In this study, SEM, AFM, TEM, XPS, and electrochemical tests are used to study the passivation behavior of chromium alloyed high-strength rebar in simulated concrete pore (SCP) solutions with different pH values. The results show that after passivation in SCP solution with different pH values, the passivating film on the surface of the chromium alloyed rebar primarily consists of a layer of nanoscale oxide particles, which makes the passive film exhibit a p-n type semi-conductor, and the passive film presents a rhombohedral crystal structure. As the pH value of the SCP solution decreases, the nanoscale oxide particles on the surface of the rebar become denser, which leads to a reduction in the carrier density (N_q and N_a) of the passive film and an increase in film resistance (R₂) and charge transfer resistance (R₃), thus increasing the corrosion resistance of the passive film. The passive film on the surface of the chromium alloyed high-strength rebar predominantly exhibits a three-layer structure, the outer passive film layer is composed of Fe oxides, the stable layer of the passive film is composed of Fe oxides and Cr oxides, and the growth layer of inner passive film is composed of Cr oxides. Compared with passivation 10 d in SCP solutions with pH 13.5 and pH 12.5, the passive film on the surface of the rebar has good stability at pH 10.5, which indicates that the addition of Cr is beneficial to promote the corrosion resistance of the rebar.