A new two-step method for developing a nanocomposite of polypropylene (PP) decorated with photocatalytically active TiO2 nanoparticles (nTiO2) is proposed. This method involves the low-temperature plasma functionalization of polypropylene followed by the ultrasound-assisted anchoring of nTiO2. The nanoparticles, polymeric substrate, and resultant nanocomposite were thoroughly characterized using nanoparticle tracking analysis (NTA), microscopic observations (SEM, TEM, and EDX), spectroscopic investigations (XPS and FTIR), thermogravimetric analysis (TG/DTA), and water contact angle (WCA) measurements. The photocatalytic activity of the nanocomposites was evaluated through the degradation of methyl orange. The individual TiO2 nanoparticles ranged from 2 to 6 nm in size. The oxygen plasma treatment of PP generated surface functional groups (mainly -OH and -C=O), transforming the surface from hydrophobic to hydrophilic, which facilitated the efficient deposition of nTiO2. Optimized plasma treatment and sonochemical deposition parameters resulted in an active photocatalytic nTiO2/PP system, degrading 80% of the methyl orange under UVA irradiation in 200 min. The proposed approach is considered versatile for the functionalization of polymeric materials with photoactive nanoparticles and, in a broader perspective, can be utilized for the fabrication of self-cleaning surfaces.
The modular photoelectrochemical (PEC) reactor accommodating eight photoelectrodes with a total active area of up to 46 cm2 has been designed and manufactured using the fused deposition modeling method. The device was equipped with an electrolyte flow system, a relay module for the photoelectrode connection, and a feedback-loop module for switching between counter electrodes. The performance and durability of the system were tested within three case study experiments. The water splitting process was successfully combined with an in situ hydrogen storage in the form of metal hydride phases (confirmed by powder X-ray diffraction) using Fe2O3- or WO3-based photoanodes and LaNi5-based cathodes. The PEC water oxidation at the anodes was realized either in a strongly alkaline electrolyte (pH > 13.5) or in acidified synthetic seawater (pH < 2) for Fe2O3 and WO3 electrodes, respectively. In the latter case, the photoresponse of the anodes decreased the cell charging voltage by 1.7 V at the current density of 60 mA∙g−1. When the seawater was used as an anolyte, the oxygen evolution reaction was accompanied by the chlorine evolution reaction. The manufactured PEC-metal hydride reactor revealed mechanical and chemical stability during a prolonged operation over 300 h and in the broad range of pH values.
A new two-step method for developing a nanocomposite of polypropylene (PP) decorated with photocatalytically active TiO2 nanoparticles (nTiO2) is proposed. This method involves low-temperature plasma functionalization of polypropylene followed by ultrasound-assisted anchoring of nTiO2. The nanoparticles, polymeric substrate, and resultant nanocomposite were thoroughly characterized using nanoparticle tracking analysis (NTA), microscopic observations (SEM, TEM, EDX), spectroscopic investigations (XPS, FTIR), thermogravimetric analysis (TG/DTA), and water contact angle (WCA) measurements. The photocatalytic activity of the nanocomposites was evaluated through the degradation of methyl orange. The individual TiO2 nanoparticles ranged from 2-6 nm in size. Oxygen plasma treatment of PP generated surface functional groups (mainly -OH and -C=O), transforming the surface from hydrophobic to hydrophilic, which facilitated efficient deposition of nTiO2. Optimized plasma treatment and sonochemical deposition parameters resulted in an active photocatalytic nTiO2/PP system, degrading 80% of methyl orange under UVA irradiation in 200 minutes. The proposed approach is considered versatile for the functionalization of polymeric materials with photoactive nanoparticles and, in a broader perspective, can be utilized for the fabrication of self-cleaning surfaces.