A modified indoor path loss prediction model is presented, namely, effective wall loss model. The modified model is compared to other indoor path loss prediction models using simulation data and real‐time measurements. Different operating frequencies and antenna polarizations are considered to verify the observations. In the simulation part, effective wall loss model shows the best performance among other models as it outperforms 2 times the dual‐slope model, which is the second best performance. Similar observations were recorded from the experimental results. Linear attenuation and one‐slope models have similar behavior, the two models parameters show dependency on operating frequency and antenna polarization.

This paper introduces a study on verifying received power at WLAN frequencies in indoor environments, Wireless InSite is a popular electromagnetic ray-tracing software which is widely used for predicting channel behaviour in indoor and outdoor environments. The study compares software-generated data with measurements collected through 3rd floor Chesham Building, University of Bradford, at WLAN frequencies, the paper also investigates the effect of changing settings on results accuracy and computational time, and finally, the paper presents a comparison between simulation results with empirical models.

A comprehensive study of approaches to estimation of the local average of the received signal strength (RSS) for indoor multipath propagation is presented. The effects of the required number of RSS data samples and the Euclidean distances between neighbouring samples are investigated over 1D, 2D and 3D configurations. It was found that the effect of fast fading was reduced to an acceptable level using a 2D horizontal arrangement with a relatively large spacing configuration. Further, averaging was enhanced with larger spacing compared to small spacing, when considering the same number of samples.

This paper outlines a study of the effect of changing the electrical properties of materials when applied in the Wireless InSite (WI) ray-tracing software. The study was performed at 60 GHz in an indoor propagation environment and supported by Line of Sight (LoS) and Non-LoS measurements data. The study also investigates other factors that may affect the WI sensitivity, including antenna dimensions, antenna pattern, and accuracy of the environment design. In the experiment, single and double reflections from concrete walls and wooden doors are analysed. Experimental results were compared to those obtained from simulation using the WI. It was found that materials selected from the literature should be similar to those of the environment under study in order to have accurate results. WI was found to have an acceptable performance provided certain conditions are met.