In this manuscript, a broadband transmitarray antenna (TA) using a metasurface-based element is presented for millimeter-wave communication applications. The metasurface-based TA element adopts a receiver–transmitter configuration: metasurfaces are applied as the receiver and transmitter, and slot-coupled differentially fed striplines are used as the phase compensation. The designed TA element achieves good transmission performance with a more than 360° transmission phase shift range and less than 1-dB transmission insertion loss within a wide frequency range. To verify the proposed TA, a prototype is fabricated based on the conventional printed circuit board (PCB) process, and a pyramid horn is designed as the source. The measured results show that the proposed TA with the differential feed network presents a 1-dB gain bandwidth of 26.2% from 23.5 to 30.5 GHz and a peak gain of 24.5 dBi. The designed TA is a promising alternative for millimeter-wave communications applications because of its high gain, broad bandwidth, low costs, and convenient integration with other circuits.

Laser metal deposition (LMD) is a technology for the production of near-net-shape components. It is necessary to control the manufacturing process to obtain good geometrical accuracy and metallurgical properties. In the present study, a closed-loop control method of melt pool temperature for the deposition of small Ti6Al4V blocks in open environment was proposed. Based on the developed melt pool temperature sensor and deposition height sensor, a closed-loop control system and proportional-integral (PI) controller were developed and tested. The results show that with a PI temperature controller, the melt pool temperature tends to the desired value and remains stable. Compared to the deposition block without the controller, a flatter surface and no oxidation phenomenon are obtained with the controller.