Yanjie Guo

Prof. Dr. Yanjie Guo


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 September 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
ZLZhimeng Liu
Zhimeng Liu
LWLifang Wang
Lifang Wang
YGYanjie Guo
Yanjie Guo
SLShufan Li
Shufan Li
This article proposes a primary-side linear control strategy to realize the constant current (CC)/voltage (CV) charging for the wireless power transfer system, based on the LCC-N magnetic integration and non-compensation circuit. Different from the conventional compensation topology used in control strategies, this article combines magnetic integration structure on the primary side and noncompensation topology on the secondary side, which reduces the size of the additional compensation inductor and makes the secondary side more compact. Moreover, the primary-side linear control strategy is studied by using the improved load parameters identification method, based on the LCC-N topology. First, the LCC-N magnetic integration and noncompensation topology is introduced. An improved load parameters identification method considering the non-pure resistive input impedance characteristics of the rectifier is proposed to identify the current, voltage and equivalent resistance of the load, based on the LCC-N topology. In the process of identification, the complicated relationship between the input impedance of the rectifier and the load is needless. Then, according to the LCC-N output characteristics and identified load parameters, the relationship between the input voltage and load current and voltage is simplified to linear through the linear superposition of fundamental wave and third harmonic. And a linear control strategy on the primary side is proposed to achieve CC/CV output. Finally, a 1 kW WPT prototype is built to verify the effectiveness of the proposed control strategy. The experimental results show that the maximum error of the output current is 1.8% during the CC charging, and the maximum error of the output voltage is 1.2% during the CV charging.

15 January 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YGYanjie Guo
Yanjie Guo
LWLifang Wang
Lifang Wang
YZYuwang Zhang
Yuwang Zhang
SLShufan Li
Shufan Li
CLChenglin Liao
Chenglin Liao
This paper presents the analysis of a rectifier load used for an electric vehicle (EV) wireless charging system, as well as its applications on compensation network design and system load estimation. First, a rectifier load model is established to get its equivalent input impedance, which contains both resistance and inductance components, and can be independently calculated through the parameters of the rectifier circuit. Then, a compensation network design method is proposed, based on the rectifier load analysis. Furthermore, a secondary side load estimation method and a primary side load estimation method are put forward, which adopt only measured voltages and consider the influence of the rectifier load. Finally, an EV wireless charging prototype is developed, and experimental results prove that the rectifier equivalent load can be correctly calculated on conditions of different system load resistances, rectifier input inductances, dc voltages, and mutual-inductances. The experiments also show that rectifier load equivalent inductance will impact system performances, and the proposed methods have good accuracy and robustness in the cases of system parameter variations.

9 July 2021 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
SLShufan Li
Shufan Li
LWLifang Wang
Lifang Wang
YGYanjie Guo
Yanjie Guo
ZLZhimeng Liu
Zhimeng Liu
Dynamic wireless power transfer (DWPT) technology is gradually making the prospect of charging on road of EVs (electirc vehicles) possible. However, DWPT system should be optimized in many aspects before it can really be utilized on road. For example, the control of energy transfer for a DWPT system is much complicated than a static wireless power transfer (WPT) system since the coupling of transceiving coils changes with the moving of the EV. In this article, an energy transfer control method based on the estimation of the load and mutual inductance of the segmented DWPT system is proposed. The relation between the load and the reflected impedance of the primary side is studied, and the parameters of the secondary-side LCC network are tuned to avoid the two-solution problems in the estimation of the load. Based on the results of estimation, a two-cases controlling strategy is proposed to switch between power- on station and detection station of the DWPT system according the target of energy transferring. A 800-W prototype of four-transmitting-coil dynamic WPT system is built and experiments show that the proposed energy-transfer control is proved to be efficient to regulate the energy and achieve fast response characteristics. Compared with the traditional controlling methods which usually aim to achieve maximum energy transfer, the method in this article can control the transferred energy according to the target value of energy, making the control more flexible without the use of communication.

25 June 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YGYanjie Guo
Yanjie Guo
YZYuwang Zhang
Yuwang Zhang
WZWenjie Zhang
Wenjie Zhang
LWLifang Wang
Lifang Wang
This article presents battery parameter identification methods considering a rectifier and battery load in wireless power transfer (WPT) systems. In order to reduce the cost and complexity brought by the wireless communication, the load parameters are usually identified through WPT primary side measurement to control the system. Compared with the conventional methods, battery state estimation and load parameter identification are achieved in this article based on only one measured WPT primary side variable. First, the WPT equivalent load is quantitatively expressed, which contains both resistance and inductance components. Then, identification methods for the battery voltage and equivalent resistance are proposed. Meanwhile, selection criteria for the primary side variables are studied to achieve a simple process and high accuracy. Furthermore, a WPT prototype is developed, and the experimental results prove the effectiveness of the equivalent load analysis and the proposed identification methods under the conditions of both battery voltage change and phase shift angle variation. Additionally, the robustness of the proposed methods is studied, considering compensation parameter changes and coil misalignment. Finally, the proposed methods are applied to battery state-of-charge (SOC) estimation, and the results suggest that the battery power shortage and full charge states can be estimated with high accuracy.

8 May 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
SLShufan Li
Shufan Li
LWLifang Wang
Lifang Wang
YGYanjie Guo
Yanjie Guo
CTChengxuan Tao
Chengxuan Tao
Li JiLi Ji
Li Ji
Power fluctuation caused by movement of the receiver has always been a difficult problem for the development of dynamic wireless charging of electric vehicles (EV). A segmented dynamic wireless charging system(DWCS) based on double transmitting coils and T-type compensation network is presented in this paper to restrain the power fluctuation. Cross coupling effects are removed by adding switches in series with the transmitting coils. A genetic algorithm based multi-object optimization for the power fluctuation factor and the reactive component is used to design the parameters of the T-type network. Simulations show that the optimization of the T-type network are not limited to a certain structure of the transmitter and receiver coils, but can minimize the power fluctuation factor for different values of the gap between the transmitting coils. Experiments for separated and overlapped transmitting coils show that the proposed DTCS T-type network can maintain the power fluctuation less than 6% of the average output power with the DC-DC efficiency above 85%.

1 August 2019 in IET Power Electronics
Verified
Journal Article
Open access
PDF file
YZYun Zhang
Yun Zhang
LWLifang Wang
Lifang Wang
YGYanjie Guo
Yanjie Guo
YZYuwang Zhang
Yuwang Zhang
Inductive power transfer is a method that can be used to transfer power to electric vehicles. The output power and the transmission efficiency drop significantly when there is a misalignment between receiver on the vehicle and transmitter on the parking spot. This can be resolved by designing the transmitter coil that produces uniform magnetic fields for wireless charging. Here, a planar rectangular coil with unevenly spaced turns is proposed for improving the uniform magnetic field distribution over the charging zone, together with the genetic algorithm for determining the geometric parameters of the coil structure. An analysis that is divided into four design variables is presented. The magnetic characteristic of the optimal unevenly spaced transmitter coil using genetic algorithm and optimal evenly spaced transmitter coil using conventional method are compared and analysed. The uniform magnetic field distribution of the designed prototype is measured by an electric and magnetic field probe and by a receiver coil. The measured results agree well with the theoretical values and validate the improved uniform magnetic field distribution.