Ketone compounds are oxidation products of crude oil in the in-situ combustion (ISC) process. Revealing the molecular composition of ketones can provide theoretical guidance for understanding the oxidation process of crude oil and valuable clues for studying the combustion state of crude oil in the reservoir. In this study, low-temperature oxidation (LTO) processes were simulated in thermal oxidation experiments to obtain thermally oxidized oil at different temperatures (170 °C, 220 °C, 270 °C, and 320 °C). A combination of chemical derivatization and positive-ion electrospray (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used to analyze the molecular composition of different kinds of ketones (fatty ketones, naphthenic ketones, and aromatic ketones) in the oxidized oils at different temperatures. The results showed that the concentration of aliphatic ketones and aliphatic cyclic ketones in the product oils decreased with the increase in temperature, while aromatic ketones increased with the increase in temperature. At the same oxidation temperature, the content of ketones follows this order: fatty ketones < cycloalkanes < aromatic ketones. The concentrations of ketones reached their maximum value at 170 °C and decreased at high temperatures due to over-oxidation. It was also found that nitrogen-containing compounds are more easily oxidized to ketone compounds than their hydrocarbon counterparts in the LTO process.

Polyglycolic acid (PGA) is a biologically friendly material with a wide range of applications. The production of dimethyl oxalate using coal-based syngas and the hydrogenation of dimethyl oxalate can produce the polymerization raw material of PGA, glycolide, which requires a methyl glycolate polymerization and depolymerization process. The intermediate products of the production process were analyzed using gas chromatogram-mass spectrometry (GC-MS) and Orbitrap mass spectrometry (Orbitrap MS), which revealed the presence of cyclic and linear PGAs with different capped ends. The impurities present in the oligomer were mostly methyl-capped PGA and were retained in the subsequent depolymerization process to glycolide, solvent washing can be used to remove this part of the impurity and ultimately obtain a refined glycolide product. Furthermore, it is proposed that the use of the specialized Kendrick Mass Defect (KMD) to plot and analyze PGA compounds obtained using mass spectrometry can enable the direct classification of PGAs without the need for exact molecular formula assignment.