This paper presents a robotic team suited for bottom sediment sampling and retrieval in mudflats, targeting environmental monitoring tasks. The robotic team encompasses a four-wheel-steering ground vehicle, equipped with a drilling tool designed to be able to retain wet soil, and a multi-rotor aerial vehicle for dynamic aerial imagery acquisition. On-demand aerial imagery, properly fused on an aerial mosaic, is used by remote human operators for specifying the robotic mission and supervising its execution. This is crucial for the success of an environmental monitoring study, as often it depends on human expertise to ensure the statistical significance and accuracy of the sampling procedures. Although the literature is rich on environmental monitoring sampling procedures, in mudflats, there is a gap as regards including robotic elements. This paper closes this gap by also proposing a preliminary experimental protocol tailored to exploit the capabilities offered by the robotic system. Field trials in the south bank of the river Tagus’ estuary show the ability of the robotic system to successfully extract and transport bottom sediment samples for offline analysis. The results also show the efficiency of the extraction and the benefits when compared to (conventional) human-based sampling.

Currently, there is a demand for an increase in the diversity and quality of new products reaching the consumer market. This fact imposes new challenges for different industrial sectors, including processes that integrate machine vision. Hardware acceleration and improvements in processing efficiency are becoming crucial for vision-based algorithms to follow the complexity growth of future industrial systems. This article presents a generic library of pre-processing filters for execution in field-programmable gate arrays (FPGAs) to reduce the overall image processing time in vision systems. An experimental setup based on the Zybo Z7 Pcam 5C Demo project was developed and used to validate the filters described in VHDL (VHSIC hardware description language). Finally, a comparison of the execution times using GPU and CPU platforms was performed as well as an evaluation of the integration of the current work in an industrial application. The results showed a decrease in the pre-processing time from milliseconds to nanoseconds when using FPGAs.