In this research, the effects of modifiers on the high-temperature rheological and fatigue properties of asphalt were investigated by utilizing montmorillonite (MMT) and organic montmorillonite (OMMT) as modifiers for 70# and styrene butadiene styrene (SBS) asphalt, respectively. Temperature scanning tests and linear amplitude scanning (LAS) tests were performed using a dynamic shear rheometer (DSR) to evaluate the viscoelasticity, rutting resistance, and fatigue properties of the asphalt binder. The rheological properties under high-temperature and high-frequency conditions were also characterized by the Black curve and Cole–Cole transformation. Additionally, the elastic properties of the asphalt were examined using nanoindentation (NI). The results of the DSR tests indicate that the incorporation of MMT/OMMT into asphalt enhances its elastic properties and reduces its viscous properties, leading to improved resistance to shear deformation, rutting, and fatigue. Moreover, the NI tests show that the addition of MMT or OMMT improves the elastic properties of the asphalt, while also validating the effectiveness of nanoindentation in assessing the viscoelasticity of asphalt.
This study developed a nano-TiO2 modified emulsified asphalt, and the effects of varying dosages of nano-TiO2 on the performance of emulsified asphalt were systematically investigated. The photocatalytic performance of nano-TiO2 modified emulsified asphalt was evaluated through NOx degradation assessment using a self-developed device. Results showed that after adding nano-TiO2, the high-temperature stability and aging resistance of the modified emulsified asphalt had improved. Specifically, when the TiO2 content ranged from 4% to 6%, the surface temperature of the photocatalytic fog seal layer decreased by 2.0 °C. At 4% TiO2 content, the cumulative degradation efficiencies of NO and NO2 reached 50% and 70%, respectively. When the fog seal layer spraying amount was set at 300 g/m2, the pavement performance met the required standards. Overall, nano-TiO2 photocatalytic materials simultaneously enhance the physical properties of asphalt and its environmental benefits, providing a promising solution for the development of multifunctional pavement materials.