Some commercial units and industries need more amount of cooling than the power such as cold storage, shopping complex, etc. In this work, a new cooling cogeneration cycle (Srinivas cycle) has been proposed and solved to generate more cooling with adequate power generation from single source of heat at hot climatic conditions with ammonia–water mixture as a working fluid. The operational processes conditions for the proposed cooling cogeneration plant are different compared to the power-only (Kalina cycle system) system and cooling-only (vapor absorption refrigeration) system. This work focused to generate the optimum working conditions by parametric analysis from thermodynamic point of view. An increase in cycle maximum temperature is only supporting the power generation but not the cooling output. Cooling output is also 15 times more than power generation. So, it has been recommended to operate the integrated plant with low temperature heat recovery. The resulted cycle thermal efficiency, plant thermal efficiency, specific power, specific cooling, cycle power efficiency, cycle coefficient of performance (COP), and solar collector's specific area are 27%, 10%, 15 kW, 220 kW, 1.8%, 0.25, and 10 m²/kW, respectively.

The role of heat pumps is linked to the actions of human life. Even though the existing technologies perform well in general, they have still some problems, such as cost, installation area, components size, number of components, noise, etc. To address these issues, membrane technologies have been introduced in both heat and cooling devices. The present work proposes and studied the review of the role of membrane technology in the heat pumps. The study focuses on the advancement and replacement of membrane in the place of absorption and compression heat pump components. The detailed analysis and improvements are focused on the absorber, desorber, and heat and mass exchanger. The parameters conditions and operation of membrane technologies are given in detail. In addition to this, the innovation in the heat pumps using the membrane technology is given in detail.