In this article, a full-order observer without unknown inputs reconstruction is suggested in order to achieve finite-time reconstruction of the state vector for a class of linear systems with unknown inputs. The observer is a simple one, its derivation being direct and easy. It will be shown that the problem of full-order observers for linear systems with unknown inputs can be reduced in this case to a standard one (the unknown input vector will not interfere in the observer equations). The effectiveness of the suggested design algorithm is illustrated by a numerical example (aircraft longitudinal motion), and, for the same aircraft dynamics, we make a comparison between our new observer and other already existing observers from the existence conditions and dynamic characteristics’ point of view; the superiority of the new designed observer is demonstrated.
1 October 2013 in Journal of Aerospace Engineering
This paper presents the automatic control of the aircraft in the longitudinal plane during the landing process, taking into account the wind shear and sensor errors. Two automatic landing systems (ALSs) are designed. The former uses an instrument landing system (ILS), whereas the latter controls flight altitude using the state vector. Both systems have a subsystem for the control of longitudinal velocity that is based on the dynamic inversion theory. The subsystems for pitch-angle control use proportional-derivative (PD) control laws or a law based on the dynamic inversion theory and a proportional-integral-derivative (PID) controller. The slope and flare controllers are a PD controller and a PID controller, respectively. The controllers are designed in both classical and fuzzy-logic approaches. Theoretical results are validated by numerical simulations in the absence or presence of wind shear and sensor errors. Analysis of the time evolution of the main ALS parameter leads to conclusions regardin...
11 December 2015 in Journal of Dynamic Systems, Measurement, and Control
This paper focuses on the automatic control of aircraft in the longitudinal plane, during landing, by using the linearized dynamics of aircraft, taking into consideration the wind shears and the errors of the sensors. A new robust automatic landing system (ALS) is obtained by means of the H-inf control, the dynamic inversion, an optimal observer, and two reference models providing the aircraft desired velocity and altitude. The theoretical results are validated by numerical simulations for a Boeing 747 landing; the simulation results are very good (Federal Aviation Administration (FAA) accuracy requirements for Category III are met) and show the robustness of the system even in the presence of wind shears and sensor errors. Moreover, the designed control law has the ability to reject the sensor measurement noises and wind shears with low intensity.
This paper discusses flying objects’ adaptive control with direct application to the flight of helicopters. Two new automatic adaptive control systems are suggested: the former is used for pitch angle control, while the latter is used for control of helicopter pitch angle and velocity; this second system is an extension of the first one. The adaptive control is based on the dynamic inversion principle and the use of neural networks. The two adaptive control systems have reference models, linear dynamic compensators, linear observers, and neural networks. The adaptive components of the automatic control laws compensate for the approximation errors of the dynamic model’s nonlinear functions. The used actuators are linear or nonlinear. To eliminate the neural networks’ adapting difficulties, a pseudo-control hedging (PCH) block is inserted in the adaptive system; it limits the adaptive pseudo-control by means of a component that represents the estimation error of the actuator dynamics. Thus, the PCH ...
1 May 2015 in Journal of Dynamic Systems, Measurement, and Control
The paper focuses on the dynamics and control of the nondeformable and deformable four-bar mechanism (three of the bars are mobile and one is fixed), this being a subsystem of the micromechanical flying insects' (MFIs) thorax. The control of the mechanism (six-order system described by Lagrange equations) is initially achieved by using a proportional-derivative (PD) control law, a Newton–Raphson type algorithm, and the Lyapunov theory. Because the thorax's dynamics is strongly nonlinear and is characterized by fast time varying coefficients, the PD control law cannot always guarantee small overshoot and angular rates; to overcome this drawback, over the control law PD component we superpose a neural adaptive component which compensate the error of the global nonlinearity's approximation associated to the thorax's dynamics. The two obtained control systems are validated by complex numerical simulations.