In this study, we investigated the influence of pH on the hydrothermal synthesis of copper (II) oxide CuO nanostructures with the aim of tuning their morphology. By varying the pH of the reaction medium, we successfully produced CuO nanostructures with three distinct morphologies including nanoparticles, nanorods, and nanosheets according to the pH levels of 4, 7, and 12, respectively. The observed variations in surface morphology are attributed to fluctuations in growth rates across different crystal facets, which are influenced by the presence of intermediate species within the reaction. This report also compared the structural and optical properties of the synthesized CuO nanostructures and explored their potential for photoelectrochemical glucose sensing. Notably, CuO nanoparticles and nanorods displayed exceptional performance with calculated limits of detection of 0.69 nM and 0.61 nM, respectively. Both of these morphologies exhibited a linear response to glucose within their corresponding concentration ranges (3–20 nM and 20–150 nM). As a result, CuO nanorods appear to be a more favorable photoelectrochemical sensing method because of the large surface area as well as the lowest solution resistance in electroimpedance analysis compared to CuO nanoparticles and nanosheets forms. These findings strongly suggest the promising application of hydrothermal-synthesized CuO nanostructures for ultrasensitive photoelectrochemical glucose biosensors.

Electrochemical and photoelectrochemical sensors are a rapidly developing field in analytical chemistry. However, commercial systems often lack versatility and affordability, hindering wider adoption. Additionally, the absence of integrated excitation light sources limits their application in photoelectrochemical sensing. Here, we present a highly precise, versatile, affordable measurement system for both electrochemical and photoelectrochemical sensing applications. The system incorporates a three-electrode potentiostat with a synchronized excitation light source. This design enables the system to perform conventional electrochemical measurements like cyclic voltammetry, chronoamperometry, and photoelectrochemical amperometric measurements with controlled light excitation. The developed measurement system operates within a voltage range suitable for a measurable current range of 1 nA to 18 mA, with a high precision of 99%. The excitation source is a monochromatic LED system offering seven distinct wavelengths with digitally controlled intensity via a digital-to-analog converter. Furthermore, an Android-based user interface allows wireless system control via Bluetooth Low Energy. The report also details the construction of a photoelectrochemical experiment using copper (II) oxide nanorods synthesized by the hydrothermal process as the photoactive material employed to test the experiment on a potassium ferricyanide/potassium ferrocyanide solution. This user-friendly system allows broader exploration of electrochemical and photoelectrochemical sensing applications.

This work demonstrates an AlGaN/GaN high electron mobility transistor (HEMT) with Cr/Graphene ohmic contacts constructed without heat treatment. The Cr/Graphene ohmic contact was fabricated using a spray-coated graphene nanoflakes solution and electron-beam-evaporated Cr. This method does not require a high-temperature annealing step in conventional Ti/Al/Ni/Au ohmic contact. It is suggested that the Cr/graphene combination acts similarly to a doped n-type semiconductor in contact with AlGaN/GaN heterostructures, enabling carrier transport to the AlGaN layer. The investigated Au/Cr/ Graphene/AlGaN/GaN HEMT device exhibits ohmic drain characteristics in the range of -4 V to 4 V of drain-source voltage with a calculated contact resistance density of 2.5 mΩcm2. Our results have important implications for the fabrication and manufacturing of AlGaN/GaN-based microelectronic and optoelectronic devices/sensors of the future.