The top-cover of a conventional differential scanning calorimeter (DSC) was modified to accommodate two custom-made fibre-optic probes. The function of the probes was to illuminate the sample and reference compartments of the DSC and to return the reflected light from the DSC pans to a fibre-coupled Fourier transform near-infrared (FTIR) spectrometer. The cross-linking kinetics of a commercially available epoxy/amine resin system were studied using the conventional and modified DSC along with conventional transmission FTIR spectroscopy. The cross-linking kinetics and the activation energies for the epoxy/amine resin system obtained via the conventional DSC and simultaneous DSC/FTIR were similar (60.22–60.97 kJ mol−1). However, the activation energy obtained for the cuvette-based conventional transmission FTIR experiments was found to be lower (54.66 kJ mol−1). This may be attributed to the temperature-control attained within the cuvette holder. The feasibility of using a simple fibre-optic probe to link the DSC to the FTIR spectrometer was demonstrated
We report a novel frequency multiplexing method for addressing low finesse fiber Fabry–Perot sensors using a white light source and a CCD based monochromator. The absolute optical path length imbalance of the sensors can be determined using this method. The concept was demonstrated with three fiber Fabry–Perot interferometers for strain and displacement measurements. The accuracy is better than 0.01 μm and the maximum range is approximately 1 mm.