With the continuous advancement of science and technology, there is a growing global focus on new energy sources. Despite the rapid progress of offshore wind power generation systems, they are still plagued by issues such as significant transmission loss, limited transmission distance, and low-frequency oscillation, which hinder further development. To address these challenges, the Flexible Direct Current Transmission System (VSC-HVDC) has emerged as a widely studied solution. The integration of energy storage power stations presents new opportunities for enhancing offshore wind power transmission systems. These power stations not only serve as energy buffer pools to reduce transmission loss but also improve transmission efficiency through intelligent regulation and control, effectively mitigating low-frequency oscillation. This article introduces an optimization control parameter design method based on sensitivity analysis to enhance the stability of MTDC based on MMC. It outlines the topology structure of the offshore VSC-HVDC system, covering the main circuit and control system. Additionally, the article delves into the derivation of the small signal stability model of the system and investigates the selection of control parameters based on the eigenvalue objective function. Lastly, it analyzes the impact of the control system on the stability of the wind power flexible direct output converter station, highlighting the significant influence of control system parameters on the small signal stability of MTDC systems based on MMC. The MMC parameter selection strategy proposed in this paper is shown to effectively enhance system stability.
Although voltage regulation in distributed generation (DG) in offshore wind power systems has been deeply studied, information on the global communication network structure and high communication bandwidths still remain key factors restricting the integration of a high proportion of new energy sources. In order to achieve precise voltage regulation while reducing communication, this paper proposes a fully distributed dynamic event-triggered secondary voltage restoration control for offshore wind power systems. Firstly, the nonlinear system model is switched to the linear second-order multi-agent system (MAS) by feedback linearization. This is a crucial step for the subsequent research. From there, a fully distributed voltage restoration control strategy is proposed, which utilizes adaptive event-triggered protocol. The proposed protocol operates independently of global information. Finally, the effectiveness of the control protocol is verified through simulation.