Water being an essential component for plant growth and development, its scarcity poses serious threat to crops around the world. Climate changes and global warming are increasing the temperature of earth hence becoming an ultimate cause of water scarcity. It is need of the day to use potential soil amendments that could increase the plants’ resistance under such situations. Biochar and gypsum were used in the present study to improve the water use efficiency and growth of Abelmoschus esculentus L. Moench (Lady’s Finger). A six weeks experiment was conducted under greenhouse conditions. Stress treatments were applied after thirty days of sowing. Plant height, leaf area, photosynthesis, transpiration rate, stomatal conductance and water use efficiency were determined weekly under stressed (60% field capacity) and non-stressed (100% field capacity) conditions. Stomatal conductance and transpiration rate decreased and reached near to zero in stressed plants. Stressed plants also showed resistance to water stress upto five weeks and gradually perished at sixth week. On the other hand, water use efficiency improved in stressed plants containing biochar and gypsum as compared to untreated plants. Biochar alone is a better strategy to promote plant growth and WUE specifically of Abelmoschus esculentus, compared to its application in combination with gypsum.

Landfill leachate (LFL) treatment is a severe challenge due to its highly viscous nature and various complex pollutants. Leachate comprises various toxic pollutants, including inorganic macro/nano components, xenobiotics, dissolved organic matter, heavy metals, and microorganisms responsible for severe environmental pollution. Various treatment procedures are available to achieve better effluent quality levels; however, most of these treatments are nondestructive, so pollutants are merely transported from one phase to another, resulting in secondary contamination. Anaerobic digestion is a promising bioconversion technology for treating leachate while producing renewable, cleaner energy. Because of its high toxicity and low biodegradability, biological approaches necessitate employing other techniques to complement and support the primary process. In this regard, pretreatment technologies have recently attracted researchers’ interest in addressing leachate treatment concerns through anaerobic digestion. This review summarizes various LFL pretreatment methods, such as electrochemical, ultrasonic, alkaline, coagulation, nanofiltration, air stripping, adsorption, and photocatalysis, before the anaerobic digestion of leachate. The pretreatment could assist in converting biogas (carbon dioxide to methane) and residual volatile fatty acids to valuable chemicals and fuels and even straight to power generation. However, the selection of pretreatment is a vital step. The techno-economic analysis also suggested the high economic feasibility of integrated-anaerobic digestion. Therefore, with the incorporation of pretreatment and anaerobic digestion, the process could have high economic viability attributed to bioenergy production and cost savings through sustainable leachate management options.

Slaughterhouses generate a huge amount of highly polluted wastewater; if left untreated, this effluent could seriously threaten the environment and human health. In the present study, Ag₂O/Ba/TiO₂ nanocomposite was synthesized using the precipitation method, and its efficacy was investigated for the remediation of real slaughterhouse wastewater (SWW) under visible light. Its performance was assessed for the inactivation of bacterial strains identified in SWW and for the degradation of total organic solids, volatile solids, fixed solids, and heavy metals. The results indicated an excellent photocatalytic performance of the synthesized Ag₂O/Ba/TiO₂ nanocomposites, confirmed by 87.3% volatile solids, 30% total organic solids, and 40% fixed solids removal from SWW. The zone of inhibition runs from 4 to 9 mm, and the nanocomposites have demonstrated outstanding bacterial inactivation activity in this range. It has been shown that the synthetic Ag₂O/Ba/TiO₂ nanocomposites can function as an effective photocatalyst for the remediation of SWW and other waste products produced by various industries worldwide.

