In the fields of industrial production or safety monitoring, wireless sensor networks are often content with unreliable and time-varying channels that are susceptible to interference. Consequently, ensuring both transmission reliability and data accuracy has garnered substantial attention in recent years. Although multipath routing-based schemes can provide transmission reliability for wireless sensor networks, achieving high data accuracy simultaneously remains challenging. To address this issue, an Energy-efficient Multipath Routing algorithm balancing data Accuracy and transmission Reliability (EMRAR) is proposed to balance the reliability and accuracy of data transmission. The multipath routing problem is formulated into a multi-objective programming problem aimed at optimizing both reliability and power consumption while adhering to data accuracy constraints. To obtain the solution of the multi-objective programming, an adaptive artificial immune algorithm is employed, in which the antibody initialization method, antibody incentive calculation method, and immune operation are improved, especially for the multipath routing scheme. Simulation results show that the EMRAR algorithm effectively balances data accuracy and transmission reliability while also saving energy when compared to existing algorithms.
19 June 2023 in IEEE Transactions on Industrial Electronics
In the dual-inertia servo system, the servo resonance in which the characteristics are closely related to the mechanical parameters is usually suppressed by adding a notch filter. As a result, accurate mechanical parameter identification facilitates adjusting the notch parameters and avoiding the failed servo resonance suppression caused by the mechanical parameter mismatch. In this article, a topological structure expanded by five improved sliding-mode observers (ISMOs) is proposed to simultaneously identify the load speed, the motor inertia, the load inertia, the stiffness coefficient, and the load disturbance, where the load speed and the load disturbance are considered as intermediate variables to provide sufficient load-side information to ensure the identification accuracy of the mechanical parameters. Furthermore, according to the natural knowledge of the dual-inertia servo system, a time-varying interconnected gain with an equal derivative to the identification parameter in each ISMO is designed to promote the global convergence of the topological structure. Finally, the identified mechanical parameters are utilized to adjust the notch parameters for the servo resonance suppression. Simulation and experimental results are presented to indicate the superiority of the topological structure and the effectiveness of the servo resonance suppression.
8 August 2023 in IEEE Transactions on Power Electronics
Reducing the system order and requiring precise knowledge of the system states and mechanical parameters are of crucial significance for suppressing the mechanical resonance of double-inertia servo systems. Committed to this work, both an extended active resonance suppression (EARS) scheme and a dual-layer network using five improved sliding-mode observers (ISMOs) are presented in this paper. An integral-proportional controller with two feedback loops as well as two feedforward items is developed for facilitating our EARS structure to suppress the mechanical resonance more thoroughly. Interestingly, based on the pole-zero cancellation, two adapting factors concerning two feedforward items are ingeniously exploited for diminishing the system order to improve the dynamic response and the system stability. Furthermore, for the zero-point shift phenomenon, our EARS scheme can cope with it instinctively. In the dual-layer network, an inline gain with a reaching law in each ISMO is designed to make the identification parameters converge exponentially to their actual values. It is worth noting that the reaching law, consisting of a convergent factor and a chattering-suppression factor, enables to adjust the convergent rate with independent-adaption suppression of the sliding-mode chatter. Abundant simulations and experimental results are rendered to verify the viability.