In special geology conditions such as silt-soil, foundation pits are prone to instability and severe deformation. In this paper, a composite soil nailing structure was studied and its effect on a silt-soil symmetrical foundation pit investigated. The factors affecting the stability of the pit as well as its deformation characteristics were also explored. The results show that excavation depth of the foundation pit has a significant impact on its stability. The soil outside the foundation pit is in the form of a parabola, and the uplift of the soil mainly occurs at the bottom. The horizontal displacement of soil on the side wall of the foundation pit presents a “bulk belly” form. In addition, the axial force of soil nails is larger in the middle part, and smaller at both ends in the shape of a spindle. Moreover, the horizontal displacement is positively correlated with the inclination and spacing of the soil nails, but negatively correlated with the diameter and depth of the mixing pile inlay. Furthermore, the inclination and spacing of the soil nails, the diameter, and embedded depth of the mixing pile have their own critical values for stability of the foundation pit. Specifically, in this paper, with respect to soil nails, inclination should be below 30° and prestress value should not exceed 20 kN. With respect to the mixing pile, the diameter should be less than 1.5 m; when the embedded depth of the mixing pile exceeds the critical depth, the limiting effect of the mixing pile on horizontal displacement is not significant. This research provides important takeaways for the design of a composite soil nailing structure for symmetrical foundation pits.

Under the effect of initial stress and excavation disturbance, there exists interaction between rock mass and rockbolt in deeply buried tunnels. In order to fully explore the mechanism of rock mass supported with rockbolts, this article studied the time-dependent behavior of the rock mass supported with discretely mechanically or frictionally coupled (DMFC) rockbolts. The interaction model elastic solutions under distributed force model were analyzed, then the viscoelastic analytical solutions were conducted to describe the rheological properties of the coupling model, and the solutions were acquired by setting the constitutive models of the rockbolt and rock mass in terms of a one-dimensional Kelvin model and a three-dimensional Burgers model based on material properties and dimension. Several examples were performed and the influence of initial stress σ₀, the viscosity parameters η₁ and η₂ of the three-dimensional Burgers model as well as the pre-tension T₀ on reinforcement effect were analyzed. According to the proposed model, the smaller η₂ is or the larger the pre-tension T₀ is, the more effective the support effect. However, when the pre-tension is too large, the support effect is no longer significantly enhanced. In addition, the early reinforcement effect is controlled by the first creep stage in the Burgers model while the ultimate support effect is mainly influenced by the viscosity coefficient of the second creep stage in the Burgers model. This research can provide an important theoretical reference to guide the parameter design of rockbolt reinforcement engineering in a circular symmetrical tunnel.

In this paper, we present the viscoelastic solutions for rockmass supported with discretely mechanically or frictionally coupled (DMFC) rockbolts to reveal the coupling rheological mechanisms. The analytical solutions are first acquired by applying the Laplace inverse transforms. The effect of different viscosity coefficients and supporting parameters on the coupling model rheological behavior are then investigated. It is concluded that the variation of the rockbolt axial force or rock mass stress and displacement have a close relationship with rheological parameters and support parameters. In addition, the variations of mechanical states of rockbolts and rock mass are closely related to the rheological model.