Fatigue cracks at rivet holes occur at advanced service life of aircrafts due to cyclic loading. As a repair method, adhesively bonded stiffener patches enhance the fatigue life of the structure by delaying crack initiation and reducing crack growth. Combining a crack sensor with a repair patch to a sensor‐based stiffener patch allows crack growth reduction and monitoring at the same time. This paper presents a feasibility study on the integration of eddy current sensors into carbon fibre reinforced plastic (CFRP) repair patches. To this end, a specific patch design is developed, and samples are manufactured by ultrasonic fabrication. The performance of the patches is investigated in fatigue tests in terms of ‘crack reinforcement’ and ‘crack detection.’ Both requirements are met. The undertaking of future efforts to tailor the sensor‐based repair patch concept to an individual application in aircraft maintenance seems reasonable.
Experimentable Digital Twins are capable of combining different simulation domains on a system level. This has been shown for a multitude of simulation domains, e.g., rigid body dynamics, control, sensors, kinematics, etc., and application scenarios, e.g., automotive, space, and industrial engineering. In our work, we investigate how to include structural loads into an Experimentable Digital Twin while maintaining computational efficiency and interoperability on a system level. We combine rigid body dynamics with the transfer matrix method to simulate forces and stresses. We show our approach for statically determinate beam structures in a simulation on a system level and validate it experimentally and numerically with static and dynamic example problems. The results show a strong agreement in these comparisons, confirming the accuracy and reliability of our method. For practical applications, we see force and stress simulation using the transfer matrix method as an additional tool to facilitate simulation-based engineering in the early stages of structural design processes, e.g., when dealing with uncertain loading conditions and operational complexity on a system level.
The forestry sector in central Europe aims for a fully mechanized wood harvest. This goal is currently restricted by the limited reach of forest harvesters on the market and legislative specifications on the distance between skid trails. As a consortium of industry and academia, we are developing a novel forestry machine that is designed to fell and skid trees in the inter-field between skid trails and which is equipped with a lightweight boom for an extended reach; to date, felling in the inter-field is not reachable for harvesters and is done in manual labor. As a key risk, overturning the whole forestry vehicle prevents a transfer of current harvester designs to an extended reach. To avoid overturning, we apply a consequent lightweight design for the boom of the new forestry machine. The development of the forestry vehicle will be supported by a versatile use of Experimentable Digital Twins (EDT), which are one promising concept to push the idea of Digital Twins into practice. The EDT allows for interaction in a pure virtual or in a hybrid environment. The tasks of EDT in the context of the new forestry machine will include a virtual prototype in the development phase, a driver assistance system in the operational phase, and a central hub for a strain-based monitoring system in the operational phase. This contribution gives an insight into our present work on the EDT of the novel forestry machine, emphasizing the load monitoring system of the lightweight boom. On a conceptual level, we present the load monitoring system, addressing the challenges specific to this application. We outline the proposed strain sensor distribution and describe the interaction with the EDT.