UAV-DAP (unmanned aerial vehicle-digital aerial photogrammetry) has become one of the most widely used geomatics techniques in the last decade due to its low cost and capacity to generate high-density point clouds, thus demonstrating its great potential for delivering high-precision products with a spatial resolution of centimetres. The questions is, how should it be applied to obtain the best results? This research explores different flat scenarios to analyse the accuracy of this type of survey based on photogrammetric SfM (structure from motion) technology, flight planning with ground control points (GCPs), and the combination of forward and cross strips, up to the point of processing. The RMSE (root mean square error) is analysed for each scenario to verify the quality of the results. An equation is adjusted to estimate the a priori accuracy of the photogrammetric survey with digital sensors, identifying the best option for μxyz (weight coefficients depending on the layout of both the GCP and the image network) for the four scenarios studied. The UAV flights were made in Lorca (Murcia, Spain). The study area has an extension of 80 ha, which was divided into four blocks. The GCPs and checkpoints (ChPs) were measured using dual-frequency GNSS (global navigation satellite system), with a tripod and centring system on the mark at the indicated point. The photographs were post-processed using the Agisoft Metashape Professional software (64 bits). The flights were made with two multirotor UAVs, a Phantom 3 Professional and an Inspire 2, with a Zenmuse X5S camera. We verify the influence by including additional forward and/or cross strips combined with four GCPs in the corners, plus one additional GCP in the centre, in order to obtain better photogrammetric adjustments based on the preliminary flight planning.
Los RPAS (Sistemas de aeronaves pilotados a distancia) son muy utilizados en fotogrametría para la toma de imágenespor su alta resolución espacial y rapidez de respuesta, pudiendo llegar a zonas de difícil acceso, siendo importante diseñarun buen procedimiento en campo para minimizar los errores en la toma de datos. Se recomienda utilizar puntos de apoyo(PA) terrestres utilizando RPAS convencional, que no trabajan con sistemas RTK (Real Time Kinematic). Asimismo,existen en el mercado programas fotogramétricos libres y licenciados para generar modelos digitales de superficie (MDS),del terreno (MDT) y ortofotomosáicos. En este artículo se utilizan dos programas fotogramétricos para procesar imágenescapturadas con RPAS como son Agisoft Metashape y Recap Photo, utilizando puntos de apoyo y control terrestre. Elestudio se llevó a cabo en Almenara (España) donde se hizo el levantamiento topográfico con RPAS, capturándose 100imágenes digitales, en un área de 0.38 km2. Se utilizaron 6 PA con la finalidad de orientar bien las imágenes digitales enel sistema de coordenadas local y realizar de forma adecuada la georreferenciación de las imágenes obtenidas duranteel vuelo. Para la obtención del MDT se utilizó el software CloudCompare para hacer el filtrado en la nube de puntosobtenidas de ambos softwares. Los resultados muestran una diferencia en altura entre los dos MDT menor a 28 cmtomando como referencia el MDT de la nube de puntos de Agisoft metashape y en cuanto al error en los puntos apoyoRecap Photo presento mayor error.
The generation of digital aerial photogrammetry products using unmanned aerial vehicle-digital aerial photogrammetry (UAV-DAP) has become an essential task due to the increasing use of UAVs in the world of geomatics, thanks to their low cost and spatial resolution. Therefore, it is relevant to explore the performance of new digital cameras equipped in UAVs using electronic rolling shutters instead of ideal mechanical or global shutter cameras to achieve accurate and reliable photogrammetric products, if possible, while minimizing workload, especially for their application in projects that require a high level of detail. In this paper, we analyse performance using oblique images along the perimeter (3D perimeter) on a flat area, i.e., with slopes of less than 3%. The area was photogrammetrically surveyed with a DJI (Dà-Jiāng Innovations) Inspire 2 multirotor UAV equipped with a Zenmuse X5S rolling shutter camera. The photogrammetric survey was accompanied by a Global Navigation Satellite System (GNSS) survey, in which dual frequency receivers were used to determine the ground control points (GCPs) and checkpoints (CPs). The study analysed different scenarios, including the combination of forward and transversal strips and oblique images. After examining the ideal scenario with the least root mean square error (RMSE), six different combinations were analysed to find the best location for the GCPs. The most significant results indicate that the optimal calibration of the camera is obtained in scenarios including oblique images, which outperform the rest of the scenarios for achieving the lowest RMSE (2.5x the GSD in Z and 3.0x the GSD in XYZ) with optimum GCPs layout; with non-ideal GCPs layout, unacceptable errors can be achieved (11.4x the GSD in XYZ), even with ideal block geometry. The UAV-DAP rolling shutter effect can only be minimised in the scenario that uses oblique images and GCPs at the edges of the overlapping zones and the perimeter.
2 July 2023 in REVISTA AMBIENTAL AGUA, AIRE Y SUELO
Los Modelos Digitales de Terreno (MDT) son muy utilizados en el campo de la ingeniería, constituyendo la base para derivar cartografía que se puede utilizar en diversos estudios hidrológicos, como por ejemplo en estudios de inundación, así como para generar curvas de nivel y calcular movimiento de tierras entre otros. Con los Vehículos Aéreos No-Tripulados (UAV) se pueden generar estos productos con una mejor resolución espacial y temporal que con otros sensores, como sería el caso de los satélites. La calidad de los MDT generados con UAV depende de la programación de vuelo, la precisión en la medición de los Puntos de Apoyo (PA) y Puntos de control (PC), así como del postproceso de los datos y filtrado de puntos. Esta investigación analiza la precisión de los MDT’s utilizando el software fotogramétrico Agisoft Metashape (software privado) y el visor fotogramétrico Cloud compare (libre), los PC se dejaron en los bordes del área de estudio, con la finalidad de georreferenciar el modelo y evaluar la calidad del producto generado. Los puntos de control fueron medidos con GPS Topcon Hiper doble frecuencia en modo RTK con una precisión de 1.5 cm. Comparado los resultados con topografía convencional, utilizando estación total, se obtuvieron productos fotogramétricos con precisión en XYZ de 2 cm. Estos resultados indican una muy buena precisión, haciendo posible su aplicación en diversos estudios y con menor trabajo en campo con respecto a métodos tradicionales.