study, the thermal performance and fluid flow characteristics of conventional and triply periodic minimal surfaces (TPMS)-based heat sinks were investigated through detailed computational fluid dynamics (CFD) simulations. The results indicate that the TPMS-based heat sink, particularly SplitP, exhibited the highest heat transfer rate at 0.0082 W, which is more than ten times the rate of the conventional design (0.00076 W). The Gyroid structure also showed impressive performance with a 0.0022 W heat transfer rate. Furthermore, the performance evaluation criterion (PEC) was used to quantify the effectiveness of each design in terms of heat transfer efficiency. The PEC values obtained were 1.00 for the conventional heat sink, 1.17 for the Gyroid heat sink, showing a 17% improvement, and 1.43 for the SplitP heat sink, showing a 43% improvement. The findings from our study will inform future heat sink design, contributing to the development of more efficient cooling solutions by emphasizing the critical role of PEC in performance evaluation.
This study investigates the fluidic properties of the Diamond and SplitP structures with varying porosity levels (55%, 65%, and 75%) for tissue engineering applications using computational analysis. The scaffolds were designed using nTopology software and optimized to achieve the desired porosity and mechanical properties. The power law model was utilized to analyze blood as a non-Newtonian fluid. The study aims to optimize the scaffolds by observing fluidic characteristics such as permeability, pressure drop, and wall shear stress (WSS) to make them the optimal choice for bone tissue engineering applications. The results demonstrate that increasing porosity leads to higher permeability and lower pressure drop and WSS across the scaffolds. The findings suggest that the optimized Diamond and SplitP scaffolds with appropriate porosity levels can provide a suitable environment for cell adhesion, migration, proliferation, and differentiation, making them promising candidates for bone tissue engineering applications.