Modified nano-Sb2O3 could dramatically affect pyrolysis of fire retardant system, and improved the flame-retardant performance. Modified nano-Sb2O3 was prepared by planetary high-energy ball mill and nano-Sb2O3/ (poly butylenes terephthalate) (PBT) composite was prepared by modified Sb2O3 nano particles. Its char formation was studied via transmission electron microscope(TEM), scanning electron microscope(SEM) and Thermo-gravimetric analysis(TGA). Results indicated that nano-Sb2O3 promoted catalytic char formation of PBT effectively. The samples were carbonized at 600°C by muffle furnace and the char yield of PBT composites increased gradually with the increase of flame retardant additives. The highest char yield rate reached 6.785% when the flame retardant was 3.5 wt%, which was 12.36 times as high as that of pure PBT. Char formation could be character by TGA. At 600°C, the char yield rate of pure PBT was about 0.1% while the char yield rate increased to 5.58% when the addition of nano-Sb2O3 flame retardant was 1.5 wt%, and 7.58% when the addition was 5 wt%. The results indicated that nano-Sb2O3 flame retardants crosslinked and catalyzed PBT, promoting degradation and char formation and increasing residual carbon. The residual morphologies of the nano-Sb2O3/PBT composite were investigated through scanning electron microscopy(SEM). Results showed that the nano-Sb2O3 could change the degradation path of PBT and improved char yield and carbon layer density of nano-Sb2O3/PBT composite, which prevented heat transfer from external to internal and insulated heat and oxygen.
In order to improve the dispersion of attapulgite (ATP), the surface of ATP was modified by conventional ball milling, chemical modification and ball milling modification methods. The ATP samples were studied by XRD, FTIR, TG, TEM, etc. The research results show that the resulting ATP modified by conventional ball milling still has the secondary agglomeration phenomenon and partial damage phenomenon of its rod-like crystal. The surface of ATP can be effectively modified by silane coupling agent KH-550 using chemical modification and ball milling modification methods and their rod-like crystal cannot be damaged. The ball milling modification and dispersion effects for ATP was the best. The contact angle of the resulting ATP was increased by 189% , its specific surface area was increased by 218% , and the volume of the bundles and the sedimentation rate were decreased.
11 August 2016 in Inorganic and Nano-Metal Chemistry
Using cetyltrimethylammonium bromide, polyethylene glycol (PEG-4000), and their composites as surfactants, the surface of Sb2O3 nanoparticles was modified by mechanochemical method based on high-energy ball milling. The microstructures, dispersibility, and hydrophobicity of the resulting Sb2O3 nanoparticles were characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and surface contact angle measurement. The results showed that there was no obvious change in the crystal structure of Sb2O3 nanoparticles after surface modification. The resulting Sb2O3 nanoparticles were successfully coated by the experimental surfactants, which led the particles to have better dispersibility than that of unmodified Sb2O3 nanoparticles. Besides, the Sb2O3 nanoparticles modified by compound surfactants exhibited the highest hydrophobicity with surface contact angle of 126.7°.
In this study, the cationic surfactant cetyl trimethyl ammonium bromide (CTAB) and silane coupling agent N-(β-aminoethyl)-γ-aminopropylmethylbimethoxy silane (KH602) were used as modifiers to improve the interfacial bonding strength between basalt fiber (BF) and PBT matrix. Using single modified and compound modified BF as reinforcing fillers, BF/nano-Sb2O3/BEO-PBT composites were prepared by injection molding. The structure characteristics of modifiers on the surface of BF were studied by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The mechanical, crystallization, thermomechanical properties and flame retardancy of BF/nano-Sb2O3/BEO-PBT composites were investigated using the tensile testing machine, impact testing machine, scanning electron microscopy (SEM), differential scanning calorimeter (DSC), dynamic mechanical analyzer (DMA), limiting oxygen index (LOI) and vertical combustion tester, respectively. The results showed that the CTAB and KH602 were successfully introduced into the surface of BF and the interfacial bonding strength between BF and PBT matrix was increased. The addition of BF did not reduce the flame retardancy of nano-Sb2O3/BEO-PBT composites. The tensile strength and Young's modulus of the BF/nano-Sb2O3/BEO-PBT composites were significantly improved and the notch impact strength was slightly increased with the use of modified BF. In terms of the mechanical properties of BF/nano-Sb2O3/BEO-PBT composites, the BF obtained an excellent enhancement effect on the composites when modifiers were applied by means of the compound modification with CTAB and KH602.