Wireless networks-on-chips (NoCs) (WiNoCs) have emerged as a possible solution to the nonscalable multihop data transmission paths in traditional wired NoC architectures. Using low-power transceivers in NoC switches, novel WiNoC architectures have been shown to achieve higher energy efficiency with improved peak bandwidth and reduced on-chip data transfer latency. However, using wireless interconnects for intrachip data transfer over an unguided medium introduces additional security vulnerabilities in on-chip communication arising from either external attackers or internal hardware Trojans. In this article, we propose a mechanism to make the wireless communication in a WiNoC secure against persistent jamming-based denial-of-service (DoS) attacks and eavesdropping (ED) from both external and internal attackers. Persistent jamming attacks on the on-chip wireless medium will cause interference in data transfer over the duration of the attack resulting in errors in contiguous bits, known as burst errors. Therefore, we use a burst-error correction code to monitor the rate of burst errors received over the wireless medium and deploy a machine-learning (ML) classifier to detect the persistent jamming attack and distinguish it from random burst errors. In the event of a persistent jamming attack, alternate routing strategies are proposed to avoid the DoS attack over the wireless medium, so that a secure data transfer can be sustained even in the presence of persistent jamming. In the event of an external ED attack, we deploy a low-latency and lightweight data scrambling method to secure communication over the wireless channel. In the case of an internal ED, we propose a mechanism to identify the attacker and prevent the attack. We evaluate the proposed techniques on a WiNoC in the presence of DoS and ED attacks from both internal and external attackers. On an average, 99.87% of the attack on DoS detection was achieved with the chosen ML classifier. A bandwidth degradation of < 3% is experienced in the event of both DoS and ED internal attacks. The wireless interconnects are disabled in the presence of a persistent external jamming DoS attack for security, therefore eliminating the advantages of the wireless interconnections making the performance of the WiNoC comparable with that of a wired NoC. Although scrambling overheads are incurred in the presence of an external ED attack, the overheads are minimized by adopting simple XOR-based encoding and decoding.
With aggressive scaling of device geometries, density of manufacturing faults is expected to increase. Therefore, yield of complex Multi-Processor Systems-on-Chips (MP-SoCs) will decrease due to higher probability of manufacturing defects especially, in dies with large area. Therefore, disintegration of large SoCs into smaller chips called chiplets will improve yield and cost of complex platform-based systems. This will also provide functional flexibility, modular scalability as well as the capability to integrate heterogeneous architectures and technologies in a single unit. However, with scaling of the number of chiplets in such a system, the shared resources in the system such as the interconnection fabric and memory modules will become performance bottlenecks. Additionally, the integration of heterogeneous chiplets operating at different frequencies and voltages can be challenging. State-of-the-art inter-chip communication requires power-hungry high-speed I/O circuits and data transfer over long wired traces on substrates. This increases energy consumption and latency while decreasing data bandwidth for chip-to-chip communication. In this paper, we explore the advances and the challenges of interconnecting a multi-chip system with millimeter-wave (mm-wave) wireless interconnects from a variety of perspectives spanning multiple aspects of the wireless interconnection design. Our discussion on the recent advances include aspects such as interconnection topology, physical layer, Medium Access Control (MAC) and routing protocols. We also present some potential paradigm-shifting applications as well as complementary technologies of wireless inter-chip communications.
30 July 2021 in IEEE Consumer Electronics Magazine
With the ever-increasing demands of e-commerce, the need for smarter warehousing is increasing exponentially. Such warehouses require industry automation beyond Industry 4.0. In this work, we use consumer-grade millimeter-wave (mmWave) equipment to enable fast, and low-cost implementation of our localization system. However, the consumer-grade mmWave routers suffer from coarse-grained channel state information due to cost-effective antenna array design limiting the accuracy of localization systems. To address these challenges, we present a machine learning (ML) and Kalman filter (KF) integrated localization system (KF-Loc). The ML model learns the complex wireless features for predicting the static position of the robot. When in dynamic motion, the static ML estimates suffer from position mispredictions, resulting in loss of accuracy. To overcome the loss in accuracy, we design and integrate a KF that learns the dynamics of the robot motion to provide highly accurate tracking. Our system achieves centimeter-level accuracy for the two aisles with RMSE of 0.35 m and 0.37 m, respectively. Further, compared with ML only localization systems, we achieve a significant reduction in RMSE by 28.5% and 54.3% within the two aisles.
1 March 2021 in Sustainable Computing: Informatics and Systems
The fourth industrial revolution focuses on the digitization and automation of supply chains resulting in a significant transformation of methods for goods production and delivery systems. To enable this, automated warehousing is demanding unprecedented vehicle-to-vehicle and vehicle-to-infrastructure communication rates and reliability. The 60 GHz frequency band can deliver multi-gigabit/second data rates to satisfy the increasing demands of network connectivity by smart warehouses. In this paper, we aim to investigate the network connectivity in the 60 GHz millimeter-wave band inside an automated warehouse. A key hindrance to robust and high-speed network connectivity, especially, at mmWave frequencies stems from numerous non-line-of-sight (nLOS) paths in the transmission medium due to various interacting objects such as metal shelves and storage boxes. The continual change in the warehouse storage configuration significantly affects the multipath reflected components and shadow fading effects, thus adding complexity to establishing stable, yet fast, network coverage. In this study, network connectivity in an automated warehouse is analyzed at 60 GHz using Network Simulator-3 (NS-3) channel simulations. We examine a simple warehouse model with several metallic shelves and storage materials of standard proportions. Our investigation indicates that the indoor warehouse network performance relies on the line-of-sight and nLOS propagation paths, the existence of reflective materials, and the autonomous material handling agents present around the access point (AP). In addition, we discuss the network performance under varied conditions including the AP height and storage materials on the warehouse shelves. We also analyze the network performance in each aisle of the warehouse in addition to its SINR heatmap to understand the 60 GHz network connectivity.