Antimony (Sb) is toxic to ecosystems and potentially to public health via its accumulation in the food chain. Bioavailability and toxicity of Sb have been reduced using various methods for the remediation of Sb-contaminated soil in most studies. However, Sb-contaminated soil remediation by microbial agents has been rarely evaluated. In this study, we evaluated the potential for the use of Comamonas testosteroni JL40 in the bioremediation of Sb-contamination. Strain JL40 immobilized more than 30 % of the Sb(III) in solution and oxidized over 18 % to Sb(V) for detoxification. Meanwhile, strain JL40 responds to Sb toxicity through such as Sb efflux, intracellular accumulation, biofilm production, and scavenging of reactive oxygen species (ROS), etc. The results of the pot experiment showed the average Sb content of the brown rice was decreased by 59.1%, 38.8%, and 48.4%, for 1.8, 50, and 100 mg/kg Sb spiked soils, respectively. In addition, the results of plant, soil enzyme activity, and rice agronomic trait observations showed that the application of strain JL40 could maintain the health of plants and soil and improve rice production. The single-step and sequential extraction of Sb from rhizosphere soil showed that strain JL40 also plays a role in Sb immobilization and oxidation in the soil environment. During rice potted cultivation, bacterial community analysis and plate counting showed that the strain JL40 could still maintain 103 CFU/g after 30 days of inoculation. With phenotypic and differential proteomics analysis, strain JL40 conferred Sb(III) tolerance by a combination of immobilization, oxidation, efflux and scavenging of ROS, etc. Our study demonstrates the application of Sb-immobilizing and oxidizing bacteria to lower soil Sb and reduce accumulation of Sb in rice. Our results provide guidance for bacterial remediation of Sb-contaminated soil.
25 January 2023 in IEEE Transactions on Instrumentation and Measurement
There are many types of acoustic sources in the ultra-high voltage (UHV) substation. The acoustic signals of UHV shunt reactors obtained by direct measurement include many other phase reactor acoustic signals that are very similar to the subjected reactors in frequency domain characteristics, as well as cooling fans and random noise. An UHV shunt reactor acoustic signal separation method based on beamforming and undetermined blind source separation was proposed. In this method, the existing beamforming is improved to masking beamforming, which can separate those acoustic components differing from the spatial characteristics of the subjected reactor. Then, undetermined blind source separation was adopted to remove the acoustic components which are different from the frequency domain characteristics of the subjected reactor. Laboratory and substation tests were conducted respectively. The results show that the method proposed in this research can obtain the acoustic signal with a power spectrum similarity of 0.924 from the original mixed acoustic signal with the power spectrum similarity of 0.617, which can verify the feasibility of the method.
1 January 2019 in Mathematical Problems in Engineering
A new three‐dimensional (3D) analysis method is proposed as the existing two‐dimensional (2D) method has low accuracy in analysing the vibration characteristics of oil‐immersed shunt reactors, such as ultrahigh‐voltage (UHV) shunt reactors. First of all, a set of 3D laminated coordinate systems was defined based on silicon steel lamination rules, in which the anisotropy of magnetic properties for laminated silicon steel in the rolling direction (RD), the transverse direction (TD), and the lamination direction (LD) were considered. Then, the mapping between laminated coordinate systems and space rectangular coordinate system was established to unify the parameters in different laminated coordinate systems. With the mapping, the anisotropy of the magnetic properties in the laminated coordinate systems was transformed into a rectangular coordinate system. Next, two sets of comparative studies between the new 3D method and the traditional 2D method were carried out, which show that the 3D method has high precision and a wide application range. Finally, the relationship between air gap number and core vibration of UHV shunt reactors was studied by the new 3D method. The results show that, as the number of air gaps increases, the magnetic flux density and the total force area of Maxwell force are increased, resulting in the intensification of core vibration. The conclusions of this paper are helpful for the design of large oil‐immersed reactors.
30 November 2023 in IEEE Transactions on Dielectrics and Electrical Insulation
A ultra-high voltage (UHV) shunt reactor is accompanied by continuous strong vibration during operation, and its internal partial discharge is often associated with mechanical vibration of its electrodes. To explore the mechanism of the effect of electrode vibration on the partial discharge inside the reactor, a joint vibration-partial discharge test platform was established based on a partial discharge model of the oil-paper insulated needle board electrode. The influences of the amplitude and frequency of vibration on the partial discharge characteristics of the needle board in oil under power frequency voltage were studied. The results show that with the increases in the amplitude and frequency of vibration, the discharge process is intensified, the discharge repetition rate and the maximum discharge quantity increase, and the negative half-cycle discharge pattern exhibits “zero crossing”. The discharge intensity of the needle-plate electrodes is affected by velocity of the oil flow velocity and field intensity; the field intensity has a more significant effect on the partial discharge. When partial discharge occurs without vibration, the characteristic gases produced by the needle-plate discharge are mainly H 2 and C 2 H 2 , and contain a small amount of CH 4 and C 2 H 4 . With the increases in the amplitude and frequency of vibration, the content of each characteristic gas increases, and vibration changes the spatial distribution of dissolved gas in the oil by driving the motion of the insulating oil around the electrode.
27 September 2025 in International Journal of Electrical Power & Energy Systems
The acoustic signals generated by ultra-high voltage shunt reactors during operation contain valuable information about the operating status of reactors. By deploying acoustic sensor devices, on-line monitoring and diagnostics can be achieved. The placement of these sensor points affects the effectiveness of monitoring and diagnosis. To improve field monitoring effectiveness, an optimization method for monitoring point locations is proposed based on conditional mutual information (CMI) and Chaos Particle Swarm-Gray Wolf Optimization (CPSO-GWO) hybrid algorithm. First, a simulation model of the near-field acoustic environment of reactors is constructed to obtain the acoustic characteristics of external sensor points. Based on this, CMI is utilized to assess the ability of sensor signals to represent the equivalent sound-source signals from the oil tank surface. The CPSO-GWO algorithm is then employed to optimize the selection of multiple optimal acoustic monitoring points, with the goal of maximizing CMI. Taking the 500 kV high-voltage parallel reactor at a converter station as an example, simulation and experimental verification demonstrate that this proposed method is highly applicable and effective in optimizing the placement of multiple acoustic monitoring points for reactors. The CMI value of the four optimized points reaches 2.226, indicative of improvements of 1.682 and 1.331 compared to random selection (0.544) and correlation-based methods (0.895), respectively. This significantly enhances the acoustic characterization of the reactor’s operational state and provides a more comprehensive reflection of its acoustic properties. The method not only resolves issues related to sensor redundancy and improves the placement accuracy but also compensates for the limitations of existing single-point optimization strategies. The research provides a practical and feasible technical solution for optimization of acoustic monitoring points in fields such as acoustic monitoring and fault diagnosis.