As part of the strategy to achieve net-zero Greenhouse Gas (GHG) emissions in international maritime shipping, there is ongoing exploration into the use of wind propulsion systems as auxiliary ship propulsion devices. When considering a rigid sail as the wind propulsion system, evaluating the performance of a single sail is relatively simple. However, assessing the performance of multiple sails is more challenging due to the interference between the sails and between the sails and the hull. In this study, the thrust characteristics of two rigid sails attached to a ship are investigated by using Computational Fluid Dynamics (CFD). This includes considering the interference effects between the sails themselves and between the sails and the hull. The research reveals the innovative optimized angle of attack for maximizing thrust under tailwind conditions. At 150° in relative wind direction, the best performance is achieved with a low angle of attack on the fore side sail and a high angle of attack on the aft side sail. At 180° in relative wind direction, a high angle of attack on the fore side sail and a low angle of attack on the aft side sail yield the best results. Here, a “low” angle of attack means that the lift force is greater than the drag force, while a “high” angle of attack means the drag force is greater than the lift force. In this study, the force in the ship’s forward direction is only focused on optimizing the angles of attack of the two sails. However, the side forces caused by the sails are also significant for the ship’s sailing conditions. Therefore, future work will involve optimizing the angles of attack under drifting conditions.
This study investigates the sailing performance and maneuverability of a fully wind-powered ship equipped with two rigid wing sails and a rudder, using Computational Fluid Dynamics (CFD). Unlike some conventional approaches that separately analyze above-water and underwater forces, this research employs a comprehensive CFD model to predict ship motion and performance under various wind directions and sail angles, from a stationary state to steady sailing. The accuracy of the CFD method is confirmed through comparison with experimental drift test data. Although the simulated drift data showed some discrepancies from the observed data due to the difficulty of accurately modeling the wind field in the simulation, the results indicate that the CFD method can effectively reproduce the ship motions observed in the experiments. Simulations reveal that the previously proposed L-shaped and T-shaped sail arrangements, which were designed to maximize thrust without considering maneuvering effects, remain effective even when ship motion is included. However, the results also show that conventional sail arrangements can achieve higher steady-state speeds due to reduced leeway-related resistance, while the L-shaped and T-shaped arrangements yield distinct steady-state leeway (drift) characteristics under heading control. These findings suggest that dynamically adjusting sail arrangements according to operational requirements may help manage the ship’s trajectory (lateral offset) and mitigate maneuvering difficulties, contributing to the practical application of fully wind-powered ships. The study provides quantitative insights into the relationship between sail arrangement, acceleration, and leeway/drift behavior, supporting the design of next-generation wind-powered ships.
This study investigates the effects of roll, pitch, and heave on the motion characteristics of a fully wind-powered ship equipped with two rigid wing sails. While previous research by the authors demonstrated that L-shaped and T-shaped sail arrangements improve thrust generation and maneuverability, the importance of six-degree-of-freedom (6-DOF) motion modeling has not been fully clarified. To clarify this open question, the present work provides a systematic comparison between the 6-DOF model and a simplified three-degree-of-freedom (3-DOF) model in which roll, pitch, and heave are constrained. Four sail configurations are analyzed under true wind directions of 150° and 180°. The comparison reveals that the 3-DOF model cannot accurately reproduce key features of the ship’s trajectory, drift angle, and speed, particularly for cases where aerodynamic–hydrodynamic coupling strongly affects yaw stability. In contrast, the 6-DOF simulations reveal substantially different steady-state behavior and demonstrate that roll, pitch, and heave play an essential role in predicting maneuvering performance. The results clarify how sail arrangement and motion modeling interact to shape the maneuvering characteristics of fully wind-powered vessels, providing fundamental insights for the development of reliable 6-DOF simulation frameworks and for the design assessment of next-generation wind-propelled ships.