Ke Tan

Mr. Ke Tan


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 March 2023 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
CWChong Wu
Chong Wu
TJTang Jing
Tang Jing
BTBo Tao
Bo Tao
KTKe Tan
Ke Tan
ZGZhenfeng Gu
Zhenfeng Gu
ZYZhouping Yin
Zhouping Yin
In this article, we propose an RFID-based simultaneous localization and mapping (RF-SLAM) method that allows us, for the first time, to estimate the robot's position and the tags’ 3D position in the warehouse environment simultaneously without any reference tags and external sensors, using only COTS RFID device. RF-SLAM is designed to transform the RFID measurement into the relative tag position constraint and use a corresponding graph based model to solve the SLAM problem. Specifically, a multiantenna-based relative localization method using phase measurement and odometer data in a short time is proposed as the front end. The back end is a novel graph model based on the relative tags position constraint and odometer constraint. Experiments in different types of warehouses show the localization accuracy of robot and tags’ 3D position is about 5 cm and 10 cm, respectively. The experimental results in a more challenging and actual environment are still competitive.

23 February 2024 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
YSYing Shi
Ying Shi
TJTang Jing
Tang Jing
BTBo Tao
Bo Tao
KLKeyi Li
Keyi Li
ZGZhenfeng Gu
Zhenfeng Gu
Han DingHan Ding
Han Ding
This article proposes a climbing machining robot that can adsorb and move on the variable curvature surface of large and complex components to perform machining tasks. Active compliance suction units, which consist of twofold innovation, are proposed for this robot to overcome the bottleneck involving adsorption on the variable curvature surface. To solve the dilemma between high vacuum tolerance and surface compliance capability, we designed a novel trachea-inspired anisotropic stiffness sealing lip for the suction chamber, and it showed flexibility in the adsorption direction for adoption to complex surfaces and presented a high stiffness that can withstand large vacuum forces at its sides. Furthermore, to avoid vacuum leaks due to overstretching and overcompressing of the sealing lip, we developed an active compliance actuator to align the axis direction of the suction chamber with the normal direction of the adsorbed surface and maintain a suitable distance. To meeting strict weight and dimension demands, the actuator innovatively combines cable-driven units and 3-revolute-revolute-spherical parallel mechanism to reach a high load/weight ratio. The prototype of the climbing machining robot was developed and tested on a real large wind-turbine blade with variable curvatures ranging from 1 to 15 m. The experimental results show that the 10 kg-weight climbing machining robot with three ACSUs can provide over 1000 N adsorption force in total, and the fluctuation of adsorption forces can be reduced by 96% compared with that of robots with traditional pure passive compliance suction units. A comparative polishing experiment was executed on different curvature regions of the wind turbine blade, and the results prove that the proposed method can apply uniform polishing. In addition, a polishing-quality verification experiment was realized using the proposed climbing machining robot with a force-controlled polisher. These polishing experiments proved the machining capability of the proposed climbing robot.

1 June 2022 in Annals of Palliative Medicine
Verified
Journal Article
Open access
PDF file
QHQi Hao
Qi Hao
QDQi Ding
Qi Ding
YHYang Hao
Yang Hao
KTKe Tan
Ke Tan
ZWZhi-Hui Wang
Zhi-Hui Wang
LYLin Yang
Lin Yang
Background: Cervical spondylotic myelopathy (CSM) is a common cause of neurological morbidity, which can have an impact on quality of life. Symptomatic postoperative spinal epidural hematoma (SPSEH) is a rare condition, but can cause permanent neurological deficits and disability if not managed properly. However, there are limited studies on the outcomes of SPSEH after anterior cervical discectomy and fusion (ACDF) and anterior cervical corpectomy and fusion (ACCF) were performed for 2-level CSM. Therefore, the aim of the present study was to compare the clinical outcomes and incidence of SPSEH after ACDF compared with SPSEH after anterior cervical corpectomy and ACCF for 2-level CSM to reduce surgical complications of 2 level CSM. Methods: A total of 551 patients (261 males and 290 females) who underwent ACDF or ACCF for 2-level CSM from January 2009 to February 2015 were retrospectively reviewed. Preoperative indexes (age, sex, body mass index, bone mineral density, preoperative coagulation, and past medical history), perioperative indexes (length of hospital admission, blood loss, and operation times), preoperative and postoperative neurological statuses, complications, fusion rate, and the SPSEH incidence for ACDF or ACCF were compared simultaneously. Results: With the exception of blood loss (P<0.001), no significant differences were observed between the 2 groups in terms of sex, prothrombin time, activated partial thromboplastin time, platelet count, length of hospital admission, operation time, the final follow-up Japanese Orthopedic Association score, visual analog scale score, fusion rate, and complications. The overall incidence rate for SPSEH after ACDF was 1.9%, while the rate for SPSEH after ACCF was 0.4%. Following hematoma removal, only one patient showed any improvement in neurological function, despite treatment with hyperbaric oxygen and neurotrophic drugs. Conclusions: The findings indicated that surgical management of 2-level CSM using ACDF or ACCF showed similar clinical outcomes, fusion rate, complications, and perioperative parameters, with the exception of blood loss. However, SPSEH preferentially occurs after surgery with ACDF. Therefore, whether ACCF surgery for 2-stage CSM is the superior treatment modality.

