In this paper we analytically investigate the electroviscous effect and electrokinetic energy conversion in the time periodic pressure-driven flow of an incompressible viscous Newtonian liquid through a parallel-plate nanochannel with surface charge-dependent slip. Analytical and semi-analytical solutions for electric potential, velocity and streaming electric field are obtained and are utilized to compute electrokinetic energy conversion efficiency. The results show that velocity amplitude and energy conversion efficiency are reduced when the effect of surface charge on slip length is considered. The surface charge effect increases with zeta potential and ionic concentration. In addition, the energy conversion efficiency is large when the ratio of channel half-height to the electric double layer thickness is small. The boundary slip results in a large increase in energy conversion. Higher values of the frequency of pressure pulsation lead to higher values of the energy conversion efficiency. We also obtain the energy conversion efficiency in constant pressure-driven flow and find that the energy conversion efficiency in periodical pressure-driven flow becomes larger than that in constant pressure-driven flow when the frequency is large enough.
6 August 2019 in Beilstein Journal of Nanotechnology
Time-periodic pressure-driven slip flow and electrokinetic energy conversion efficiency in a nanotube are studied analytically. The slip length depends on the surface charge density. Electric potential, velocity and streaming electric field are obtained analytically under the Debye–Hückel approximation. The electrokinetic energy conversion efficiency is computed using these results. The effects of surface charge-dependent slip and electroviscous effect on velocity and electrokinetic energy conversion efficiency are discussed. The main results show that the velocity amplitude and the electrokinetic energy conversion efficiency of the surface charge-dependent slip flow are reduced compared with those of the surface charge-independent slip flow.
The EOF of a viscoelastic Maxwell fluid driven by an alternating pressure gradient and electric field in a parallel plate microchannel with sinusoidal roughness has been investigated within the Debye–Hückel approximation based on boundary perturbation expansion and separation of variables. Perturbation solutions were obtained for the potential distribution, the velocity and the mean velocity, and the relation between the mean velocity and the roughness. There are significant differences in the velocity amplitudes of the Newtonian and Maxwell fluids. It is shown here that the velocity distribution of the viscoelastic fluid is significantly affected by the roughness of the walls, which leads to the appearance of fluctuations in the fluid. Also, the velocity is strongly dependent on the phase difference θ of the roughness of the upper and lower plates. As the oscillation Reynolds number ReΩ increases, the velocity profile and the average velocity um(t) of AC EOF oscillate rapidly but the velocity amplitude decreases. The Deborah number De plays a similar role to ReΩ, which makes the AC EOF velocity profile more likely to oscillate. Meanwhile, phase lag χ (representing the phase difference between the electric field and the mean velocity) decreases when G and θ are increased. However, for larger λ (e.g., λ > 3), it almost has no phase lag χ.
In this paper, the separation of variables method is applied to investigate the effects of solution pH, background salt concentration and AC electric field frequency on time periodic electroosmotic flow in a pH-regulated parallel-plate nanochannel. The surface charge is generated by the protonation and deprotonation of the functional group SiOH. The background salt is KCl. The pH value of the solution is adjusted by HCl and KOH. Analytical and semi-analytical solutions for electric potential and velocity distributions are obtained. The results show that the electric potential caused by the electric double layer depends greatly on the solution pH and background salt concentration. The amplitudes of the velocity and flow rate of the time periodic electroosmotic flow decrease with the background salt concentration and increase with the deviation of the solution pH from the isoelectric point. In a nanochannel having a height less than 100 nm, the electroosmotic velocity amplitude is not affected by the AC electric field frequency because the oscillating Reynolds number is much less than unity.
This study investigates the mass transfer characteristics of an oscillatory electro-osmotic flow (EOF) of generalized Maxwell fluids within hydrophobic nanochannels with mobile surface charges. We focus on the combined effects of surface charge mobility and non-Newtonian behavior on flow dynamics and mass transfer characteristics. To analyze this, we employ the finite difference method to derive the numerical solutions for electric potential, velocity, and concentration profiles within hydrophobic nanochannels. The mass transfer rate is computed through numerical integration of the product of velocity and concentration. Additionally, we derive analytical solutions for this problem under conditions of low zeta potential. By examining how variations in surface charge mobility, oscillating Reynolds number, and normalized relaxation time influence electro-osmotic velocity, concentration, and mass transfer rate, we aim to elucidate the intricate behaviors governing fluid motion and mass transport in nanoscale environments. Unlike the continuous reduction in velocity observed in the oscillatory EOF of Newtonian fluids, which is attributed to surface charge mobility, our findings reveal that, at low oscillating Reynolds numbers, surface charge mobility can positively impact the electro-osmotic velocity of Maxwell fluids. Remarkably, we observe an enhancement in the mass transfer rate ranging from 25% to threefold by considering the effects of surface charge mobility. These results hold significant theoretical importance for the optimization of nanofluidic devices, particularly in the context of nano-mixers and nano-reactors, which play a crucial role in enhancing mass transfer processes.
This study investigates the electroosmotic flow (EOF) of a two-layer Newtonian fluid system in a parallel plate microchannel with sinusoidal corrugated walls. The upper fluid is conducting, while the lower fluid is nonconducting. This analysis is performed under the Debye–Hückel approximation, utilizing perturbation expansion and the separation of variables. The potential distribution, velocity field, and the dependence of average velocity on roughness are derived. It is observed that the velocity distribution w(x, y), is significantly influenced by the phase difference θ between the corrugations on the upper and lower walls. The velocity w(x, y) decreases with an increase in the viscosity ratio μr of the bottom to top fluid, and w(x, y) is directly proportional to the dimensionless pressure gradient G and the zeta potential ratio ζ. The variation of the average velocity increment (roughness function) u2m related to wall roughness tends to decrease with the increase of the corrugation wave number λ, the electrokinetic width K, the depth ratio hr of the bottom to top fluid, the zeta potential ratio ζ and the dimensionless pressure gradient G; and increases with the increase of the viscosity ratio μr of the bottom to top fluid. Furthermore, the effect of uI2m is smaller than that of uII2m.