The understanding of compositional characteristics permits to predict the efficient thermal conversion technologies and Higher Heating Value (HHV). Although HHV can be determined directly, many models have been proposed for HHV prediction. They are based on proximate, ultimate, and structural analysis and require much data collected. The present work assesses to predict efficient thermal conversion technologies and HHV of the most abundant agricultural biomass from Cameroon, namely cassava peelings, plantain peelings, and corn cobs, by using the existing models and exploring the calculation of HHV from the formula. The results show that investigated biomasses can be efficiently used in thermochemical conversion to produce bio-oil/syngas, in the biochemical process to produce bioethanol/biogas, and in the physical process to densify feedstock into fuel briquette. Flue gas reveals a value less than the toxic values fixed by the European standard for household waste incineration and can therefore be used as an environmentally friendly bioenergy source. Nevertheless, the levels of S and N could be taken into account in the design of a gasification plant to control the emission of NO2 and SOx-derived pollutants as their value is more than the limit fixed. Amongst the existing models, the model based on ultimate analysis gives the best correlation. The Average Absolute Error (AAE) is ranging from 2.47 to 10.71%. The calculation of HHV from combustion enthalpy and the formulae of cassava peelings, plantain peelings, and corn cob are C5H4O2, C5H8O4, and C3H4O2 respectively. The HHV derived from them is 16.13, 16.27, and 20.02 MJ/kg for cassava peelings, plantain peelings, and corn cob respectively. The AAE lies within 2.52 and 8.08%. These values are lower than those obtained from the literature models. These AAE varies between 4 and 10%. The AAE of the twenty biomasses from the literature ranges from 0.16 to 10.96%.
1 January 2024 in European Journal of Engineering and Technology Research
This work focuses on the evaluation of the energy potential of cotton shells from SODECOTON and to predict suitable thermal conversion conditions. To achieve this goal, structural and proximate analyses were performed, while ultimate analysis, flue gas and higher heating value were calculated from models. This study reveals that cotton shells highly contain cellulose, volatile matter, lignin and carbon, which make it suitable for bioethanol, bio-oil/syngas and biochar production via biochemical and thermochemical technologies as well as fuel briquette. Heating value from cotton shell ranging from 17 MJ/kg to 19 MJ/kg, is set in the interval to be used as fuel. From the results, the value of flue gas is within acceptable limits and the pollutant emissions are less than the values of regulated threshold set. The energy potential released is around 1.30 GJ per year, 1.58 × 107 Nm3/year, 1.62 × 104 m3/year, 15.21 × E6 L and 26 × E6 L for annual combustion energy, syngas, methane, bioethanol and bio oil, respectively. Amongst them combustion via fuel briquette is suitable for less developing country such as Cameroon thus, it could supply 40% of cooking energy consumption in Garoua center town and can improve environmental sustainability in company.
4 September 2024 in Sustainable Chemical Engineering
The depletion of fossil fuels, the pollutant related, insecure supply chain of biomass and the increasing energy price lead to finding alternative energy sources. The goal of this study was to optimize bioethanol production from cattle manure and to estimate the theoretical bioethanol potential. To achieve this goal, both acid/alkaline pretreatments and hydrolysis steps were optimized using H2SO4 and NaOH. A centered central composite design was used for acid pretreatment optimization and a central composite design was applied for alkaline pretreatment and diluted acid hydrolysis with respect to physico-chemical parameters. The existing kinetic models were used to estimate bioethanol potential and to follow the degradation of macromolecules to bioethanol. The alkaline pretreatment offered 35% as the highest cellulose content for the time of 5 h and the NaOH concentration ranged between 2 M to 2.3 M. Meanwhile, the highest phenolic compound was 800 mg/100 g for time varying between 3.7 h-5 h and NaOH concentration ranged from 1.3 M to 2 M. The acid pretreatment revealed that the optimum area reached 45.5% sugar-free for acid concentration between 3.5 M and 4 M and time ranged from 9 min to 10 min. The results from acid hydrolysis pointed out that the maximum value of sugar-free was 78% for time ranging from 1.9 h and 2 h and the sulfuric acid concentration between 2.9 M and 3.0 M. The amount of cellulose per year was estimated at 593,271 t/year and the amount of bioethanol potential was evaluated at 461,433,000 L/year. The kinetic hydrolysis model based on sulfuric acid concentration showed that the maximum time of hydrolysis and the cellulose decreased when the temperature increased while the quantity of glucose followed the evolution of the temperature. Hence, temperature plays a very important role during the hydrolysis of cellulose. The satisfactory results obtained from this work display that, the production of bioethanol from cattle manure could permit improved environmental sustainability.