The isolated working face is significantly impacted by the adjacent goaf and the mining activities of the working face itself, causing the overlying rock layers above the working face to exhibit far more intense activity compared to an ordinary working face. The stress levels are high, and the surrounding rock suffers severe damage, posing serious challenges to the safe and efficient extraction of the working face. Improving the service life of the retreating roadway in an isolated working face is a pressing technical issue that coal mining companies must address. Focusing on the characteristics of the strata and mining conditions of the 8213 isolated working face in the Yanjiahe Coal Mine, which features a three-soft coal seam, a combination of field investigation, theoretical analysis, on-site monitoring, and numerical simulation methods was employed. This approach aimed to analyze the fundamental laws of mine pressure behavior in the three-soft coal seam isolated working face as well as the deformation and failure mechanisms of the surrounding rock in the retreating roadway. Using elastic thin plate theory, it was determined that the basic roof periodic fracture step of the 8213 isolated face in the Yanjiahe Coal Mine is approximately 23 m. Field mine pressure monitoring on the 8213 isolated working face revealed that during non-periodic pressure events, the support resistance of the working face generally fluctuated stably below the rated working resistance. When the basic roof collapsed, the average working resistance of the support showed a significant increase with periodic pressure steps ranging from 16 to 27 m and an average of 22 m. Numerical simulations were further used to analyze the changes in stress and the plastic zone of the overlying rock on the 8213 isolated working face, clarifying the mechanism by which instability in the overlying rock structure leads to incidents. This analysis provides theoretical support for the safe mining of isolated working faces.

Water inrush from separation layers is a special type of water inrush disaster that occurs during coal mining. It is characterized by the absence of precursors before the inrush, a sudden and massive influx of water, strong destructive power, and significant difficulty in prevention and control. This disaster causes substantial economic losses and casualties in mines. To study the dynamic evolution characteristics of the overlying rock strata in Guojiahe coal mine, field investigations, theoretical analysis, physical simulations, and numerical simulations were conducted. The development state of the overlying rock strata and the height of the water-conducting fractures in the 1304 working face during continuous mining were analyzed, and the spatial position of the strata where water hazards could form was determined. Through theoretical calculations, the height of the water-conducting fracture zone was found to be approximately 205 m, forming a water-storable separation space about 248 m above the coal seam roof. A physical similarity model was constructed to study the development state of overlying rock strata separation in the 1304 working face. Experimental results indicate that, as the working face advances, the rock strata gradually develop lateral separation spaces from bottom to top, and vertical fractures increase progressively in a similar manner. The spaces and fractures formed in the early stages of the working face advance gradually close and form a compaction zone. However, new fractures develop near the working face side. As mining continues, the asynchronous movement of the overlying rock promotes the development of vertical fractures, providing water-conducting channels for water inrush from the separation. Based on numerical simulation analysis of the development state of overlying rock strata separation and the height of the water-conducting fracture zone, it can be concluded that the water-storable separation space develops between the 8th layer of the formation of sandy mudstone and the 9th layer of the Yijun Formation conglomerate, which is 248 m from the coal seam roof. When excavated to 280 m, the separation space reaches its maximum, with a width of about 19 m and a height of about 1.2 m, and the water storage capacity increases to its maximum. The height of the water-conducting fracture zone eventually increases to 202 m.