19 December 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
KTKe Tan
Ke Tan
TJTang Jing
Tang Jing
BTBo Tao
Bo Tao
YZYuhao Zhang
Yuhao Zhang
XLXiaoshun Liu
Xiaoshun Liu
Han DingHan Ding
Han Ding
Wheeled climbing robots equipped with tools can achieve high-coverage machining of large components with free-form surfaces. Trajectory tracking is the foundation for machining. However, there is a lack of a universal yet accurate model for robots while moving on variable curvature surfaces, making it difficult to guarantee tracking performance. Thus, this article proposes a universal contact frame based on differential geometry and establishes a kinematics model that uses surface parameters as state variables for robots moving on variable curvature surfaces. Based on this model, a tracking controller utilizing surface parameters error is then designed, enabling it to be applicable for tracking of climbing robots on free-form surfaces. Experiments with a wheeled climbing robot on a portion of a real wind turbine blade with a radius of more than 1.1 m demonstrate the effectiveness of the proposed method, with a root mean squared error (RMSE) of tracking accuracy of less than 1 mm.

20 January 2025 in IEEE Transactions on Automation Science and Engineering
Verified
Journal Article
Closed access
KTKe Tan
Ke Tan
TJTang Jing
Tang Jing
BTBo Tao
Bo Tao
YZYuhao Zhang
Yuhao Zhang
YSYing Shi
Ying Shi
Han DingHan Ding
Han Ding
Wheeled climbing robots have great application prospects in the machining of large components with variable curvature. However, its accurate motion control on variable curvature surfaces faces two fatal challenges. The varied contact states between the robot’s wheels and the variable curvature surfaces make it difficult to establish an accurate kinematics model. Additionally, there exists a different degree of robot slippage when the robot moves in different attitudes due to the dragging effect of gravity. To overcome the above problems, we first present a kinematics modeling method with instantaneous plane constraints on a variable curvature surface. Subsequently, a linear extended state observer (LESO)-based nonlinear model predictive control (NMPC) scheme is designed, in which the NMPC is used to calculate the nominal control inputs and the LESO is used to estimate and compensate for lumped disturbance brought by the robot slippage and surface constraints. Experiments on a real wind turbine blade with variable curvature show that the proposed control scheme can well eliminate the influence of lumped disturbance, and the climbing robots can achieve unbiased (AVG < 0.1 mm) and high-precision (RMSE < 2 mm) trajectory tracking. provides a solution for automatic and high-precision trajectory tracking for climbing robot with localization system in factories, offering the potential for high-quality machining of large components.

6 August 2024 in Machines
Verified
Journal Article
Open access
PDF file
MLMeifeng Lv
Meifeng Lv
XLXiaoshun Liu
Xiaoshun Liu
LXLei Xue
Lei Xue
KTKe Tan
Ke Tan
JHJunhui Huang
Junhui Huang
TJTang Jing
Tang Jing
Climbing robots, with their expansive workspace and flexible deployment modes, have the potential to revolutionize the manufacturing processes of large and complex components. Given that the surfaces to be machined typically exhibit variable curvature, good surface adaptability, load capacity, and motion accuracy are essential prerequisites for climbing robots in manufacturing tasks. This paper addresses the manufacturing requirements of climbing robots by proposing an asymmetric independently steerable wheel (AISW) for climbing robots, along with the motion control method. Firstly, for the adaptability issue of the locomotion mechanism on curved surfaces under heavy load, an asymmetric independently steerable wheel motion module is proposed, which improves the steering difficulty of the traditional independently steerable wheel (ISW) based on the principle of steering assisted by wheels. Secondly, a kinematic model of the AISW chassis is established and, on this basis, a trajectory tracking method based on feedforward and proportional–integral feedback is proposed. Comparative experimental results on large, curved surface components show that the asymmetric independently steerable wheel has lower steering resistance and higher motion accuracy, significantly enhancing the reachability of climbing robots and facilitating their application in the manufacturing of large and complex components.