An optical fiber microdisplacement sensor based on symmetric Mach-Zehnder interferometer (MZI) with a seven-core fiber and two single-mode fiber balls is proposed. The rationality and manufacturing process of the MZI sensing structure are analyzed. The fabrication mechanism of the Mach-Zehnder sensor by CO2 laser is described in detail. Experimental results show that temperature sensitivities of the two dips are 98.65 pm/°C and 89.72 pm/°C, respectively. The microdisplacement sensitivities are 2017.71 pm/mm and 2457.92 pm/mm, respectively. The simultaneous measurement of temperature and microdisplacement is demonstrated based on the sensitive matrix. The proposed Mach-Zehnder interference sensor exhibits the advantages of compact structure, simple manufacturing process, and high reliability.
A switchable and stable triple-wavelength, ring-cavity, erbium-doped fibre laser incorporating an all-fibre Fabry–Perot interferometer (FPI) is designed and experimentally demonstrated. In the proposed fibre laser, the all-fibre FPI is fabricated using the chemical etching method and is used to generate the filter effect. The laser threshold is 88 mW. Switchable single-wavelength lasing at 1529.9, 1545.1 and 1560.2 nm can be realized with a power fluctuation less than 0.64 dB under 20 min of scanning time at room temperature. In addition, the wavelength-switchable dual-wavelength lasers can be tuned by changing the polarization state in the experiment, and the maximum power fluctuations for the 1545.1 and 1560.2 nm lasers are less than 1.19 and 1.57 dB at 26 °C, respectively. Furthermore, a triple-wavelength laser is obtained by adjusting the polarization controller. The results demonstrate that switchable single-, dual-, or triple-wavelength lasers can be generated through the proposed fibre laser.
We propose a point-by-point inscription method for fiber Bragg grating (FBG) fabrication using a femtosecond pulsed laser focused through a fiber polyimide coating, realizing a 2-μm-wavelength-band FBG. A femtosecond laser acts as the inscription laser, focused by a 63× oil lens. A first-order FBG was fabricated with a grating interval of 700 nm. The 15-μW pulsed laser was focused directly on the fiber core through the polyimide coating and cladding. A first-order FBG for 2004.8-nm light with more than 56% reflectances was fabricated. High wavelength sensitivity and linearity of the FBG were demonstrated by temperature and strain-sensing testing. The first-order FBG of 2004.8 and 2000.2 nm resonant wavelengths could be realized simultaneously through parallel inscription method in 3000μm long grating area.