Studies have shown that vehicle trajectory data are effective for calibrating microsimulation models. Light Detection and Ranging (LiDAR) technology offers high-resolution 3D data, allowing for detailed mapping of the surrounding environment, including road geometry, roadside infrastructures, and moving objects such as vehicles, cyclists, and pedestrians. Unlike other traditional methods of trajectory data collection, LiDAR’s high-speed data processing, fine angular resolution, high measurement accuracy, and high performance in adverse weather and low-light conditions make it well suited for applications requiring real-time response, such as autonomous vehicles. This research presents a comprehensive framework for integrating LiDAR sensor data into simulation models and their accurate calibration strategies for proactive safety analysis. Vehicle trajectory data were extracted from LiDAR point clouds collected at six urban signalized intersections in Lubbock, Texas, in the USA. Each study intersection was modeled with PTV VISSIM and calibrated to replicate the observed field scenarios. The Directed Brute Force method was used to calibrate two car-following and two lane-change parameters of the Wiedemann 1999 model in VISSIM, resulting in an average accuracy of 92.7%. Rear-end conflicts extracted from the calibrated models combined with a ten-year historical crash dataset were fitted into a Negative Binomial (NB) model to estimate the model’s parameters. In all the six intersections, rear-end conflict count is a statistically significant predictor (p-value < 0.05) of observed rear-end crash frequency. The outcome of this study provides a framework for the combined use of LiDAR-based vehicle trajectory data, microsimulation, and surrogate safety assessment tools to transportation professionals. This integration allows for more accurate and proactive safety evaluations, which are essential for designing safer transportation systems, effective traffic control strategies, and predicting future congestion problems.

Object occlusion is a common challenge in roadside LiDAR-based vehicle tracking. This issue can cause variances in vehicle location and speed calculations. This paper proposes a vehicle tracking post-processing method designed to handle full occlusion and limited datapoint conditions. The first part of the method focuses on linking the disconnected trajectories of the same vehicle caused by full occlusion. The second part refines the vehicle representative point to enhance tracking accuracy. Performance evaluation demonstrates that the proposed method can detect and reconnect the trajectories of the same vehicle, even under prolonged full occlusion. Moreover, the refined vehicle representative point provides more stable speed estimates, even with sparse datapoints. This significantly increases the effective detection range of roadside LiDAR. This approach lays a strong foundation for the application of roadside LiDAR in emission analysis and near-crash studies.

Traffic safety assessments rely on Surrogate Safety Measures (SSMs), yet their diversity hinders understanding and selection. This paper proposes a novel conceptual framework to systematically categorize SSMs through what we term Motion Scenario Mapping, an approach inspired by queuing theory notation and the concept of short-term behavioral storytelling. The framework explicitly defines interaction stories between a following and leading vehicle to reveal hidden assumptions within each SSM, achieved through a combined coding system. Examining ten common SSMs, the research demonstrates that the framework effectively exposes underlying assumptions, enabling critical evaluation of their contextual validity. By emphasizing short-term risk dynamics, this approach offers a structured understanding of interaction mechanisms and provides a systematic foundation for comparing existing SSMs, identifying research gaps, and guiding future development. This structured ontology has the potential to enhance the analysis and design of safety measures for future transportation systems.

Roadside LiDAR is a key sensing technology for intelligent transportation systems (ITSs) due to its high-precision spatial information and reliable monitoring of traffic environments. However, extracting traffic information from LiDAR point cloud data remains challenging because measurements are produced through angular sampling, causing the spacing between adjacent points to depend on radius and beam distribution. This study proposes a geometry-aware framework that incorporates LiDAR sampling geometry into the neighborhood criterion used to determine point-to-point association. The formulation defines neighborhood tolerance as a function of radial distance and vertical angular separation, enabling clustering decisions that are consistent with the sensing mechanism. In addition, the approach integrates deployment constraints based on sensor mounting height and region-of-interest limits to maintain physically meaningful connectivity under roadside sensing conditions. A systematic calibration procedure is conducted to estimate the scaling factor and radial spacing parameters and evaluate the method using both controlled and real-world datasets. Experimental results reveal that the proposed approach improves clustering accuracy and stability by reducing false negatives in sparse regions while avoiding excessive cluster merging in dense areas. The method demonstrates robust performance across varying sensing conditions and achieves higher accuracy than baseline approaches without parameter retuning, while introducing negligible computational overhead.

Studies have shown that vehicle trajectory data are effective for calibrating microsimulation mod-els. Light Detection and Ranging (LiDAR) technology offers high-resolution 3-D data, allowing for detailed mapping of the surrounding environment, including road geometry, roadside infrastruc-tures, and moving objects such as vehicles, cyclists, and pedestrians. This research presents a comprehensive framework for integrating LiDAR sensor data into simulation models and accu-rately calibrating for proactive safety analysis. Vehicle trajectory data were extracted from LiDAR point cloud collected at six urban signalized intersections in Lubbock, Texas in USA. Each study intersection was modelled with PTV VISSIM and calibrated to replicate the observed field scenarios. The Directed Brute Force method was used to calibrate two car-following and two lane-change parameters of Wiedemann 1999 model in VISSIM, resulting in an average accuracy of 92.7%. Rear-end conflicts extracted from the calibrated models combined with a ten-year historical crash dataset were fitted into a Negative Binomial (NB) model to estimate the model's parameters. In all the six intersections, rear-end conflict count is a statistically significant predictor (p-value < 0.05) of observed rear-end crash frequency. The outcome of this study provides a framework for the com-bined use of LiDAR-based vehicle trajectory data, microsimulation and surrogate safety assessment tools to transportation professionals for proactive safety evaluation.

Annual intersection screening determines which locations enter safety evaluation when severe crashes are sparse and review budgets are limited. Severity weighted crash frequency gives agencies a traceable additive score, but each crash enters that score through a fixed severity class value. This study tests whether calibrated crash level probabilities of fatal or suspected serious injury can replace those fixed values without losing the audit structure of an additive site score. Crash Records Information System records from two Texas urban networks were processed through separate regional pipelines. Records were collapsed to the crash level, assigned deterministic intersection keys, screened for outcome leakage, modeled with balanced logistic regression, calibrated with sigmoid calibration using the last screening year, and aggregated to intersection scores. Scores from 2016 through 2021 crash histories were evaluated against fatal or suspected serious injury crashes observed from 2022 through 2025. At the 5% screening threshold, the probability weighted ranking captured 61 future severe crashes within the midsized network compared with 47 under fixed severity weighting, and 515 within the larger metropolitan network compared with 445. The same ordering held at the 10% and 15% thresholds. Probability weighted rankings also produced higher adjacent year Spearman rank stability in every evaluated base year. The evidence supports calibrated crash level probability as a consequence contribution for intersection network screening when calibration and leakage controls are maintained at the local data scale.