The present paper deals with some ultrasonic motors using longitudinal and bending multimode vibrators with their mode couplings caused by externally additional asymmetry or internal nonlinearity. A rectangular plate vibrator with two corners on one diagonal line cut to make its resonance modes couple with each other was used, along with a rectangular plate vibrator under the condition that two resonance frequencies are obtained, for example, as fL/fB=2.0, because internal nonlinear coupling of parametric vibration between two resonance modes is generated under this condition. Using these vibrators with mode couplings, it was found that some ultrasonic motors of simple form can be constructed. The ultrasonic motor using the phenomenon of mode-coupling vibrations dealt with here is not completely new, and a few trial constructions have already been reported [Jpn. J. Appl. Phys. 24 (1985) Suppl. 24-2, p. 739]. However, their motions were not reversible in ordinary driving with an electrical signal of a constant frequency. In contrast, the motors that the authors proposed in this paper can be expected to have a reversible motion.
1 September 1992 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Ultrasonic motors using longitudinal and torsional motions of rod vibrators have previously been proposed. Several motor constructions, whose forms are different from the previous ones, are proposed and their characteristics are experimentally examined in order to develop the ultrasonic motors of this type; that is, they are expected to have much different uses, according to how their forms are modified. Two groups of motor are dealt with: one contains motors basically suited to the relatively high torque of 2-3 kgf-cm and the other contains motors for small or medium torque below about 1.0 kgf-cm. As the result, operational characteristics of motors are totally revealed. These are useful in developing the rod type ultrasonic motors and in their practical applications.
1 July 2010 in Japanese Journal of Applied Physics
A sandwich-type multidegree-of-freedom (MDOF) spherical ultrasonic motor (SUSM) is newly proposed. The motor consists of a spherical rotor and two stator vibrators holding the rotor. This structure has both a rotor support and a preload mechanism. The stator excites five vibration modes, and the rotor can rotate on three axes. An experiment of a torque composition of two stators was carried out. The contact surface between the rotor and the stators forms a spherical surface. Moreover, a displacement magnification mechanism, which was used in the former model to rotate on theZ-axis, is no longer necessary. Hence the stator is simpler in construction than the former model. In this paper, we describe the construction and the operating principle of the MDOF ultrasonic motor, modal analysis results for the stator, and some measurement results from trial manufacturing. The miniaturization of the motor and increase in torque were successfully realized.
As an application of noncontact transportation utilizing the near-field acoustic levitation phenomenon, a rotary-type noncontact-synchronous ultrasonic motor (NCSyn-USM) using acoustic viscous force was examined. The NCSyn-USM consisted of six fan-shaped stators arranged in a circle and a flat fan-shaped rotor installed above stators via small an air gap. The possibility of the NCSyn-USM was investigated by both of numerical simulation and measurement. From the acoustic-structure and fluid-structure interaction analyzes by finite element method, the correlation between the sound pressure in the air gap and the rotational force was obtained, and it was found that the rotational force was increased by utilizing the acoustic resonance of the air gap. In the experiment, the change of rotational torque with respect to the rotor angular position approximately corresponded with analysis results. The rotation of the rotor by switching driving stators was actually obtained, so that a rotary-type NCSyn-USM would be realized.