Frequent cloud cover and fast regrowth often hamper topical forest disturbance monitoring with optical data. This study aims at overcoming these limitations by combining dense time series of optical (Sentinel-2 and Landsat 8) and SAR data (Sentinel-1) for forest disturbance mapping at test sites in Peru and Gabon. We compare the accuracies of the individual disturbance maps from optical and SAR time series with the accuracies of the combined map. We further evaluate the detection accuracies by disturbance patch size and by an area-based sampling approach. The results show that the individual optical and SAR based forest disturbance detections are highly complementary, and their combination improves all accuracy measures. The overall accuracies increase by about 3% in both areas, producer accuracies of the disturbed forest class increase by up to 25% in Peru when compared to only using one sensor type. The assessment by disturbance patch size shows that the amount of detections of very small disturbances (< 0.2 ha) can almost be doubled by using both data sets: for Gabon 30% as compared to 15.7–17.5%, for Peru 80% as compared to 48.6–65.7%.

Novel radar satellite missions also include sensors operating in X-band at very high resolution. The presented study reports methodologies, algorithms and results on forest assessment utilizing such X-band satellite images, namely from TerraSAR-X and COSMO-SkyMed sensors. The proposed procedures cover advanced stereo-radargrammetric and interferometric data processing, as well as image segmentation and image classification. A core methodology is the multi-image matching concept for digital surface modeling based on geometrically constrained matching. Validation of generated surface models is made through comparison with LiDAR data, resulting in a standard deviation height error of less than 2 meters over forest. Image classification of forest regions is then based on X-band backscatter information, a canopy height model and interferometric coherence information yielding a classification accuracy above 90%. Such information is then directly used to extract forest border lines. High resolution X-band sensors deliver imagery that can be used for automatic forest assessment on a large scale.

Assessment of forest degradation has been emphasized as an important issue for emission calculations, but remote sensing based detecting of forest degradation is still in an early phase of development. The use of optical imagery for degradation assessment in the tropics is limited due to frequent cloud cover. Recent studies based on radar data often focus on classification approaches of 2D backscatter. In this study, we describe a method to detect areas affected by forest degradation from digital surface models derived from COSMO-SkyMed X-band Spotlight InSAR-Stereo Data. Two test sites with recent logging activities were chosen in Cameroon and in the Republic of Congo. Using the full resolution COSMO-SkyMed digital surface model and a 90-m resolution Shuttle Radar Topography Mission model or a mean filtered digital surface model we calculate difference models to detect canopy disturbances. The extracted disturbance gaps are aggregated to potential degradation areas and then evaluated with respect to reference areas extracted from RapidEye and Quickbird optical imagery. Results show overall accuracies above 75% for assessing degradation areas with the presented methods.

The increasing availability of dense time series of earth observation data has incited a growing interest in time series analysis for vegetation monitoring and change detection. Vegetation monitoring algorithms need to deal with several time series characteristics such as seasonality, irregular sampling intervals, and signal artefacts. While common algorithms based on deterministic harmonic regression models account for intra-annual seasonality, inter-annual variations of the seasonal pattern related to shifts in vegetation phenology due to different temperature and rainfall are usually not accounted for. We propose a transition to stochastic modelling and present a near real-time change detection method that combines a structural time series model with the Kalman filter. The model continuously adapts to new observations and allows to better separate phenology-related deviations from vegetation anomalies or land cover changes. The method is tested in a forest change detection application aiming at the assessment of damages caused by storm events and insect calamities. Forest changes are detected based on the cumulative sum control chart (CUSUM) which is used to decide if new observations deviate from model-based forecasts. The performance is evaluated in two test sites, one in Malawi (dry tropical forest) and one in Austria (temperate deciduous, coniferous and mixed forests) based on Sentinel-2 time series. Both forest areas are characterized by a distinct, but temporally varying leaf-off season. The presented change detection method shows overall accuracies above 99%, users’ accuracies of 76.8% to 88.6%, and producers’ accuracies of 68.2% to 80.4% for the forest change stratum (minimum mapping unit: 0.1 ha). Results are based on visually interpreted points derived by stratified random sampling. A further analysis revealed that increasing the time series density by merging data from two Sentinel-2 orbits yields better forest change detection accuracies in comparison to using data from one orbit only. The resulting increase in users’ accuracy amounts to 7.6%. The presented method is capable of near real-time processing and could be used for a variety of automated forest monitoring applications.

Recent developments in satellite data availability allow tropical forest monitoring to expand in two ways: (1) dense time series foster the development of new methods for mapping and monitoring dry tropical forests and (2) the combination of optical data and synthetic aperture radar (SAR) data reduces the problems resulting from frequent cloud cover and yields additional information. This paper covers both issues by analyzing the possibilities of using optical (Sentinel-2) and SAR (Sentinel-1) time series data for forest and land cover mapping for REDD+ (Reducing Emissions from Deforestation and Forest Degradation) applications in Malawi. The challenge is to combine these different data sources in order to make optimal use of their complementary information content. We compare the results of using different input data sets as well as of two methods for data combination. Results show that time-series of optical data lead to better results than mono-temporal optical data (+8% overall accuracy for forest mapping). Combination of optical and SAR data leads to further improvements: +5% in overall accuracy for land cover and +1.5% for forest mapping. With respect to the tested combination methods, the data-based combination performs slightly better (+1% overall accuracy) than the result-based Bayesian combination.