Conservation of ancient wooden artifacts, in addition to consolidation advantage, prevent its deterioration over time. In this research, silane consolidants, including methyltrimethoxysilane (MTMS) and 3-mercaptopropyltrimethoxysilane (MPTMS) with 25 wt% in ethanol were applied under controlled conditions on modeled birch wood (Betula pendula) as a conservation strategy for archeological woods in terrestrial environments. While the wood samples were gradually saturated and dried, aesthetics and cell-walls integrity were also considered. The leaching characteristics, visual and physical changes of wood specimens were evaluated during 4 aging periods to assess their performance and stability. Morphological and chemical reactions were analyzed by FE-SEM microscopy and ATR-FTIR spectroscopy, respectively. For comparison, antifungal properties and thermogravimetric analysis (TGA, DTG) were also examined on the samples. As results, silanization reduced the wood-water interactions while maintaining the aesthetic properties, especially with MPTMS. Maximum water-repellency of silane-treated woods were achieved after a water post-treatment, which probably indicates the secondary hydrolysis of silanes in the presence of water and their re-polymerization. Biological-durability testing (according to EN 113-2) of birch wood (not-durable), against Basidiomycete fungi (i.e., Trametes versicolor and Gloeophyllum trabeum) showed ~ 90% (very-durable) and ~ 65% (moderately-durable) efficiency for MPTMS- and MTMS-treated wood respectively. Based on FTIR and TGA analysis, more interactions of MPTMS with lignin was found, which is more consistent with the chemical nature of most archaeological woods. Thermal-stability and low hygroscopicity of silane-reinforced woods were also confirmed by TGA/DTG, indicating high conservation potential of silanes for historical woods. Meanwhile, a complementary study on real ancient samples is recommended.
16 June 2025 in Journal of Coatings Technology and Research
The surface performance and weathering resistance of wood products often depend on the applied coating and reinforcing additives. In this paper, polyester film with the contribution of ceramic nanoparticles (contains zinc oxide, ZnO) was deposited on the oak wood ( Quercus castaneifolia ) surfaces via atmospheric pressure plasma jet (APPJ) technology. The polyester coating applied with an applicator and uncoated wood samples served as controls. The surface properties such as surface roughness, contact angle, wear index, wear depth and hardness values of the samples were analyzed before and after 720-h exposure to the artificial accelerated weathering test. The results demonstrated that the surface properties of oak samples were considerably improved after coating, and superior performances were observed in the plasma-deposited coating layer, particularly the ones reinforced with ceramic nanoparticles. This indicates a potential for using the plasma deposition method for coating and enhancing the surface properties of wood.
Driven by environmental concerns, the packaging industry is shifting toward high-performance and bio-based coating alternatives. In this research, poly(methylmethacrylate) (PMMA) and modified cellulose nanocrystal (m-CNC) were employed as reinforcing agents to develop sustainable poly (lactic acid)-based coatings for packaging applications. Various formulations, influenced by polymer matrix blends and m-CNC loadings (1–5%), were prepared using solvent and applied as protective coating on cardboard paper substrates. The grammage of polymeric coatings (CG) on paper was also investigated using various wet film thicknesses (i.e., 150–250 μm). Accordingly, key parameters including water contact angle, thermal behavior, mechanical performances and barrier properties were systematically evaluated to assess the effectiveness of the developed nanocomposite coatings. As a result, nonylphenol ethoxylate surfactant-modified cellulose nanocrystals exhibited good dispersion and stable suspension in chloroform for one hour, improving compatibility and interaction of polymer–CNC fillers. The water vapor permeability (WVP) of PLA-coated papers was significantly reduced by blending PMMA and increasing the content of m-CNC nanofillers. Furthermore, CNC incorporation enhanced the oil resistance of PLA/PMMA-coated cardboard. Pronounced improvements in barrier properties were observed for paper substrates coated with dry coat weight or CG of ~20 g/m2 (corresponding to 250 μm wet film thickness). Coatings based on blended polymer—particularly those reinforced with nanofillers—markedly enhanced the hydrophobicity of the cardboard papers. SEM-microscopy confirmed the structural integrity and morphology of the nanocomposite coatings. Regarding mechanical properties, the upgraded nanocomposite copolymer (PLA-75%/PMMA-25%/m-CNC3%) exhibited the highest bending test and tensile strength, achieved on coated papers and free-standing polymeric films, respectively. Based on DSC analysis, the thermal characteristics of the PLA matrix were influenced to some extent by the presence of PMMA and m-CNC. Overall, PLA/PMMA blends with an optimal amount of CNC nanofillers offer promising sustainable coatings for the packaging applications.