Traditional methods to generate non-thermal Ar–N2 plasma at low pressure conditions have predominantly utilized radiofrequency and direct current power supplies. These techniques have proven efficiency in various applications, including surface modification and microbial decontamination. However, high operational costs and the complex equipment have provoked interest in alternative approaches. This study investigates the characteristics and efficacy of Ar–N2 plasma generated under vacuum conditions using a low-frequency alternating current power supply at 6 and 9 kHz. The plasma was produced in a capacitively coupled system, with key parameters such as electron density, electron temperature, and the electron energy distribution function (EEDF) were assessed using a single Langmuir probe. Results indicate that the increased driving frequency from 6 to 9 kHz led to a decrease in electron temperature, and electron density at higher pressure, when nitrogen was introduced into the argon plasma. EEDF is shifted from a bi-Maxwellian to a Maxwellian-like shape with increased frequency at fixed power and gas pressure. Additionally, a significant degradation of Xanthomonas campestris pv. vesicatoria from to was observed following the antimicrobial treatment, suggesting its potential applications in agriculture, material processing, and sterilization.
Non-thermal plasma as an emergent technology has received considerable attention for its wide range of applications in agriculture, material synthesis, and the biomedical field due to its low cost and portability. It has promising antimicrobial properties, making it a powerful tool for bacterial decontamination. However, traditional techniques for producing non-thermal plasma frequently rely on radiofrequency (RF) devices, despite their effectiveness, are intricate and expensive. This study focuses on generating Ar-O2 capacitively coupled plasma under vacuum conditions, utilizing a low-frequency alternating current (AC) power supply, to evaluate the system’s antimicrobial efficacy. A single Langmuir probe diagnostic was used to assess the key plasma parameters such as electron density (ne), electron temperature (Te), and electron energy distribution function (EEDF). Experimental results showed that ne increases (7 × 1015 m−3 to 1.5 × 1016 m−3) with a rise in pressure and AC power. Similarly, the EEDF modified into a bi-Maxwellian distribution with an increase in AC power, showing a higher population of low-energy electrons at higher power. Finally, the generated plasma was tested for antimicrobial treatment of Xanthomonas campestris pv. Vesicatoria. It is noted that the plasma generated by the AC power supply, at a pressure of 0.5 mbar and power of 400 W for 180 s, has 75% killing efficiency. This promising result highlights the capability of the suggested approach, which may be a budget-friendly and effective technique for eliminating microbes with promising applications in agriculture, biomedicine, and food processing.
Non-thermal plasma (NTP) is a fast, reagent-free technology for dye removal, yet its performance is highly dependent on the operating conditions and on plasma–catalyst interactions. In this work, a coaxial falling-film dielectric barrier discharge (DBD) reactor was optimized for the degradation and decolorization of organic dyes, with ceria (CeO2) employed as a catalyst. For the first time, CeO2 prepared via a supercritical antisolvent (SAS) micronization route was tested in plasma-assisted dye decolorization and directly compared with its non-micronized counterpart. Optimization of plasma parameters revealed that oxygen feeding, an input voltage of 12 kV, a gas flow of 0.2 NL·min−1, and an initial dye concentration of 20 mg·L−1 resulted in the fastest decolorization kinetics. While the anionic dye Acid Yellow 36 exhibited electrostatic repulsion and negligible plasma–ceria synergy, the cationic dyes Crystal Violet and Methylene Blue showed strong adsorption on the negatively charged CeO2 surface and pronounced plasma–catalyst synergy, with SAS-derived CeO2 consistently outperforming the non-micronized powder. The SAS catalyst, characterized by a narrow particle size distribution (DLS) and spherical morphology (SEM), ensured improved dispersion and interaction with plasma-generated species, leading to significantly shorter decolorization radiation times compared to the literature benchmarks. Importantly, this enhancement translated into higher energy efficiency, with complete dye removal achieved at a lower specific energy input than both plasma-only operation and non-micronized CeO2. Scavenger tests confirmed •OH radicals as the dominant oxidants, while O3, O2•−, and e−a played secondary roles. Tests on binary dye mixtures (CV + MB) revealed synergistic decolorization under plasma-only conditions, and the CeO2-SAS catalyst maintained high overall efficiency despite competitive adsorption effects. These findings demonstrate that SAS micronization of CeO2 is an effective material-engineering strategy to unlock plasma–catalyst synergy and achieve rapid, energy-efficient dye abatement for practical wastewater treatment.