As known to all, hydrothermal synthesis is a powerful technique for preparing inorganic and organic materials or composites with different architectures. In this reports, by controlling hydrothermal conditions, nanostructured polyaniline (PANi) in different morphologies were composited with graphene sheets (GNS) and used as electrode materials of supercapacitors. Specifically, ultrathin PANi layers with total thickness of 10–20 nm are uniformly composited with GNS by a two-step hydrothermal-assistant chemical oxidation polymerization process; while PANi nanofibers with diameter of 50~100 nm are obtained by a one-step direct hydrothermal process. Benefitting from the ultrathin layer and porous structure, the sheet-like GNS/PANi composites can deliver specific capacitances of 532.3 to 304.9 F/g at scan rates of 2 to 50 mV/s. And also, this active material showed very good stability with capacitance retention as high as ~99.6% at scan rate of 50 mV/s, indicating a great potential for using in supercapacitors. Furthermore, the effects of hydrothermal temperatures on the electrochemical performances were systematically studied and discussed.
A composite lithium anode with built-in superionic conductive Li3N and LiNxOy phases can greatly promote the ionic diffusion capability of bulk lithium, simultaneously improve the wettability, and construct a robust ionic conductive interface.
A self-supporting Co3O4/graphene hybrid film has been constructed via vacuum filtration of Co(OH)2 nanosheet and graphene, followed by a two-step thermal treatment. Within the hybrid film, Co3O4 nanoparticles with size of 40~60 nm uniformly in-situ grew on the surface of graphene, forming a novel porous and interleaved structure with strong interactions between Co3O4 nanoparticles and graphene. Such fascinating microstructures can greatly facilitate interfacial electron transportation and accommodate the volume changes upon Li ions insertion and extraction. Consequently, the binder-less hybrid film demonstrated extremely high reversible capacity (1287.7 mAh g−1 at 0.2 A g−1), excellent cycling stability and rate capability (1110 and 800 mAh g−1 at 0.5 and 1.0 A g−1, respectively).
Direct application of metallic lithium (Li) as the anode in rechargeable lithium metal batteries (LMBs) is still hindered by some annoying issues such as lithium dendrites formation, low Coulombic efficiency, and safety concerns arising therefrom. Herein, an advanced composite separator is prepared by facilely blade coating lightweight and thin functional layers on commercial 12 µm polyethylene separator to stabilize the Li anode. The composite separator simultaneously improves the Li ion transport and lithium deposition behaviors with uniform lithium ion distribution properties, enabling the dendrite‐free Li deposition. As a result, the lithium anode can stably cycle up to 3000 cycles with the high capacity of 3.5 mAh cm−2. Moreover, the composite separator exhibits wide compatibility in LMBs (Li–S and Li‐ion battery) and delivers stable cycling performance and high Coulombic efficiency both in coin and lab‐level soft‐pack cells. Thus, this cost‐effective modification strategy exhibits great application potential in high‐energy LMBs.
A 4.5 V “dual carbon” LIC device is constructed based on all nitrogen doped graphene nanostructures. It could achieve an ultrahigh energy density of 187.9 W h kg−1 at a high power density of 2250 W kg−1 due to the alleviating kinetic mismatch.