Biopolymer/inorganic material nanocomposites have attracted increasing interest as nanocarriers for delivering drugs owing to the combined advantages of both biopolymer and inorganic materials. Here, amphiphilic block copolymer/fullerene nanocomposites were prepared as nanocarriers for hydrophobic drug by incorporation of C60 in the core of methoxy polyethylene glycol-poly(d,l-lactic acid) (MPEG-PDLLA) micelles. The structure and morphology of MPEG-PDLLA/C60 nanocomposites were characterized using transmission electron microscopy, dynamic light scattering, high-resolution transmission electron microscopy, and thermal gravimetric analysis. It was found that the moderate amount of spherical C60 incorporated in the MPEG-PDLLA micelles may cause an increase in the molecular chain space of PDLLA segments in the vicinity of C60 and, thus, produce a larger cargo space to increase drug entrapment and accelerate the drug release from nanocomposites. Furthermore, sufficient additions of C60 perhaps resulted in an aggregation of C60 within the micelles that decreased the drug entrapment and produced a steric hindrance for DOX released from the nanocomposites. The results obtained provide fundamental insights into the understanding of the role of C60 in adjusting the drug loading and release of amphiphilic copolymer micelles and further demonstrate the future potential of the MPEG-PDLLA/C60 nanocomposites used as nanocarriers for controlled drug-delivery applications.
The cooperative self-assembly of nanoparticles and amphiphilic block copolymers has attracted increasing interests as it offers effective routes to achieve nanocomposite supramolecular structures with desired structure and properties. The incorporation of nanoparticles usually tunes the self-assembly structure of block copolymers, as the copolymer–nanoparticle interactions may change the relative volume ratio of hydrophobic block/hydrophilic block copolymers. It should be noted that the micro-size length and the strong nonpolar feature of carbon nanotubes (CNTs) may cause the block copolymer–CNT interactions to differ from the the block copolymer–nanoparticle interactions. Herein, we show that the diameter of CNTs and the copolymer/CNT ratio have a profound effect on the self-assembly behavior of amphiphilic block copolymers. Upon the addition of carboxylated multi-walled carbon nanotubes (c-MWCNTs, diameter <8 nm,) to the methoxy polyethylene glycol-poly (D,L-lactic acid) (MPEG-PDLLA) solution, it is difficult to observe the c-MWCNTs directly in TEM images. However, it has been found that they form supramolecular nanocomposite structures with MPEG-PDLLA. Moreover, these supramolecular structures transform from core–shell spherical micelles into rod-like micelles and then into large composite aggregates with the increase of the c-MWCNT addition. However, in the case of the addition of c-MWCNTs with a diameter of 30–50 nm, the dispersed c-MWCNTs and spherical core–shell micelles could be observed simultaneously in the TEM images at a low c-MWCNT addition, and then the micelle structure disappeared and only well-dispersed c-MWNTs were observed in TEM images at a high c-MWCNT addition. A possible model was proposed to explain the rule of CNTs participating in the formation of copolymer/CNT nanocomposite structures. It was also shown that as-prepared copolymer/CNT supramolecular nanocomposites could be used as drug carriers, enabling the adjustment of the drug loading and release time.
1 October 2019 in Journal of Biobased Materials and Bioenergy
In recent years, polyethylene glycol-polylactic acid (PEG-PLA) block copolymers consisting of hydrophilic and hydrophobic segments have been extensively used to prepare drug carriers. The PEG-PLA can self-assemble in water to form aggregates of various structures, including spherical/worm-like/linear/rod-like micelles and polymersomes. These PEG-PLA self-assembled structures could be uses as drug-carries having the advantages of good biocompatibility, prolonged blood circulation time, favorable biodistribution and low drug toxicity. The drug release behavior of block copolymer carries could be easily adjusted by controlling the molar ratio of two segments and the relative molecular weight of the copolymer. Generally, PEG-PLA block copolymer with lower molecular weight and higher PEG content has better hydrophilicity and faster drug release rate while block copolymer with higher molecular weight and higher PLA content has lower solubility in water. A challenge in drug carries is the ability to control the delivery of a drug to a desired (or target) site. The mPEG-terminated methyl groups of mPEG-PLA block copolymers are chemically stable and lack of reactivity, which makes it difficult to bind to specific ligands with targeting function. Therefore, the end-group functionalization of PEG-PLA is a key to realize the full potential of targeted drug delivery and endow drug carries with higher therapeutic efficacy and lower toxicity. In this paper, the methods of end-group functionalization of PEG-PLA were summarized and the functionalization applications in the field of drug carriers were also discussed. It is expected that the application of PEG-PLA as drug carriers can provide more means and possibilities for clinical treatment of diseases.
Epoxy/polyamic acid (EP/PAA) adhesives with high polyimide precursor-PAA content have been synthesized and then cured. The structure, thermal, and adhesive properties were investigated by Fourier transform infrared spectroscopy, thermogravimetric analysis, and tensile shear test. The effects of PAA content and curing process on the tensile shear strength were also studied. The results showed that the addition of PAA improved the heat resistance and reduced the water absorption. EP/PAA adhesive kept good adhesion. A kind of EP/PAA composite adhesive with excellent comprehensive properties was prepared in this study.
Polymer dielectric films have extensive applications in power systems, pulse power systems, hybrid vehicles, and clean energy. However, with advancements in energy storage technology and increasingly demanding operating environments, particularly under high-temperature conditions, their utility is constrained by the low dielectric constant and significantly increased leakage current density at high temperatures. Polyimide (PI), an excellent high-temperature-resistant polymer, has gained prominence in high-temperature energy storage. In this work, a high-dielectric polyimide incorporating high-polarity sulfonyl groups was synthesized via an in-situ polymerization approach. Furthermore, alicyclic structures are introduced to reduce leakage current, enhance breakdown strength, and ultimately improve energy storage density. At 150 °C and 600 MV/m, a discharge energy density of 3.25 J/cm 3 is achieved, alongside a breakdown strength of 650 MV/m. This work presents a polymer dielectric for high-temperature capacitors and provides a basis for subsequent modification in the future.