Surface effects often play a significant role in the physical properties of micro- and nanosized materials and structures. In this letter, the authors presented a theoretical model directed towards investigation of the effects of both surface elasticity and residual surface tension on the natural frequency of microbeams. A thin surface layer was introduced on the upper and lower surfaces to rationalize the near-surface material properties that are different from the bulk material. An explicit solution is derived for the natural frequency of microbeams with surface effects. This study might be helpful for the design of microbeam-based sensors and some related measurement techniques.

Based on the conventional Euler buckling model, uniaxial compression tests have been utilized recently to measure the mechanical properties of nanowires. However, owing to the increasing ratio of surface area to bulk at nanoscale, the influence of surface energy becomes prominent and should be taken into consideration. In this letter, an analytical relation is given for the critical force of axial buckling of a nanowire by accounting for both the effects of surface elasticity and residual surface tension. This study might be helpful to characterize the mechanical properties of nanowires or design nanobeam-based devices in a wide range of applications.

Based on the surface elasticity theory, we examined the effects of surface stresses on nanosized contact problems. The Fourier integral transform method is adopted to derive the general solution for the contact problem under pressure. As two examples, the deformations induced, respectively, by a uniform distributed pressure and a concentrated force are analyzed in detail. The results indicate some interesting characteristics in contact mechanics, which are distinctly different from those in classical elasticity theory. Both the contact normal stress and the deformation gradient on the deformed surface vary smoothly across the loading boundary as a result of surface stress. In addition, the indent depth and the maximum normal contact stress depend strongly on the surface stress for nanoindentation.

The atomic force microscopy (AFM) has been widely used to measure the mechanical properties of biological cells through indentations. In most of existing studies, the cell is supposed to be linear elastic within the small strain regime when analyzing the AFM indentation data. However, in experimental situations, the roles of large deformation and surface tension of cells should be taken into consideration. Here, we use the neo-Hookean model to describe the hyperelastic behavior of cells and investigate the influence of surface tension through finite element simulations. At large deformation, a correction factor, depending on the geometric ratio of indenter radius to cell radius, is introduced to modify the force-indent depth relation of classical Hertzian model. Moreover, when the indent depth is comparable with an intrinsic length defined as the ratio of surface tension to elastic modulus, the surface tension evidently affects the indentation response, indicating an overestimation of elastic modulus by the Hertzian model. The dimensionless-analysis-based theoretical predictions, which include both large deformation and surface tension, are in good agreement with our finite element simulation data. This study provides a novel method to more accurately measure the mechanical properties of biological cells and soft materials in AFM indentation experiments.