Micro/nano hierarchical structures could endow materials with various surface functions. However, the multilayer and multiscale characteristics of micro/nano hierarchical structures bring difficulties for their one step and controllable fabrication. Accordingly, based on tip-based fabrication techniques, this study proposed a micro-amplitude vibration-assisted scratching method by introducing a periodic backward displacement into the conventional scratching process, which enabled the synchronous creation of the microscale V-groove and nanoscale ripples, i.e. a typical micro/nano hierarchical structure. The experiments and finite element modeling were employed to explore the formation process and mechanism of the micro/nano hierarchical structures. Being different from conventional cutting, this method was mainly based on the plow mechanism, and it could accurately replicate the shape of the indenter on the material surface. The microscale V-groove was formed due to the scratching action, and the nanoscale ripple was formed due to the extrusion action of the indenter on the microscale V-groove’s surface. Furthermore, the relationships between the processing parameters and the dimensions of the micro/nano hierarchical structures were established through experiments, and optimized processing parameters were determined to achieve regular micro/nano hierarchical structures. By this method, complex patterns constructed by various micro/nano hierarchical structures were fabricated on both flat and curved surfaces, achieving diverse surface structural colors.
8 March 2024 in IEEE Transactions on Industrial Electronics
Micro/nano scratch testing is an effective technique for characterizing the mechanical properties and wear resistance of materials. In practical applications, most of the materials in equipment serve in a vibration environment. However, the scratching characteristics of materials under vibration environment have not been well investigated due to the lack of suitable testing instruments. To address this issue, in this article, we develop a vibration-assisted micro/nano scratch tester. Its working principle is introduced, followed by designing and analyzing the vibration platform. Then, the prototype is fabricated and a control system is established. After that, the key performance parameters of the tester are characterized. The results showed that the load noise is lower than 0.1 mN, and the vibration platform can generate a unidirectional vibration with the amplitude range of 0.2–11 μm and frequency range of 1–2000 Hz. To verify the feasibility of the proposed scratch tester, vibration-assisted scratch tests are performed on AL1050. It is shown that vibration during scratch testing leads to an increase in the residual scratch width and a decrease in the coefficient of friction and scratch hardness. These findings verify the effectiveness of the vibration-assisted micro/nano scratch tester and highlight the significance of considering vibration effects on the characterization of materials.
13 November 2022 in International Journal of Mechanical Sciences
Miniature actuators enable precision positioning and micro-manipulation in space-constrained environments, which is essential in diverse industrial and scientific fields. The piezoelectric actuators represent one of the most advanced solutions for high precision motion output with miniaturized dimension and weight. However, high performance vertical positioning poses a challenge for the miniature piezoelectric actuators. In this article, a novel miniature impact inertial piezoelectric actuator (IIPA) capable of operating with multiple motion directions was proposed. The auxiliary friction method was applied to reduce the inertial mass, improve output performances, and enhance the self-locking force. The finite-element method was utilized to optimize the structure of the IIPA, and its dimensions and weight were determined as 15.6 mm × 16.2 mm × 2 mm and 2.7 g. Experimental results demonstrated that the IIPA not only achieved stable horizontal and vertical motions but also maintained a high degree of motion consistency across various motion directions. The design based on the auxiliary friction method is anticipated to be an advanced and alternative solution for miniature IIPAs with high performance vertical positioning capability.
22 July 2025 in Mechanical Systems and Signal Processing