In the current state of huge waste production and energy crisis, there is a need to find additional alternate energy resources and options for waste management. The present study was designed to measure the potential of different fruit wastes to serve as substrate for lipid accumulation in oleaginous bacteria. For this purpose, three novel bacterial strains (AF3, KM1 and KM10) isolated from the crude oil samples were systematically compared for their lipid accumulation potential using three types of waste including orange waste (OW), mango waste (MW) and apple waste (AW). Using waste as sole substrate, it was observed that maximum lipid accumulation by each strain was above 20%, which confirms that the bacteria belong to the oleaginous group. However, each bacterial isolate represented differential accumulative capacity with varying organic matter removal efficiency. Maximum lipid accumulation was achieved by KM10 (>25%) with AW as substrate, and KM1 (>24%) with MW as substrate; however, AF3 represented only 21% lipid accumulation using AW as substrate. Similarly, the maximum removal efficiency was recorded for KM10 in AW, followed by OW, where >60% and >50% of volatile solids (VS) removal, respectively, were achieved over the period of 7 days of incubation. This showed that the oleaginous strains also exhibit excellent waste treatment efficiency. The 16s RNA gene sequencing results showed that these KM1 and KM10 strains were Serratia surfactantfaciens and Serratia liquefaciens. In the end, a circular economy model was presented to highlight the significance of the mechanisms, which offers dual benefits over the linear economy model. Overall, the findings of the present study revealed that the novel oleaginous strains not only provide considerable lipid accumulation, but are simultaneously capable of low-cost waste treatment.

The current paper investigated the potential of oleaginous fungus Rhizopus oryzae B97 for lipid accumulation under varying process variables. The fungal strain was isolated from bread mold and analyzed for its potential to grow on sludge with simultaneous production of microbial lipids. The sludge sample was sourced from the wastewater treatment plant located in Sector I-9, Islamabad. The effects of various process variables, such as pH, temperature, carbon and nitrogen sources, and shaking, on lipid accumulation, cell dry weight (CDW), chemical oxygen demand (COD), and volatile solids (VS) removal were investigated. It was found that glucose and yeast promoted the maximum lipid accumulation. At the same time, the fungal biomass reached its maximum value of up to 64% at 30 °C and at pH 4 (CDW: 28 g/L). These process conditions also improved the sludge treatment efficiency, achieving 68% COD and 55% VS removal in 168 h. FTIR analysis of the accumulated lipids indicated strong characteristic peaks of functional groups associated with fatty acids. The GC-MS analysis confirmed the production of essential FAMEs required in biodiesel production from the corresponding fatty acids, such as oleic acid, palmitic acid, stearic acid, and erucic acid. Operation in a continuous-shaking aerobic batch reactor (CSABR) system under optimum conditions further improved the process efficiency. Overall, the results indicated the competent potential of oleaginous fungus Rhizopus oryzae B97 for lipid-based biofuel production through fatty acid transesterification.

Industrial wastewater in Islamabad has led to serious environmental and human health impacts due to the release of endocrine-disrupting chemicals (EDCs) and volatile organic compounds (VOCs) in the water bodies. The advent of wastewater treatment technologies has led to the development of novel approaches like the use of an electrocatalyst for efficient and safe removal of toxic contaminants from the wastewater. In this study, an efficient tri-metallic NiCoFe₂-LDH electrocatalyst was prepared by optimizing the metal ratios in the synthesis process using a co-precipitation method. The catalyst was characterized by various tools such as UV-visible spectroscopy, SEM, EDX, and FTIR. A three-electrode electrochemical system (counter, reference, and working electrodes) was used for electrocatalytic activity and simultaneous removal of EDCs from the wastewater. Wastewater samples were collected from selected locations along the industrial discharge channel (Nullah Lai) in the industrial zone of Islamabad city. The physio-chemical analysis showed significant water pollution, including EDCs, VOC, and heavy metals. The electrochemical treatment using NiCoFe₂-LDH demonstrated high efficiency across different scan rates (5 to 50 mV/s) and voltages (−0.02 to 1.6 V); for instance, at 1.6 V, the current density rises from 10 mA/cm² in Scan 5 to 50 mA/cm² in Scan 50. Furthermore, COD levels were significantly reduced by 74.9%, from 665.6 mg/L to 166.4 mg/L, after electrochemical treatment with NiCoFe₂-LDH. GCMS analysis of organics revealed that the electrochemical process was effective in reducing several EDC- and VOC-related peak groups. Overall, this study highlights the potential of the electrochemical approach for treating EDC-contaminated wastewater and its applicability as a sustainable solution for industrial wastewater treatment.